Question about 2006 Pontiac Grand Prix

2 Answers

I have a 2006 pontiac Grand Prix v6 supercharged. I broke the bolt to the tension pully on the super charge belt. How do I remove broken bolt? Please help.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 1,140 Answers

Use a easy out screw and bolt extractor. It attaches to any size drill. Do a computer search for " easy out screw extractor ".

Posted on Apr 27, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 2,182 Answers

Take a look at YouTube on how to remove broken bolts
As there are quite a few methods pick the one you are happiest with

Posted on Apr 27, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: serpertine belt diagram

0900c152800a326f.gif
Copyright © 2002 Delmar, All Rights Reserved.

Posted on Oct 19, 2008

  • 1 Answer

SOURCE: '98 grand prix GTP belt tensioner replacement

I didnt have to remove my alternator, I just used a 15 mm wrench to remove the left-hand threaded bolt holding the tensioner on. hope this helps

Posted on Jul 21, 2009

c17hydro
  • 2984 Answers

SOURCE: I need a diagram of the routing of a serpentine

Here ya go:


07ea531.gif

Posted on Aug 30, 2009

zappanut
  • 959 Answers

SOURCE: I'am replacing water pump 2006

You may have to remove the pump...
BUT , maybe not...
The pump pully has holes in it... with the power steering belt loose or off ... turn the pully to see if the holes will allign with the bolt you are trying to remove... if not... then the power steering pump must be removed to gain access to the last bolt..

Posted on Sep 26, 2010

  • 1757 Answers

SOURCE: GM 3.8 liter supercharge v6 firing order 2000

For the 2000 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.8L (including Super Charger) V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
'...1....3....5...'
____________
'...2....4....6...'
.......(front)
Ignition Coil Connections:
.'.5..2.'..'.3..6.'..'.4..1.'


For the 3.8L V6 including the Super Charger:
Firing Order:
1-6-5-4-3-2
Cylinders:
.....(back).......
'...2....4....6...'
____________
'...1....3....5...'
......(front)
Ignition Coil Connections:
(back)
o 6
o ---3
___
o 2
o ---5
___
o 4
o ---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the power steering pump pulley off 2002 pontiac grand prix gt


can rent or buy a power steering pully puller from the parts store it has instructions on how to use and then remove it is also used to install the pully

May 19, 2012 | 2000 Pontiac Grand Prix

1 Answer

Trying to change my water pump for a 2006 pontiac grand prix gxp but can not find where my tension pulley is located


I normally don't pass the buck, but go to e-how.com and depending on whether your

car is supercharged or not they tell you step by step how to remove your belts ,and

where the tensioner is located. there isn't enough space on this page to give you directions.

good luck!

Jul 14, 2011 | 2006 Pontiac Grand Prix

1 Answer

2004 pontiac grand prix supercharger make a whining noise power streering is full


Hello
All superchargers get pretty noisy make sure that the supercharger is full small allen head inspection plug next to the supercharger pully, the next thing to do would be to remove the supercharger belt and start it and see if the whinning goes away if it does then it is the supercharger making the noise. I wouldn't rule out any of the other pulleys making the noise remove the other belt and make sure that all of the other pulleys spin freely and make no noise when you spin them by hand.
Good luck
Chris

Mar 22, 2011 | 2004 Pontiac Grand Prix

1 Answer

How to put a serpentine belt on a 2006 pontiac grand prix gt


there is a tensioner pully that puts (tension) on the belt should have a 3/4 bolt when you apply pressure the belt will loosen just slip it off then the same to put it on

Feb 06, 2011 | 2006 Pontiac Grand Prix

1 Answer

How do I loosen the idler wheel in order to change the drive belt on a 2002 Pontiac Grand Prix V6 3800.


just use the size wrench that fits on the pully to relieve tension on the belt and remove belt while takeing the tension off repeat to put new on that way you dont have to remove anything

Nov 24, 2010 | 2002 Pontiac Grand Prix

1 Answer

Need a diagram to show how a belt is put on


here is a very nice belt diagram for your car
http://www.fixya.com/cars/t2859137-need_diagram_routing_serpentine

you can remove the old belt/replace by using a 15mm box wrench on the tensioner pully bolt.. that will pivot the tensioner to release tension. then the belt comes off easily .. do the same to install

Jul 05, 2010 | 2006 Pontiac Grand Prix

1 Answer

I cant seem to find the bolt used to relieve some tension for my belt in my 2001 grand prix gt. could u please tell me where it is located?


This uses a self adjusting tensioner.This vehicle should have a series II 3.8L.The adjuster is located just under the alternator and slightly to the right.If trying to remove the belt a 15mm headed bolt runs through the tensioner pully turning it counter clockwise should loosen the belt tension.

May 19, 2010 | 2001 Pontiac Grand Prix

1 Answer

Water pump replacement for 2006 grand prix gt supercharged v6


first take the 4 bolts that hold the water pump pulley out, do this while the belt still on, it's easier because the pulley won't turn on you.
remove the pulley then take the 8 bolts around the water pump then pry the pump out.

Feb 26, 2010 | 2006 Pontiac Grand Prix

1 Answer

My 1997 pontiac grad prix serpentine belt tensioner pulley went out how do i replace this?


First remove the belt then the bolt in the center of the tensioner needs to come out.Put the tensioner in a vise and remove the bolt from the pulley,pully will lift right off,reverse everything to install.

Nov 10, 2009 | 1997 Pontiac Grand Prix

Not finding what you are looking for?
2006 Pontiac Grand Prix Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...