Question about Cars & Trucks

Open Question

The 5 wires at the mass air flow sensor if there are 2 tan wires 1 yellow 1 pink 1 black if the iat sensor wires are saposta be black and tan with tan one do i use

With the harness pluged in at the mass air flow sensor the 2 tan wires are side by side toward the engine then the yellow then the pink then the black ?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 331 Answers

SOURCE: mass air flow sensor

<SOHC, Federal - Non Turbo,Canada - Non Turbo>

1d0cd9b.jpg ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------=====================================================================================================================================

<California - DOHC Non Turbo, Turbo>


Posted on Oct 18, 2008

  • 35 Answers

SOURCE: I ordered a performance chip and it said hook it

What is your question? If you are wondering if these 2 sensors are together, they are.

Posted on Jun 19, 2009

  • 147 Answers

SOURCE: Repalced O2 sensors, mass air flow sensor, and plugs error messag

dpfe velve

small emissions valve with one electrical connnector and three to four vacume lines located near your egr valve. this is a comon fault on fords emmissions system.

Posted on Aug 15, 2009

  • 1 Answer


Location of ATI sensor on a 2006 HHR LT 2.4L

Posted on Nov 04, 2010

  • 1 Answer

SOURCE: sensor IAT

where is IAT sensor located in toyota yaris?

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2008 Pontiac G5 I was wanting to install a performance chip to it. It says to connect it to the IAT senor which has 5wires witch wires are for the IAT

The other three wires are for the Mass air flow sensor . That's a new one for me , performance chips or turners are used through the DLC . You program the engine computer . I have no idea what they can do from the intake air temp. sensor .The tan an lit blue wires are for the IAT sensor !

Oct 15, 2015 | Pontiac Cars & Trucks

1 Answer

2008 impala lt wire colors for iat sensor

According to the wiring diagram, the sensor is a part of the Mass Air Flow meter.
Pink Black is power, black white is ground, and tan - tan black - yellow go to the ECM.

Apr 03, 2013 | Cars & Trucks

2 Answers

The wires on my mass air flow sensor were broken (3)of them could you help me out as my new pigtail has different color wires and i would like to make sure i wire it right

Hi, does the sensor have letters A-E on the terminals? Normally the connector on the harness should slip right into the sensor. Does your sensor just have wires to be soldered--no receptacle? I have pasted the harness wire colors below for the 6.0 liter engine, including the terminal letter for each wire. If the sensor does not have letters, you will need to run a test to see which end begins with terminal "A". Since terminals A and B comprise the IAT, which is a thermister, you could use an ohmmeter on the 2 end terminals to see if the resistance changes with ambient temperature. Do not touch either sensor, but blow hot air on the IAT to see if the resistance changes with temp. Whiched 2 end terminals yield this temp sensitivity are terminals A and B.



Jul 07, 2011 | 2001 GMC Sierra 2500HD

1 Answer

Can you tell me what colors the two IAT wires are on a 2004 Toyota Tacoma 2.7L as they go into the mass air flow sensor?

The wires going into the MAF are as follows:

White/Red = Ignition voltage

Blue/Black = E2

Black/White = E2G

Yellow/Green = THA (This is the IAT signal to the PCM)

Gray = VG

Feb 25, 2011 | Toyota Tacoma Cars & Trucks

1 Answer

What are the color codes for the iat sensor on a 2008 chevy vortec 5.3

The color codes are tan and a tan/black. There are 2 wires that go into the mass air flow sensor, fyi dont buy or put a resistor in this spot, it tells your engine its getting colder air than it actually is and doesnt help anything. If you buy it you will decide to return it, but then you just lost on shipping cost, and a resistor is about a dime in cost.

Dec 19, 2010 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

Which wire does what on the IAT/MAS trying to find which ones go to IAT on a 2004 yukon 5.3

black/white goes to ground
black is ref DC from the PCM for the IAT
Tan is the IAT signal to the PCM
Pink is 12 volt power to the MAF sensor
Yellow is the MAF signal to the PCM


Oct 25, 2010 | 2004 GMC Yukon

2 Answers

I need to know the color of the IAT wires for my 2006 monte carlo ss 5.3 Liter engine

Pink Black and is power white is ground sometimes it has a green stripe and black is reference voltage.

Jan 26, 2010 | 2006 Chevrolet Monte Carlo

1 Answer

2002 chev avalanche mat sensor

I assume you are looking for the wiring for the IAT because MAT sensors are no longer used..

here you go

black / white - PCM ground
pink - fused 12-volts
yellow - MAF signal
tan - IAT sensor signal
black - IAT sensor ground

manifold temp. sensors are no loner used.

I believe you are looking for the IAT "intake air temp sensor" which is part of the mass air flow sensor.

good luck

Jun 16, 2009 | 2002 Chevrolet Avalanche

1 Answer

IAT sensor

the iat 5 volt referance is tan/black in pin d- the sensor return is tan on e-maf sensor ignition power is pink in b cavity- c is ground and black/white -a is the maf signal and yellow

Nov 12, 2008 | Daewoo Lanos Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides