Question about 2007 Dodge Durango

3 Answers

2007 dodge durangos brake light came on then the brake pedal got really hard to press so i replaced the whole braking system and it was good for 2 days now the brake is hard esp bas brake lights on

Posted by on

  • Jesse Blair Apr 29, 2015

    I tried everything you guys suggested now i have a good brake but esp bas brake and abs lights are on and the car wont shift out of drive wtf need help


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 253 Answers

Just make sure you flush the system before you put a new break booster on if she is an old unit...made that mistake before and bought 2 new boosters instead of one

Posted on Apr 27, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 880 Answers

Bad brake booster

Posted on Apr 27, 2015

  • Jesse Blair Apr 27, 2015

    Thanks guys all good answers and im on my second i will check the hose to the booster and i will try flushung the system thank you i will let you know if anything helped y


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 5,313 Answers

If your truck has a brake booster, I suspect the vacuum hose to the booster has gotten fuel into it or just gotten old and is collapsing inside.

Posted on Apr 27, 2015

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: brake problems 1993 ford t-bird sc

check the master cylinder and the ABS system

Posted on Apr 26, 2009

  • 131 Answers

SOURCE: brake lights don't work on my 04 dodge durango

get yourself a cheap multimeter from a store like radio shack etc. with someone pressing the brake check at the socket to see if you have any power. remember it is DC volts not AC.. if you dont have any power check the grounds, there are a few, under the truck, and under the hood by the engine,if that doesn't work, you can try popping the rear covers off at the back and you might have loose wires, give a light tug on the wires and see if any pull away from the body.... look close at the bulb plug, you can also have a loose wire there or a broken ground tab... hopfully this can help you... if you have any more of a problem let me know...

Posted on Jun 09, 2009

  • 1 Answer

SOURCE: 1999 Dodge Durango. Brake Light and the ABS Light

If you backup lights are not working as well, I would say check the fuse for the backup lights, if the fuse is good, see if you are getting power to that fuse. We had this problem and after weeks of searching and changing sensors, we found the backup light fuse was good, but not getting power. Ran a wire from that fuse to the cig. lighter fuse and all woprksf great.

Posted on Jul 10, 2009

  • 25 Answers

SOURCE: Brake lights stick while driving but turn off when pressing brake


Posted on Jul 23, 2009

  • 2272 Answers

SOURCE: the ESP/BAS light keeps coming

Have you unhooked your battery for something? You might try making sure the stability control's steering sensor is correct...

Basically, start the car turn the wheel all the way left to the stop, all the way right, then back to center. This lets the stability control know where "center" is.
Try this:
1) Disconnect your battery, wait 1 minute & just turn on the lights for a second as to remove any residual current from the computer.The lights will not come on but still turn ON.
2) Re-connect the battery, this should have cleared all of the lights except for the ESP\BAS light.
3) Start the car, center the wheels, turn all the way to the left then all the way to the right. This should clear the ESP\BAS light.
------- If still the same problem then the esp/bas module needs to be checked and reprogrammed by the dealer to turn it off. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do I tighten my brakes when I press the brake pedal

The only basic thing most (non-technical) people can do is to check the brake fluid level and replenish that, if you still have problems after a few 'pumps' on the brake, there might be a problem on your brake system. (Which is quite a complex hydraulic system.)

You should first have a qualified person check your brake pads, if they are very worn, more brake fluid is required to fill the cylinders.

When that is fixed, they should check the master cylinder and brake linings for any leaks.

Hope this helps.

Dec 18, 2014 | 2005 Dodge Durango

1 Answer

I have spongy brakes on my 2001 durango and when you press the brake pedal it starts to brake then grabs . how do i fix

first try bleeding the system by one person pumping and holding the pedal down ,while pedal is depressed open the bleeding nipple at the wheel to let air ,fluid out and repaet same procedure 2 to three times on all 4 wheels ,remember to top up brake fluid while doing so <if no success rather get a qualified person to inspect the brakes as it could be as simple as adjustment or as serious as master cylinder failure which can be critical safety component ,GOOD LUCK

Jan 15, 2014 | Dodge Cars & Trucks

1 Answer

1999 dodge durango soft brake pedal only wen i start it

have someone have there foot on the brake & start vehicle, inspect the flexible brakelines to see if any are balooning out. You could also clamp off one flexible line at a time & press brake & when you find the brake at fault the pedal will go hard.

Oct 12, 2012 | 1999 Dodge Durango

1 Answer

I have replaced the brakes, rotors, calipers and master cylinder on a 2003 dodge durango, i bench bleed the master cylinder, and have spent 2 days now bleeding the brakes, only to end up with a spongy...

sorry you went thru all of that... those vehicles have an issue with power brake boosters. one more thing to replace...Or, you still have air in the system...

Jul 10, 2010 | 2003 Dodge Durango

1 Answer

What could csuse tha brake lights to stop working on a 2002 dodge durango

the brakes works off a switch which has a plunger style button that applies the brake lights on upon pressing the brake pedal

it is located by this brake pedal

yours is burnt out it seems

Mar 13, 2010 | 2002 Dodge Durango

1 Answer

Brake lights don't work, the cruise does, all the

1. check the brake light bulbs. if busted replace. 2. check the brake light switch near the brake pedal. make sure the wires are fitted correctly. 3. check the fuse. if busted replace.

Dec 24, 2009 | 2001 Dodge Durango

1 Answer

My 2002 dodge durango brake lights dont work even after replacing bulb and fuse

there is a switch under the dash that when u press brake pedal it compresses switch and turns on light, look under dash and look at arm on break pedal towards the firewall, is switch broken and if not test both wires with probe while pressing pedal and both should be hot while pressing pedal if not bad switch

Jul 08, 2009 | 2002 Dodge Durango

1 Answer

All lights work on the rear except the three brake lights

Sounds like the brake light switch has a problem. Located above brake pedal and activated with the brake pedal arm. Check for power going in and coming out when you apply the brake.

May 24, 2009 | 1999 Dodge Durango

1 Answer

Brake lights out; bulb, fuse okay

Sounds like you need to replace your brake light switch.  It is located on your brake pedal and you should be able to pick it up for around $20-$30 at your local parts store.

May 19, 2009 | 2003 Dodge Durango

1 Answer

2005 dodge durango, brake lights will not shut off

Check the brake light switch (aka stoplight switch) mounted high up on the brake pedal. Some have an adjustment, which hopefully is all that is wrong, it must be adjusted. Try pulling the brake pedal up, do the brake lights go off? If they do, then it needs to be adjusted.

May 05, 2009 | 2001 Dodge Durango

Not finding what you are looking for?
2007 Dodge Durango Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides