Question about Cars & Trucks

2 Answers

When I put the key and in ON position I can hear a clicking noise in the dashboard it disappears after few seconds any thoughts would be appreciated to fix this problem by my self

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 881 Answers

AS number 1 above or it could be the relay for the ign as you diddent say what make.

Posted on Apr 26, 2015

Testimonial: "When I put the key and in ON position ( Mercedes c180 kompressor 2003, I can hear a clicking noise in the dashboard it disappears after few seconds. when I start the car and drive there is no clicking noise. Any thoughts would be appreciated to fix this problem by my self.Can some one post a you tube link on how to remove the dashboard Thanks"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 991 Answers

That is the stepper motors in your A/C resetting the vents to your settings.

Posted on Apr 26, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 nissan maxima squealing clicking noise behind the dash


while clicking is happening place your hand on the heater blower motor and you will feel it coming from there. change the blower fan.

Apr 07, 2017 | 1991 Nissan Maxima

1 Answer

Re program my key fobik for a 2011 grand Cherokee jeep


put program key in ignition turn ignition switch to on position engine off for 3 to 15 seconds.you should hear acoustic signal and immobilizer lamp will flash then turn off ignition switch.you need two program keys to do this procedure twice. with in sixty second insert non program key in the ignition switch turn to on position engine off for at least with ten minutes you should hear acoustic noise immobilizer lamp flashing turn off ignition switch if all failed the dealership have to use diagnostic equipment to reprogram ignition key or keys.

Oct 26, 2012 | 2011 Jeep Grand Cherokee

1 Answer

I just got another remote for my acura 2002 rl. How do I program the second remote?


I believe the common process for programming Acuras should work for you. The below is the process. Good luck

1-Gather all remotes for the vehicle on hand. You only need one remote to get into program mode but all remotes must be programmed during the same session. The car will "forget" previous remotes everytime it is reprogrammed. 2-Sit in the car with all doors/trunk tightly closed. 3-Turn the key to the ON position, marked by "II" on the ignition bezel so the dash lights come on. 4-Listen for a quiet click, and then within 5 seconds press the "Lock" button on the remote for 1 second. 5-Turn the key to the OFF position, marked by "I" on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted. 6-Repeat three more times (for a total of 4 times). 7-Upon the 4th turning of the key to "ON", press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off. 8-Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programmed. 9-Turn ignition completely off and remove the key. 10-Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will "pop".

May 26, 2011 | 2002 Acura 3.5RL

2 Answers

I need to reset the oil change light.how do I do This?


1. Engine off, turn ignition key to RUN - do not start engine - make sure dashboard indicator lights come on

2. Put foot top of accelerator

3. Completely depress and release the accelerator TO THE FLOOR, THREE TIMES in rapid succession, within FIVE SECONDS - press release, press release, press release. Then wait a few seconds and the CHANGE OIL light should usually flash, sometimes accompanied by a few short beeps. Once it flashes it should disappear, and it should be reset.

Dec 22, 2010 | 2003 Pontiac Grand Am

2 Answers

My Van Is not cranking We thought it was the battery but found out that the battery is good. the horn and radio and stuff works but it will not evev try to crank


Are you getting a clicking noise at all? If not, I'd try the starter soleniod. (this is usually the problem - you can take the starter to an advanced auto and they can check it for you to be sure).

Otherwise it's the ignition (where you put your keys in). Sometimes these stop sending the 'start' signal.

Jul 09, 2010 | 2000 Chevrolet Venture

1 Answer

2003 BMW 325i - Car won't start. It will crank the (rrr rrr rrr)


Get a DTC scanner and see what it says...in the meantime, check that fuel pump relay and fuel pump. The humming sound is probably the heater blower motor or part of the HVAC system winding down after disconnecting from power.

Dec 16, 2009 | 2003 BMW 3 Series

1 Answer

GS 300 vibration or clicking noise behind instrument panel!!!


I would check the door lock relay first, beings you have issues with door locks.may or may not be related.

May 26, 2009 | 2001 Lexus Gs 300

3 Answers

Clicking noise when starting 99 Toyota Tacoma lights work, dashboard lit Any thoughts?


solenoids are worn out, it will probably eventually start after 4 or 5 clicks but its annoying as hell

Jul 26, 2008 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...