Question about Mercury Milan

2 Answers

What causes a 2012 Mercury Milan not to start light comes on when turn key but makes no sound

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 5,581 Answers

There is a lockout that keeps the starter from turning the engine over unless your foot is on the brake. When a foot bumps the switch which is usually on the upper brake pedal level, the switch can either break or move where it will not work.

Often you will notice the brake lights do not work, but there are some that will break and short out in different ways.

Posted on Apr 26, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercury Master
  • 47,720 Answers

Battery or starter or a security problem if it has a security system which most that age do anymore

Posted on Apr 26, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 63 Answers

SOURCE: 2007 mercury milan V6 Car wont start. Jumped it

Remove the lugs at the battery. Clean the posts and the lugs - then reconnect. Your battery won't charge (and the jumpers won't work) largely because of a film on the + post and lug. If you live in a hot summer area, (Arizona) the problem is especially troublesome.

Posted on Jul 15, 2009

  • 1 Answer

SOURCE: Upgrading 2006 Mercury Milan's sound system with MP3 jack.

Even though your current radio has an AUX button the radio is not programmed to utilize it.
There is no 'easy' way to add the '07 Job 2 and later year model's factory Aux input.
You will need to buy an aftermarket solution. Something like this http://pac-audio.com/productDetails.aspx?ProductId=821&CategoryID=24

Posted on Jan 19, 2010

  • 2 Answers

SOURCE: 2007 mercury milan factory remote start?

I did the same thing twice, Yet i cannot figure out how it works. What gives?

Posted on Mar 02, 2011

  • 2 Answers

SOURCE: 2007 mercury milan factory remote start?

I did the same thing twice, But i can't get it to start again. What gives?

Posted on Mar 02, 2011

  • 60 Answers

SOURCE: 2006 Mercury Milan key stuck in ignition.

There's a TSB published by ford for this condition. It's caused by a binding shifter button.


adobe.gif Printable View (73 KB) TSB
07-14-7

  • KEY STUCK IN IGNITION / SHIFTER BINDING CONDITION
Publication Date: July 6, 2007
FORD: 2006-2007 Fusion LINCOLN: 2006 Zephyr MERCURY: 2006-2007 Milan
This article supersedes TSB 07-2-1 to update the Part List. ISSUE: Some 2006-2007 Fusion, Milan and 2006 Zephyr vehicles built before 9/4/2006 may exhibit a customer concern of the ignition key getting trapped or a shifter slider binding condition. Most of the key trapped conditions are caused due to a binding shifter button which does not allow the pawl to contact the park detect switch.
ACTION: Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE If the key will not release from the ignition cylinder lock follow the Key Trapped procedure. On vehicles with a hard-to-shift shift lever into park or slider bunching/binding then follow the Shifter Slider Binding procedure. Key Trapped:
  1. Actuate knob button 5-10 times, observe for binding or sticky condition.
  2. Replace knob assembly if the knob sticks following Workshop Manual (WSM), Section 307-05. NOTE: WHEN REPLACING THE SHIFT KNOB DO NOT REUSE THE SCREWS. REMOVE AND DISCARD THE SCREWS. INSTALL TWO NEW SCREWS AND TIGHTEN TO 18 LB-IN (2 N-m). DO NOT OVER TIGHTEN THE SCREWS OR DAMAGE MAY OCCUR.
Shifter Slider Binding:
  1. If shifter slider is bunched up or binding, replace bezel assembly following WSM, Section 307-05. NOTE: WHEN REPLACING THE BEZEL, CARE NEEDS TO BE TAKEN TO ENSURE THAT THE BRAKE SHIFT INTERLOCK OVERRIDE TAB IS PROPERLY ALIGNED INTO ITS GUIDE. REFER TO FIGURE 1.

    tb8706a.gif
    Figure 1 - Article 07-14-7

    NOTE: WHEN REINSTALLING THE SHIFT KNOB DO NOT REUSE THE SCREWS. REMOVE AND DISCARD THE SCREWS. INSTALL TWO NEW SCREWS AND TIGHTEN TO 18 LB-IN (2 N-m). DO NOT OVER TIGHTEN THE SCREWS OR DAMAGE MAY OCCUR. NOTE: IF OVERRIDE CAP IS DAMAGED DURING REPAIR, IT IS AVAILABLE SEPARATELY.

PART NUMBER PART NAME 6E5Z-7D443-B Bezel Asy-Black w/FNR5 Trans (Fusion-Milan) 6E5Z-7D443-C Bezel Asy-Black w/Aisin F21 Trans (Fusion-Milan) 6H6Z-7D443-A Bezel Asy-Satin Nickel (Zephyr) 6E5Z-7213-C Knob Asy-Black (Fusion-Milan) 6H6Z-7213-A Knob Asy-Charcoal (Zephyr) 6H6Z-7213-B Knob Asy-Charcoal-OD (Zephyr) 6E5Z-7A214-B Override Cap-Black (Fusion-Milan) 6H6Z-7A214-A Override Cap-Satin Nickel (Zephyr) W790088-S901 Screw (2 Req)
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME 071407A 2006-2007 Fusion, Milan And 2006 Zephyr: Replace Knob Assembly, Includes Time To Diagnose And Verify Repair (Do Not Use With 04536A, 04536B, 7213A) 0.3 Hr. 071407B 2006-2007 Fusion, Milan and 2006 Zephyr: Replace Bezel Assembly Includes Time To Diagnose And Verify Repair (Do Not Use With 04536A, 04536B, 7213A) 0.4 Hr.
DEALER CODING BASIC PART NO. CONDITION CODE 7213 69

NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition described affects your car or truck. Contact a Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.

Copyright © 2007 Ford Motor Company
2010&c18=non-tab%20view&c21=07-14-07&c35=tsb%2c07-14-07&s=1366x768&c=32&j=1.3&v=y&k=y&bw=778&bh=347&ct=lan&hp=n&[aqe]

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 Mercury Milan has the anti-theft light on.Bought a new key,did the 8 turns on the ignition to reprogram and still wouldn't work.


NOTE: A minimum of 2 PATS keys must be programmed into the instrument cluster before the vehicle will start.
NOTE: This procedure works only if 2 or more programmed ignition keys (they do not have to be integrated keyhead transmitter [IKT] keys) are present. If 2 programmed passive anti-theft system (PATS) keys are not available, refer to Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in this section.

Mar 02, 2016 | Mercury Cars & Trucks

2 Answers

Key stuck in ignition in park. Check charging system comes on. Dealership says it might be a fuse.


Key Stuck in Ford Fusion (2006 model) - YouTube

? 1:21
https://www.youtube.com/watch?v=3LVQttFOzGA
Jun 18, 2014 - Uploaded by Jessica East
#Ford #Fusion #Key #ignition #Stuck #FordFusion2006. ... i have a 2006 mercury milan and my key got stuck in there last night,... it to park with a little bit of force. will see what happens next time. good video, nice to know.

Key Stuck in Ignition While in Park

www.2carpros.com/.../2007-ford-fusion-key-stuck-ignition-while-park
Dec 16, 2012 - KEY STUCK IN IGNITION / SHIFTER BINDING CONDITION FORD:2006-2007 Fusion LINCOLN: 2006 Zephyr MERCURY: 2006-2007 Milan

Nov 06, 2015 | 2006 Mercury Milan

1 Answer

The lighted keypad on the door of a mercury milan how do you make the lights work


They should light up as soon as they are touched, if not they are burnt out, witch is very common...

Mar 04, 2015 | 2010 Mercury Milan

1 Answer

I have a 2006 mercury milan. My son came out of work to find the car won't start, there is only a clicking sound when he turns the key. The radio works and the battery is about 3 yrs. old. And the gea


First the battery is drained. This will cause the clicking sound and possibly the shifter not releasing, if the voltage is low enough. The pop noise, not really sure about. Could be a fuse that popped. But a bad fuse wouldn't cause the starter to click. It would turn the engine or you would have nothing.

Nov 13, 2014 | 2006 Mercury Milan

1 Answer

Mercury milan problems


I do not believe they have been failing,UNTIL you TEST them
& also take the failed ones apart, to examine the cause of
failure

You can drive from 17 to 87,some 70 years, & it would be
doubtful you would ever have a bad relay

You certainly can't come here or ask anywhere, for the answer

ALL Vehicle problems have to be FOUND (find a problem) first,
then the solution (the relays-- good or bad are NOT THE PROBLEM) common sense

What would cause a relay to fail ?

Yes-- the primary coil could fail (TEST FOR THAT)

The Power Contacts if burnt ,IF you had taken them apart ,would
point you in the direction to your SYSTEM TESTING

I think people come here expecting a guess to solve problems
& that maybe someone else had the same issue,doesn't work
that way.

When something does not work ,do you not have to find out why

WHY-- is NOT throwing parts at the unknown,not if you test
nothing, to even find a problem

Jul 27, 2014 | 2008 Mercury Milan Premier

1 Answer

Mercury milan pats system


The check charging light should be on if the engine is not running.
The most common cause is a bad chip in the key. Have you tried a spare key ?

Jan 27, 2014 | 2006 Mercury Milan V6

2 Answers

Car has brand new battery and won't even crank


Sounds like a poor connection somewhere,bad alternator(not charging the battery) or a simple relay

Jan 23, 2013 | 2008 Mercury Milan

2 Answers

2006 Mercury Milan, I took our for a drive the other day. When I got home, the key wouldn't come out of the ignition. This is the second time this has happened in less than a year. I called the Service...


Mercury won't recall it because it's a low % of failures. You might have seen others with the same issue but the # of complaints vs # of sales dictates a recall. To help possibly solve the issue is to get "powdered graphite" like used in frozen door locks and give a couple of "spurts" in ignition switch. MAKE SURE IT'S POWDERED GRAPHITE and not liquid. You can get small tube at a parts store or any good locksmith.

Feb 19, 2011 | 2006 Mercury Milan

1 Answer

2007 mercury milan V6 Car wont start. Jumped it


Remove the lugs at the battery. Clean the posts and the lugs - then reconnect. Your battery won't charge (and the jumpers won't work) largely because of a film on the + post and lug. If you live in a hot summer area, (Arizona) the problem is especially troublesome.

Jul 15, 2009 | 2007 Mercury Milan V6 AWD Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

fordexpert

Level 3 Expert

5579 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...