Question about Cars & Trucks

3 Answers

Vehicle needed a jump and cables were connected incorrectly. Radio , radio display lights and speakers aren't working. Where is the fuse located for this

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Radio fuses are usually under the hood. The radio also has a fuse on the backside of it.

Posted on Apr 26, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 456 Answers

You would of blown the main fuse ...follow the leads from battery and you'll come across a fuse on the lead ( mabe in a little black box ) that fuse will of blown ..if they lead to a main fuse box it will be the biggest fuse in that box

Posted on Apr 26, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Cars & Trucks Master
  • 1,745 Answers

Inside the radio, if that's not fried up at all.

Posted on Apr 26, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2000 Jetta Radio is dead after a dead battery jump start

Some German cars have anti-theft device inside to make it useless to steal...check at the dealership to see if jumping the battery will activate this(the car thinks its being stolen) .

Posted on Apr 29, 2009

  • 111 Answers

SOURCE: radio not working after jump strart

You need a code to enable your radio. Happens every time the battery is dead or disconnected. Contact a Saturn rep.

Posted on May 21, 2009

litoshop
  • 298 Answers

SOURCE: i need to locate the 2004 saab 9-3 the radio fuse

Hi I'm litoshop in the fuse block on the left hand side of the driver seat behind panel fuse #3 on the first row that has 9 fuses and on the next row fuse # 14 it will be the 5th fuse good luck if this information has been useful please let us know thank you

Posted on Sep 15, 2009

  • 170 Answers

SOURCE: what fuse controls the radio display lights for a

RADIO IS BAD

Posted on Jun 28, 2010

noranda21
  • 1547 Answers

SOURCE: i have a 2007 kia rio i accidently reversed the

is it only the radio that dosent work there may be another fuse on the wire of the radio

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What fuse is the radio light fuse


What make , module an year vehicle ! Probably the display part is bad , need new radio or have yours fixed . Most usually only one power fuse .

Sep 13, 2016 | Cars & Trucks

Tip

Jump starting a Buick Lacrosse 2005


Jump starting
If your vehicles battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle.
1.Check the other vehicle. it must have a 12-volt battery with a negative ground system.
2.Get the vehicles close enough so the jumper cables can reach, but be sure the vehicles are not touching each other. If they are, it could cause a ground connection you do not want. You would not be able to start your vehicle, and the bad grounding could damage the electrical systems.
3.Turn off the ignition on both vehicles. Unplug unnecessary accesories pluged into the cigarrete lighter or the accessory power outlets. Turn off the radio and lamps that are not needed. This will avoid sparks and save both batteries. And it could save the radio.
4.Open the hood on the other vehicle and locate positive (+) and the negative (-) terminal locations on that vehicle. You will not use yours vehicles battery for jump starting. It has a remote positive (+) jump starting terminal, located on the underhood fuse block, for that purpose.

on Oct 08, 2010 | Buick LaCrosse Cars & Trucks

2 Answers

After having had to jump start the battery, the camera and radio don't work. How do you reset it or check to see if something got disconnected when jumped.?


Normally jump starting doesn't involve disconnecting anything. You put the leads from a good battery onto the terminals of the bad battery and start the vehicle. I hope you didn't put the good battery on, start the vehicle and remove the battery with the engine still running and connect the old one? That is a recipe to cause electrical damage as the charge from the alternator has nowhere to dissipate its excess amps.

Check your fuses.

May 27, 2016 | Cars & Trucks

2 Answers

My 1990 mercury grand marquis was boosted wrong


Might need to check the main circuits for a blown fuse or fuseable link.
There is a fuse wire between the alternator and battery.

Dec 06, 2012 | 1990 Mercury Grand Marquis

1 Answer

On 2001 Crown Vic, radio lights are on, channels change,etc but no audio. Fuse issue or any other possibilities?


sounds like your speakers aren't connected properly. check your speaker leads coming from your radio and make sure they are positive to positive and negative to negative. if you're using an external amplifier,check your RCA cables and your speaker outputs on the amp. make sure thr remote turn on lead is connected, otherwise the amp won't even power on.
hope that helped, good luck

May 31, 2012 | 2001 Ford Crown Victoria

3 Answers

Color codes do not match my new radio can not get any power to the radio


Do these colors match your truck wire colors? Let me know if not or if you have more questions.

1991 Ford Ranger Pickup Truck Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Green/Yellow
Car Radio Accessory Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Blue/Red
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Orange/Green
Left Front Speaker Negative Wire (-): Black/White
Right Front Speaker Positive Wire (+): White/Green
Right Front Speaker Negative Wire (-): Black/White
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Pink/Green
Left Rear Speaker Negative Wire (-): Pink/Blue
Right Rear Speaker Positive Wire (+): Pink/Blue
Right Rear Speaker Negative Wire (-): Green/Orange

Oct 16, 2010 | 1991 Ford Ranger Supercab

1 Answer

The radio, windows and headlights aren't working.


If my memory serves me, this vehicle has a Body Control Module fitted which takes care of these and many more functions. By connecting the jumper cables incorrectly, this module may have been damaged and will need to be checked and or repaired by qualified persons. The radio may also have been damaged by incorrect jumper cable connection . To be honest, incorrect cable connections can destroy most electronic devices in the blink of an eye and can be very expensive to replace damaged parts. My advice would be to take the vehicle to a qualified auto electrician and have all the vehicles systems checked including ABS brake systems, Airbag systems etc.

May 21, 2010 | 2005 Hyundai Accent

1 Answer

My clock and radio are suddenly not working in my 2003 grand am


Your Vehicle has two fuse boxes one fuse box under the hood and one inside the vehicle. Check your owner’s manual and you should find the fuse panel at the side of driver’s dash console. Look at the fuse schematics for the fuse description radio then remove that fuse for a visual inspection. If it is good it could be an internal radio problem. However, If the battery jumper cables were hooked up incorrectly it may have damaged a battery cell or the regulator of the alternator and I would have her take it to NAPA, O’Reilly, or Auto Zone to have a free battery and charging system test.

Apr 02, 2010 | 2003 Pontiac Grand Prix

1 Answer

New battery now radio, doesn't work


If you connected your battery incorrectly (positive to negative) then radios tuner probably burned out.On some models there is a little fuse before the radio unit which suppose to protect the instrument from such problems.If you are lucky then this fuse needs replacing,if not radio needs few new parts or replacement.

Jul 07, 2009 | 2008 Mazda Mx 5 Miata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...