Question about Suzuki Jimny

3 Answers

I have just pressed 4wl on my Suzuki jimny and it just flashed and would not allow me to select this option, why not?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

First off , this is a part time 4wd car, not AWD nor full time.
no year stated, so i guess. that..... see?
and if PT, 4wd , you most not drive on dry pavement, in 4wd.
only on ICE or off road, that is what part time means.....!!!
ask how to use PT 4wd first. driving the car in 4wd on dry pavement is a danger to you, others and winds up the drive line and damages
the transfer case (need photos of on wrecked from this act)?

Jimny 1970 to Present.
so/??? you think all those are the same. I dont.

here are the words for new Jimny (right off wiki)
Newer Jimnys feature electronic push-button selectable four-wheel drive, which requires the vehicle to be stopped with the clutch depressed and transmission in neutral to select low range.
it has vacuum front locking hubs. (only on newer years)

Posted on Apr 27, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 14,585 Answers

Switch, motor on the T case, or the module. since it does switch, I would look to electrical first. Switch, motor, and module. A scanner will tell.

Posted on Apr 25, 2015

  • 1 more comment 
  • Sarah knight Apr 25, 2015

    Don't understand what this means :-(

  • _-__-___-_
    _-__-___-_ Apr 28, 2015

    it assumes owner is driving on ice and it dont work. so says insert a scan tool and diagnose it. ir not on ice, then its Cockpit issues, Pilot error as the first post says, did you read the operators guide yet> tells you valid places to use part tiime 4WD

  • _-__-___-_
    _-__-___-_ Apr 28, 2015

    do tell what your tires are touch, (what part of mother earth) then post.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

4w wait detect switch not working or the actuator

Posted on Apr 25, 2015

  • Sarah knight Apr 25, 2015

    2wd and 4wd working just not the 4wl. This is a brand new car!

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75814 Answers

SOURCE: fuel pressure suzuki jimny

It should be about 45 PSI at idle.

Posted on Oct 02, 2012

  • 318 Answers

SOURCE: Easiest way to drain fuel tank on suzuki jimny

If it does not have a drain plug then you could disconnect fuel line and place in container and connect + to fuel pump at tank and neg to earth .Should pump out most of it.

Posted on Dec 10, 2012

nobody322
  • 20706 Answers

SOURCE: my Suzuki jimny stoped whiledriving

many suzuki have 2 baros, mine has 3.

one for altitude, inside ecu,

one for map TBI engine, (map sensor main 108 fails )

one for EGR map, to test EGR only. (my G16b has it)

we dont have 1.3 Jimny's here so can look it up for you.

but the FSM for your car (book) has this.

the P0108

is the main engine map sensor. (using usa fed rules for OBD2)

yours is EOBD rules. (im clueless with those)

that is used to calculate all air flow through the engine

it's output is stuck high,,

it's unplugged is my guess.

our map does 3.9V with the vacuum hose pulled. or just key on.



over 3.9v is illegal voltage and is bad map or unplugged.

when it goes to near 0v.volts at full vacuum 29"



this page may match your map for all voltages and states.



http://www.fixkick.com/sensors/my-map.html



that is my best idea here , lacking non USA books,

Posted on Apr 15, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Suzuki Jimny automatic 2007. It has 3 buttons to select gear type. None of these are now working.


Start by looking at the fuse box... check all the fuses. Next possibility is a relay.

The Suzuki Jimny Transmission Control Module (TCM) is an electronic circuit component that controls gear shift, TCC lock-up and idle-up according to the signal from each sensor. It is a microcomputer consisting of an IC, transistor, diode, etc. It is installed behind glove box.

1. Ignition switch
2. Transmission range sensor
3. Input shaft speed sensor
4. Output shaft speed sensor (A/T VSS)
5. Shield wire
6. Vehicle speed sensor (VSS)
7. Transmission fluid temperature sensor
8. Shift solenoid-A (Shift solenoid No.1)
9. Shift solenoid-B (Shift solenoid No.2)
10. Shift solenoid-C (Shift solenoid No.3)
11. Shift solenoid-D (Shift solenoid No.4) 12. TCC solenoid (Lock-up solenoid)
13. "O/D" cut switch
14. "O/D OFF" lamp
15. Monitor connector No.2
16. DLC
17. To ECM
18. To A/C
19. To brake lamp switch
20. To main relay
21. Terminal arrangement of TCM coupler

a4263c83-244a-438b-baaa-044b9bd1b782.jpg

Apr 18, 2017 | Suzuki Cars & Trucks

1 Answer

What is error code 33920-76JB2 on Suzuki Jimny


no year year, no joy
this is uSa forum not one JIMNY here, zero , nada, parts or books.
that is not an error code!
the ECU has 33920-76Jb2 part number on sticker side
33920 means ECU in Suzuki PARLANCE.
post a problem
and scan it

Mar 17, 2017 | Suzuki Cars & Trucks

1 Answer

Swivel ball assembly


welcome to USA forum
we dont have Jimnys here, not a one.
so cant wax too smart , if in EU? try a EU forum> on suzuki?
or Jimnys were called Samurai , long ago and for sure not sold here in 2006, not by a mile.
swival ball, you working CV's
Constant velocity Joints on the front left axle.
what are you doing. say the job first.

1: needs boots only (not hood but CV boots)
2: rebuilding one axle by self
3: fitting (R&R) a rebuilt new axle to car.

no books here on Jimny, not a one, here.
no online either here , for same reasons.

we have Vitara,s here, 89-2004 and ends.

here we are fitting those.
http://www.fixkick.com/axles/Pan-drop/pandrop.html


here is our relic Jimnys (ended in 1995/)_

http://www.fixkick.com/sammi-stuff/index.html

that is a real fsm and covers early jimnys... er, Sammi's

Jul 04, 2016 | 2006 Suzuki Jimny 1.3

1 Answer

Where is the baromic sensor fitted


the MAP, sensor, right? where is it?
why do you ask, curious? , someone stole it?
or got DTC errors that say, MAP dead. ?
why not just post the symtoms or buy the FSM and read it like above post. but above post is for USA cars, and there are no Jimny here, at all. and none on the above site for the same reasons
this is a USA forum not UK or European, it only covers USA cars.
why 2, why not tell country , engine controls run and work different on all countries (due to smog laws, etc)

the ignitor in most suzuki's moved to 2 places back in 1990s (late)
to the COP coil (DOHC engine) or to the ECU. itself.
my 96 still has a fire wall 4 port Ignitor J18 engine. but was moved in 97.

where is your jimny, (no address,) just a country,.
suzuki has like 56 engines and 95 markets. so.....
in your case we are 1 engine, and 95 markets.

why3, why ask for easter egg hunts? nobody here can answer.
post your VIN, then we can, (put xxxx at end for privacy)

Apr 17, 2015 | 2007 Suzuki Jimny 1.3

1 Answer

My Suzuki jimny stoped whiledriving


many suzuki have 2 baros, mine has 3.

one for altitude, inside ecu,

one for map TBI engine, (map sensor main 108 fails )

one for EGR map, to test EGR only. (my G16b has it)

we dont have 1.3 Jimny's here so can look it up for you.

but the FSM for your car (book) has this.

the P0108

is the main engine map sensor. (using usa fed rules for OBD2)

yours is EOBD rules. (im clueless with those)

that is used to calculate all air flow through the engine

it's output is stuck high,,

it's unplugged is my guess.

our map does 3.9V with the vacuum hose pulled. or just key on.



over 3.9v is illegal voltage and is bad map or unplugged.

when it goes to near 0v.volts at full vacuum 29"



this page may match your map for all voltages and states.



http://www.fixkick.com/sensors/my-map.html



that is my best idea here , lacking non USA books,

Apr 15, 2015 | 2007 Suzuki Jimny 1.3

2 Answers

I have a 56 plate jimny the fourwheel drive light is on on the dash is it stuck in fourwheel drive ?


Did you reverse more than 10 metres? Sounds like the hubs are locked into 4wd.this will work if you have auto hubs.but sometimes you have to turn the hub manually if they don't disengage.if you have gone some time or distance in 4wd

Dec 08, 2014 | 2006 Suzuki Jimny 1.5

2 Answers

Suzuki jimny 2004 model shuddering or death wobble


After searching on the net we saw a blog that said in rrsponse to having the rattle to ring the suzuki customer service hot line so we did. Found out that our jimny had a VIN number that was part of a recall that is still current. We booked in to get the rattle fixed at no cost they said for 12 Jan 2015. However today as we were driving along the steering column broke completely. We got the jimny towed to the same suzuki dealer and will be fixed free of cost next week. Moral of the story is ring Suzuki customer care and don't put it off!

Dec 19, 2012 | 2006 Suzuki Jimny 1.3

1 Answer

Fuel pressure suzuki jimny


It should be about 45 PSI at idle.

Oct 02, 2012 | 1999 Suzuki Esteem

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...