Question about 2001 Audi A6

3 Answers

No power from fuse to feul pump - 2001 Audi A6

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 533 Answers

99 to 2003 A6 quattro will not pump fuel if crankshaft position sensor is disconnected or defective.

Posted on Apr 30, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Audi Master
  • 2,899 Answers

From fuse to fuel pump is a relay. The relay could be bad.
Hope this helps.

Posted on Apr 26, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audi Master
  • 3,519 Answers

Hi William:
First confirm that the fuse is good.
Then confirm (use voltmeter) that there is power at that fuse.
Then use the meter to check for power at the fuel pump.
Odds are that you either have a broken wire or a bad connection, possibly where the wire connects to the fuel pump.
Confirm that the ircuit is grounded.
Hope this helps

Posted on Apr 26, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The feul pump is not working,there is no feul in commin rail,the pump is not pumping feul,what can it be?


Hi,if you have already found out that the pump is not working,
you need to find the pump which most of the time its under the car near the fuel tank,you need to check the wires that go to it and find out if there is any power to it,if not check the fuse if ok,get a 12volt battery and cnnect to pump it self if ok,then problem in the wireing some where,but if one of the above is not working replace.
but if fuse is blown still check pump as it could be a falty pump that made fuse blow.
hope this was some help.

Apr 18, 2015 | Citroen C5 Cars & Trucks

1 Answer

Ingnitionfuse and relay checked its ok.fuelis not coming to injectors during crank .pls give a proper solution


the feul filter get a book and look were its located but it wouldnt be the ignition fuse it would be feul pump fuse when u turn the key in on position not starting the car youll hear the feul pump at the back of car kick on if u dont hear it replace the feul pump if it dose then its ur coils

May 17, 2013 | Cars & Trucks

2 Answers

Feul pump


Sounds like vapor lock. Leave the cap from the gas lid undone for a little while.

May 05, 2013 | Cars & Trucks

1 Answer

Where is the feul pump relay located on 1992 s10?


Here's where it's at. here's what it look's like.

Feb 17, 2013 | Cars & Trucks

1 Answer

Feul pump does not come on when key is turned on onmy 1994 dodge b250 van with 3.9 l v-6


The fuel pump relay gets power from a 30amp fuse that also powers the ASD relay. I think the fuse is marked with the letter D.
You may have to check the 30amp fuses to see if any are blown.
You can also jumper the pump relay.

Jan 18, 2013 | Dodge Shadow Cars & Trucks

1 Answer

Cranks but wont start


Someone will need to check the circuit at the pump to see if it is getting power from the relay. If it is the pump should be running when you first turn the key on.
You can also check for power at the pump relay.

Dec 13, 2012 | 2000 Ford Windstar

1 Answer

The gas pump burn,replace with a new pump,and not getting any electricity coming to the feul pump.all feul pump is ok.


Check this 3 items in this order efi fuse, efi, relay, circuit open relay.all of them in the engine compartment's fuse box.

Dec 23, 2010 | Toyota Corolla Cars & Trucks

1 Answer

No power in fuse box for fuel pump


If there is no power to the fuse block then there has to be a main relay check that to see if it is blown. it is usualy located in the fuse block undr the hood.

Jul 28, 2009 | 1997 Cadillac Catera

Not finding what you are looking for?
2001 Audi A6 Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...