Question about 1998 Ford Crown Victoria

2 Answers

How to remove starter from 1998 ford crown victoria

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,422 Answers

Discorrect the negitive battery terminal .
Jack up the front I belive its on the drivers side if I remember correctly ware the engine and transmission bolt together .You just need to get it high enough so you can get under the vehicle but PUT A JACK STAND under the vehicle after you jack it up .
The rest is easy remove the 2 large bolts mounting the starter to the block you may need to find the correct aditude to turn it to get to slide out but it will come out .Bring a block of wood or something to rest it on the wires may not be long enough to reach the ground .
Remove the large copper nut for the power cable and the smaller wire witch will likely be a plug in connecter.
Install in reverse order you will need a 5/8 s scocket and a 12 or 13 mm box wrench for the copper nut .clean the contact cable to the starter it needs to be a good conection fine sand paper .

Posted on Apr 27, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

There should only be two bolts holding it on all u have to do is disconnect the power wire then the ground wire and take the rwo bolts off and you should be fine.
If when u start the install of the new starter and the bolts are having a hard time lining up you can get a scissor jack to push it up in just the right spot. Also whenever your working with electricity disconnect the battery

Posted on Apr 27, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4369 Answers

SOURCE: 1998 ford crown victoria fuse box diagram

it should be in your owner manual. if not, I can look up something for you but can't post illustrations to this site.

Posted on Jan 09, 2009

  • 45 Answers

SOURCE: how to remove starter from 1995 ford crown victoria

yes they are very difficult to get to.
its just the top one and some mechanics leave them out after starter replacement.
it sounds bad but true.
i use either a stubby 10 mm wrench and a prybar to break it loose,
or a 3/8 ratchet and a wobble extenion and socket. it has to be the perfect length using different extensions to reach and still fit with the ratchet handle at the back of the starter.
sorry but it can be done.....
no stubby wrench, cut one

Posted on Feb 11, 2009

csmock132
  • 4669 Answers

SOURCE: wher is the starter on my 93 Crown victoria

Rear of engine, passenger side, right above the oil pan.

Posted on Mar 09, 2009

CLEONTI
  • 33 Answers

SOURCE: need wiring diagram for 2008 ford crown victoria

Hello,

You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.

Hope this helps,

Chris

Posted on Mar 23, 2009

REMiK92
  • 1 Answer

SOURCE: i need a diagram for a 1998 ford crown vic interior fuse box

ITS FUSE #16 AND ITS a 20A FUSE

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 V8 4.6l. It turns over, but why won't it start?


Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

Oct 19, 2015 | Ford Crown Victoria Cars & Trucks

1 Answer

How to replace 1993 Ford Crown Victoria starter


The starter will be under the car on the passenger side. You will need to raise and support the vehicle. There will be two bolts that hold the starter onto the transmission. Remove those two bolts and lower the starter. You can then remove the positive cable end and the smaller start terminal wire. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 26, 2012 | 1993 Ford Crown Victoria

1 Answer

Changing the heater core on a 1998 Crown Victoria


this job is not for the faint of heart! the dash board must be removed! if you would like to proceed email me and ill guide u the rest of the way

Mar 19, 2010 | 1998 Ford Crown Victoria

1 Answer

How to change a fuel pump on 1998 ford crown


you have to remove the fuel tank- it is located inside the tank

Feb 16, 2010 | 1998 Ford Crown Victoria

1 Answer

Cant start my crown vic 1998


ignition switch or starter relay or a wiring problem

Oct 03, 2009 | 1998 Ford Crown Victoria

1 Answer

Starting 1998 Ford Crown Victoria


try a jump...if still clicking...then replace starter/solenoid together. the solenoid is mounted on the starter.....but they both come when purchasing a new or rebuilt starter .....and a better deal eliminates both problems.....o the starter is located at the flywheel area....GL

Jul 25, 2009 | 1998 Ford Crown Victoria

Not finding what you are looking for?
1998 Ford Crown Victoria Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...