Question about 2003 Chrysler Town and Country

1 Answer

How do you replace a stud on front wheel of a chrysler 2003 town and country

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 954 Answers

This seems to be a more common problem, occurring primarily because some lazy guy with an air drill does not properly "start" the lug nut by hand before he puts the air wrench on it and cross threads it.
We just replaced a couple and it is interesting because depending on the car, some have a place on the back where you can spin it and it will allow the broken lug nut to be pounded out of and a new one put in its place. (Be sure you attach washers and a nut and tighten down the new lug to pull in the back nice and snug before you consider the job done. Try watching this informative YouTube video: I hope this helps!

Posted on Apr 26, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How To Replace Install Front Wheel Bearing Hub 1996-2007 Chrysler Town And...

How To Replace Install Front Wheel Bearing Hub 1996-2007 Chrysler Town And Country

on Apr 10, 2012 | 2001 Chrysler Town & Country

1 Answer

How do you replace a wheel stud on the front of a 2003 chrysler town and country

In most cases the brake caliper and rotor will have to be removed. The affected stud can then be pounded out with a hammer. An air gun should be used to install the new stud using a spacer between the stud and hub assembly. Put the nut on the stud and using the air gun, pull it through un til it seats against the spacer and the hub

Apr 25, 2015 | Chrysler Cars & Trucks

1 Answer

How do you replace a broken stud on wheel for 2003 chrysler town and country

Remove the wheel..You should be able to punch the broken one out and replace it..they can be bought at any of the auto parts stores like auto zone. The new one has groves on the neck end that seats when you use the lug nut to tighten the wheel...good luck

Apr 25, 2015 | Chrysler Cars & Trucks

1 Answer

How to replace a rear wheel stud on a chrysler t&c touring w? disc brakes

you have to drive the old one out and hammer the new one in from the back side of the hub.

Apr 21, 2013 | 2006 Chrysler Town & Country

1 Answer

How to replace lug studs on 2002 chrysler town

I'll try to help you. If you are having trouble with 3 out of 5 studs on one wheel you may want to go to an autoparts store or Salvage yard to look at the whole hub. Usually a press is used to remove the bolts so you would be taking off the hub anyway. When you pay for 3 bolts and labor you may be better off in a Salvage yard or parts place for a different hub. The rear hub on front wheel drive cars is like a trailer axle. Much simpler to remove mounting bolts and press in new bolt. But if rear has differential(rear wheel drive) it has an axle shaft. Would be easier to grind and drill out broken stud on car. You can draw new bolt into place by placing bolt through a socket and use the wheel nut to draw the bolt into the hub.

Jul 08, 2009 | 2009 Chrysler Town and Country

2 Answers

How do you get the calipers off the rear?

Firstly you need to remove the park brake cables from the calipers. undo the bolts that hold the caliper to the hub assembly. lift the caliper away and yes you can buy new studs and nuts/bolts but you may need to go to a main chrysler agent to get them

May 12, 2009 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2003 Chrysler Town and Country Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides