Question about Mazda Cars & Trucks

Open Question

How to adjust headlights on 98 Mazda B2500? - Mazda Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: Need fuse diagram for mazda b2500

go to the link below and choose the 1998 ford ranger as the truck, they are the same, then follow the link to ford site and download the 1998 ranger owners manual, the fuse diagrams are in there
http://www.edmunds.com/ownership/howto/articles/120189/article.html

Posted on Sep 16, 2009

  • 1986 Answers

SOURCE: Can't find the adjustment knob for the headlights on a 2008 Mazda

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

  • 1986 Answers

SOURCE: How do you adjust the headlights on a 2002 Mazda Miata?

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Sep 30, 2009

RufAsGuts
  • 32 Answers

SOURCE: mazda bravo blowing white smoke

With regards to the above problem, I have just recently experienced the exact same thing with a 98 Mazda Bravo b2500 (this is a diesel).The symptoms were after driving over some corrugated dirt roads the vehicle would not rev over 2000 rpm and at that point would blow heaps of white smoke and misfire, but would idle beautifully and rev smoothly up to the 2000 rpm. Also noticed when vehicle was cold it would drive good for about 5-10 mins then symptoms would start again.

Fuel filters were changed, sediment trap cleaned,different fuel tried and checked all lines and system for air entry, problem still persisted. While checking injector pump lift pump pressure I noticed that the pressure would drop right off at the 2000 rpm, maybe a lift pump problem?? After consulting the workshop manual I found there is a small stainless steel thimble filter under the injector pump fuel line input union bolt, held in place with a small spring. Pulled this out to have a look and it was full of crud, cleaned it all up and put back together and have a guess what......goes like a brand new truck!!

Cheers

Posted on Jul 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where's the thermostat to my 98 Mazda truck 5speed b2500


Follow the top hose from the rad to the engine block, there should be a gard housing at the end of it, ....the housing should attach to the engine bloxk with a few bolts, the thermostat should be under that.

Jul 19, 2015 | Mazda Cars & Trucks

1 Answer

My 98' Mazda b2500 keeps dying. Changed the alt and battery. Someone told me it was the voltage regulator ut someone else said its built in the alternator. Can you please help me.


Keeps dying? Do you have to boost it? The voltage regulator is internal to the alternator. Is there power to the alternator to turn it on? LOts of could be's here without more info

Apr 10, 2015 | 1998 Mazda B-Series

1 Answer

Cx seven timing installation


Where are the timing belt marks on a 98 mazda B2500

Feb 05, 2013 | 2007 Mazda CX-7 Grand Touring

1 Answer

Where is the flasher module in a 98 b2500 mazda pick up


It is the same as the a Ford ranger. The location is Under the dash to the left of the steering column.

Jul 24, 2012 | 1998 Mazda Pickup

1 Answer

Bettyboop9288@yahoo.comcannot find location of my thermostat on my 98 mazda b2500 .i need a diagram so i can replace it


most of the time if you just follow the top radiator hose to where it connects at the top of the engine there will be a housing there that the hose connect to and normally if you unbolt that housing from the engine the thermostat is right there. good luck

Nov 10, 2010 | 1998 Mazda Pickup

1 Answer

98 mazda b2500-my turning signal/hazard lights no longer work


You need to replace the flasher module, this is the module that controls the "Blinking" function of the lights, its a mostly a common part that you can get at any auto parts store for less than 10 bucks and is located in the Fuse panel under the dash, its round in shape in one corner of the panel. mostly they are green in color.

Oct 02, 2009 | 1998 Mazda Pickup

1 Answer

I need step by step instructions on how to replace the rotors and brake pads on my 98 b2500 mazda


go to www.autozone.com and register for free. It is a full free online repair manual with everything you could need for your truck. If you have any questions, feel free to ask. I have been an automechanic for -10 years

Sep 09, 2009 | 1998 Mazda B-Series

1 Answer

Where is the door switch? mine acts like the door isnt closeing and the interior light wont go off


I could not find this switch either, It is actually located in the door latch on the door jam. Switch is somewhere inside. Took my truck to mazda dealer and had it replaced. Anoying problem.

Apr 23, 2009 | Mazda B-Series Truck Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...