Question about Lexus Cars & Trucks
Sounds like a bad battery . recommend going to a battery retailer and asking them to test the car battery and alternator. You may need a replacement battery or have alternator fixed depending on result of battery test. You may be able to phone a person to come out to look at the battery. Like holler a Marshall as an example
Posted on Apr 26, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
chances are you don't have to replace the computer. the reason i tell you this is because you did not mention that the car is running lousy. no complaints of rough idle or missfire or hard starting. chances are that your engine speed sensor which sends the signal to the computer which then controls the transmission is most likely the culprit.. and it could just bhe that there is a loose connection between the two. if that is ok then your transmission control module is faulty. this is not the main computer, but the gobetween the trans and the ecm.. hope this helps please rate this...thanks(btw....the knock sensors control timing not the trans mission)
Posted on Sep 03, 2008
according to the manual i have... it has three.... one in the exhaust manifold.... and two in the exhaust pipe..... slightly vauge on the exact location of the last two sensors... but looks like it is after the catylitic converter.
Posted on Apr 15, 2009
SOURCE: blown fuse 2007 lexus es 350
LOOK FOR THE FUSE BOX IT WILL SAY [ CL ]for CIG LIGHTER FUSE MITE BE A 30 JUST LOOK FOR THE FUSE BOX OR SEE LEXUS DEALER IT AN 2007 MAYBE 35DOLLARS OR LOOK YOURSELF
Posted on Apr 25, 2009
Open the deck lid (trunk) to better access the lights. There will be 2 of them. Recommend replacing both at the same time even if only one has failed. Generally sold in pairs anyway.
Directly above the license plate will be mounted 2 clear light covers. On the right side of each light cover you can see a small plastic rivet. Push in the center 1/4 inch with a small screwdriver then you will be able to pry out and remove the rivet without damaging it. This will save you from buying replacement plastic rivets for re-installation. Remove the light cover with the bulb harness attached.
The bulb harness requires a short turn counter clockwise to remove it from the light cover and the new bulbs snap into the harness. No twisting or screwing. Replace the bulb harness the same way and fasten the light cover back into place using the plastic rivet.
Saves time because both bulbs and light covers are exactly the same style, there is no left or right. Cheers!
Posted on May 11, 2009
Tips for a great answer:
Jun 09, 2014 | Cars & Trucks
Jan 22, 2014 | 2001 Pontiac Grand Am
Nov 05, 2013 | 2003 Chevrolet TrailBlazer
Feb 12, 2013 | 1999 GMC Jimmy
Jun 02, 2012 | 1990 Ford Probe
May 12, 2012 | 1999 Ford Taurus
Feb 06, 2012 | Peugeot Cars & Trucks
Dec 17, 2017 | Mercury Mystique Cars & Trucks
May 06, 2009 | 1998 Chevrolet Cavalier
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: