On 2008 gmc arcadia my front wipers quit working at all. Any suggestions? Where is fuse for front wipers?
WPR/WSW fuse 25amp is located in the under hood fuse box . This a complex system ,controlled by the BCM . If you find that the fuse is good i suggest you take it to a qualified repair shop . This wiper / washer system has the capability to set DTC'S - diagnostic trouble codes !
DTC B3715 02: Front Wiper Relay Drive Circuit Short to Ground
The Body Control Module (BCM) monitors the control circuit of the WIPER relay. The voltage level should be low while the WIPER relay is de-energized and near system voltage when the relay is energized. After the BCM receives a low, intermittent, or mist signal from the wiper/washer switch, it responds by applying battery voltage through the WIPER relay control circuit to the coil side of the relay, energizing the WIPER relay.
DTC B3873 00: Front Washer Relay Circuit
DTC B3875 00: Wiper High Speed Relay Circuit
DTC B3922 00: Front Wiper Function Select Circuit
I really don't think this is a fuse problem , but if it is a blown fuse they don't just blow for no reason . Low resistance high current flow ,short to ground .
The wiper / washer switch is a input to the BCM - body control module . Depending on switch position the BCM will energize a relay the WPR relay or the WPR HI relay .
Jun 25, 2017 |
GMC Cars & Trucks