Question about 2003 Ford Taurus

3 Answers

What is the order the bolts should be tightened and how many lbs psi

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

I can't help without the application the bolts are associated. What are you fastening with the bolts in question. In the shop manual for the car it gives the torque specs for the bolts associated with the applications on the car, Go to your nearby library and check out the shop manual for your car and look up the torque specs.

Posted on Apr 28, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 6 Answers

What bolts are you talking about?

Posted on Apr 27, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 3,519 Answers

Hi Joe:
You've got me tricked.
Which bolts?
PSI refers to air pressure. Are we working on tires?

Posted on Apr 27, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cylinder head tighten torque


Have a look on this link. You may be able to find your car:

SPECIFICATION LOOKUPS

Cylinder head bolts are usually tightened to around 65 ft-lbs, depending on what the car is.

There's more than 4 cylinder head bolts... There's usually 10 bolts.
There's also a sequence for tightening the bolts:

cylinder head tightening order Google Search

When tightening cylinder head bolts do it in 'stages' and follow the sequence .. ie.. tighten the bolts finger tight first, then torque them up to about 25 ft-lbs. Wait 2 minutes.

Then tighten them to about 45 ft-lbs in sequence. Wait 2 minutes.

Do it again up to about 55 ft-lbs. Wait 2 minutes.

Tighten them up to 65 ft-lbs or whatever is recommended for your car.

Tightening in order/sequence pulls the cylinder head evenly onto the block. Waiting 2 minutes between stages allows a 'stretched' bolt to 'settle'.

Feb 17, 2016 | Cars & Trucks

1 Answer

Torque the cylinder head bolts for mitsubishi lancer 2002


Try this
I dont know which engine you have.

420a
1. Torque all center bolts to 25 ft-lbs, torque the 4 corner bolts to 25 ft-lbs
2. Torque all center bolts to 50 ft-lbs, torque the 4 corner bolts to 50 ft-lbs
3. Re-Torque all center bolts to 50 ft-lbs, re-torque the 4 corner bolts to 50 ft-lbs
4. Tighten all bolts in the sequence from #1-#10 an additional 1/4 turn.

7-Bolt 4G63
1. Torque all bolt to 58 ft-lbs in order
2. Loosen all bolts completely to 0 ft-lbs
3. Torque all bolts to 15 ft-lbs in order
4. Tighten all bolt 1/4 turn in order
5. Tighten all bolts an additional 1/4 turn in order.

ARP Head Studs
1. Tighten all bolts to 40 ft-lbs
2. Tighten in steps of 10 ft-lbs increments until the specified torque that you are looking for is reached. This can vary with the amount of boost you plan on running.

Jun 30, 2011 | 2002 Mitsubishi Lancer

2 Answers

Dear expert What are the cylinder head bolt torque settings for the 4.0L MFI straight 6 engine? Regards Dave


Here are the specs and sequence:

0900c152800a9943.gif

Install the cylinder head and bolts. The threads of bolt No. 11 must be coated with Loctite® 592 sealant before installation. Tighten the bolts in 3 steps, using the correct sequence:

  1. Tighten all bolts to 22 ft. lbs. (30 Nm).
  2. Tighten all bolts to 45 ft. lbs. (61 Nm).
  3. Retighten all bolts to 45 ft. lbs. (61 Nm).
  4. Tighten bolts 1 through 10 in sequence to 110 ft. lbs. (150 Nm).
  5. Tighten bolt 11 to 100 ft. lbs. (136 Nm)
  6. Tighten bolts 12 through 14 to 110 ft. lbs. (150 Nm)

May 04, 2011 | 1996 Jeep Grand Cherokee

1 Answer

Hi i'm eduardo and i have a '94 nissan pathfinder 4wd...engine 3.0.... i want to know the head torque specifications .


Hi Eduardo:
Check this information (click over pics for zoom)...

zjlimited_1062.jpg

Fig. 20: Exploded view of the cylinder head assembly-VG30E engine


zjlimited_1063.jpg

Fig. 15: Cylinder head loosening sequence-VG30i and VG30E engines


zjlimited_1064.jpg

Fig. 17: Cylinder head torque sequence-VG30i and VG30E engines


Install the cylinder head with a new gasket. Apply clean engine oil to the bolt threads and seats, then install the bolts with washers (beveled edges up) in the correct position. Note that bolts 4, 5, 12 and 13 measure 5.00 in. (127mm), and are longer than the others. The other bolts are 4.17 in. (106mm) long.

Tighten the bolts in the proper sequence, in the following stages:
Tighten all bolts, in order, to 22 ft. lbs. (29 Nm).
Tighten all bolts, in order, to 43 ft. lbs. (59 Nm).
Loosen all bolts completely.
Tighten all bolts, in order, to 22 ft. lbs. (29 Nm).
Tighten all bolts, in order, to 40-47 ft. lbs. (54-64 Nm). Or, if you have an angle torque wrench available, tighten them an additional 60-65 degrees.


Hope this helps; remember to rate this answer. Good luck.

Apr 22, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

Torque for head for a 2.5 for an 1985 Buick Skylark


Loosen Headbolts in this order:

1 5 4
3 6 2

Tighten Headbolts in this order:

3 1 6
5 2 4

Following the tightening order, torque Head Bolts as following:

1. Torque All to 22 Ft Lbs
2. Torque all to 51 Ft Lbs
3. Loosen all 180 degrees
4. Loosen all 180 degrees
5. Torque Center Two bolts to 25 Ft Lbs
6. Torque Outer 4 bolts to 11 Ft Lbs
7. Tighten all bolts 90 degrees
8. Tighten all bolts 90 degrees again

Make sure you tighten all of them down the first 90* and then go back and tighten them another 90*. Also make sure you put some lube between the bolt and the washer, and put some sealant on the bolt threads. Use GM Thread Sealant.

Jan 14, 2011 | 1985 Buick Skylark

1 Answer

What is the head bolt toqure sequence for a 1990 jeep cherokee 4.0 I6 and the torque specs for the head bolts


Here is a picture of the torque procedure.
Bolt #11 threads must be coated with loctite 592 sealant before installation

Tighten all bolts in order to 22 Ft/Lbs.
Tighten all bolts in order to 45 Ft/Lbs
ReTighten all bolts in order to 45 Ft/Lbs
Tighten bolts 1-10 in order to 110 Ft/Lbs
Tighten bolt 11 to 100 Ft/Lbs
Tighten bolts 12-14 to 110 Ft/Lbs


chuckster57_4.gif

Dec 28, 2010 | 1998 Jeep Cherokee

1 Answer

Head bolt specs for a 91 honda accord 2.2l


Tighten the bolts in a pattern as such; 8 6 2 4 10
9 3 1 5 7 So if you were looking straight down onto the head, the first bolt you'd tighten would be the center one, closest to you. The second bolt you'd tighten is the center one farthest from you. The 3rd would be one left for middle closest to you, 4th would be one right from center, farther from you...Make sence? Tighten them all in that sequence, to 29 ft-lbs. After they are all tightened in that order, start from 1 and tighten them all to 51ft-lbs. Then finally, tighten them all down to 72ft-lbs. Make sure to follow that order every time. If a bolt makes a wierd noise while you are tightening it, loosen the bolt, and retorque it from the 1st step.

Jun 12, 2010 | 1991 Honda Accord

1 Answer

I need to find the torque specs for the connecting piston rod? also the sequence and torque for the cylinder head bolts this is for a kia rio 2004 6cyl


22 - 24 ft. lbs. for the rod caps and....
110795143Cylinder Head Tightening Torque and Sequence.

Tighten cylinder head bolts in order shown.
Tightening torque: 36.1 ft. lbs. (49 Nm, 5 kg-m)

Loosen bolts in reverse of order shown.

Retighten cylinder head bolts in order shown.
Tightening torque: 18 ft. lbs. (25 Nm, 2.5 kg-m)

Mark cylinder head bolts for rotational reference.
Rotate cylinder head bolts 90°(1/4 Turn) in order shown.

CAUTION:
  • Do not reuse the old cylinder head bolts.

May 31, 2010 | 2004 Kia Rio

1 Answer

2000 2.0 petrol pt cruiser head bolt torque?


Use a torque wrench to tighten the bolts in the following order:
  1. Tighten all center bolts to 34 Nm (25 ft.-lbs.).
  2. Tighten the four corner bolts to 27 Nm (20 ft.-lbs.).
  3. Tighten all center bolts to 68 Nm (50 ft.-lbs.).
  4. Tighten the four corner bolts to 47 Nm (35 ft.-lbs.).
  5. Retighten all bolts a second time to the same specifications in step 4 to double-check torque.
  6. Finish by tightening all bolts an additional 1/4 turn.

Nov 11, 2009 | 2001 Chrysler PT Cruiser

1 Answer

I have a subaru ej20 turbo engine i am changing the head gaskits will be replasing them with steel head gaskits and need two know the tork settings can you help


Information taken from Subaru Impreza workshop manual.

Apply a coat of oil to washer and bolt threads.
First tighten all bolts to 29nm (22ft lbs) in this order.
Looking at head with front of engine on your left hand side
Top Middle
Bottom Middle
Top Left
Bottom Right
Bottom Left
Top Right
After doing this tighten them further to 69nm (51ft lbs) in the same order as above.
Back off (loosen) all bolts 180 degrees in same order as above.
Then back them off again another 180 degrees.
Tighten all bolts in the order above to 29nm (22ft lbs) followed by a further 80 to 90 degrees
Tighten all bolts in order as above a further 40 - 45 degrees
Tighten bolts Top Middle and Bottom Middle another 40 - 45 degrees

Job done.

Sep 15, 2009 | 1995 Subaru Impreza

Not finding what you are looking for?
2003 Ford Taurus Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...