Question about 1995 GMC Sierra
Will crank and crank and crank but will not turn over
Check to see if it has spark an fuel , find out what's not working first ! Ignition or fuel pump ! Pull a plug wire an stick a screw driver in the end an hold close to metal on the engine an have someone crank over the engine , if you don't have spark check for battery voltage at the coil ! does you vehicle have a tachometer ? When you crank the engine over does the tachometer move ? That's a sign the crankshaft position sensor is working or not ! Does the check engine light lit up when you turn on the key ? If it has spark ,spray some carburetor cleaner into the engine through the throttle plate . If it then tries to start you have a fuel delivery problem , fuel pump maybe ! Don't just check the fuse's that's not going to tell you a whole lot , in the time it takes you to pull fuse's an check them I would have figured out what's missing spark , fuel or compression !
Posted on Apr 28, 2015
Check the fuses first
Posted on Apr 28, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its a long process,you need a steering wheel puller, once its off take the hazard button assembly out, take the turn signal loose, pull old ignition out, carefully install new one, and reverse procedure and always if u get confused i would highly recomend
a chiltons manual they explain things great
Posted on Feb 16, 2009
Hey there.You can purchase a door pin and bushing repair kit to tighten up the hinge area,requires removing the door to replace.If the hinge area is worn to badly,the brass bushings willnot last.Also your window crank handle is held on by a C-clip behind the handle in between the plastic shim and the handle which requires a special tool to remove or a small screwdriver to get the clip off.It is hard to see.The shaft that the handle is on are known to wear also and if thats the case you will need to have the window regulator replaced.Hope this helps.John.
Posted on Mar 10, 2009
It sounds like you either have an condensor fan problem or low freon. The condensor fan is near the radiator. In some cases the radiator fan doubles as the condensor fan. So look there too.
Posted on May 09, 2009
Tips for a great answer:
Mar 06, 2015 | 2008 Chrysler Town & Country
Jan 23, 2015 | Renault Cars & Trucks
Oct 12, 2012 | 1995 Jeep Wrangler
Apr 27, 2012 | 1995 Mitsubishi Eclipse
Sep 23, 2010 | 2009 Audi A4
Sep 04, 2010 | 1995 Honda Civic
May 21, 2010 | 2000 Honda Accord
Jun 08, 2009 | 2004 Cadillac Escalade
Jun 24, 2017 | 1995 GMC Sierra
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: