Question about Cars & Trucks

3 Answers

? Gas is getting in the engine oil and it has no power it started just all of a sudden didn't make it to work. ??

Gas is getting in the oil and i can't find out how its doing that?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Year make and model please. Injectors, carburetor, fuel pressure regulator, fuel pump. These cover old cars to most newer ones.

Posted on Apr 25, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It might be a stuck fuel injector, or loose ring on your piston or piston

Posted on Apr 25, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,218 Answers

Most likely a misfire problem and 1 or more cylinders are not working. Possible causes are.... Spark plug(s) ignition wire(s) ignition coil, valve timing, computer, wiring

Posted on Apr 25, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Okay I have a pull start generator I've used it for about 4 to 6 hours a day for the last 2 week now all the sudden it won't start it ran outta gas and I put more gas in it put oil in it and it wont start...


Hi Tina:
Here are a couple of ideas.
- When you put oil in it, was it really low on oil, and, how much did you add? Make sure that the oil level is where it's supposed to be on the dipstick. Too much oil is not good.
- When you run out of gas, sometimes you need to prime the engine to get it to start (after you've filled the gas tank). Do you know that gas is getting into the carbueretor?
- Do you know that you have spark? Pull the plug(s) and make sure they are in good condition and not wet with gas).
- Do you know that the fuel you got was clean?
Hope these ideas help.

Mar 28, 2015 | Cars & Trucks

1 Answer

I have a 2006 Dodge Stratus SXT 2.4L and my car was driving great and all of a sudden my car starts to stall and it wouldn't go over 20 mph and my check engine light starts blinking and my oil pressure...


read the codes in the computer to find out what codes are stored in the computer and then we can get more info to get it fixed email me at allactionmaintenance@gmail.com

May 20, 2013 | Cars & Trucks

1 Answer

97 mercury mountaineer. won't start


hi,

watch your oil pressure when cranking, you have to have some oil pressure to get the fuel system to start. you may have to find the hot wire at the relay and energize it to see if it is indeed the fuel pump going out. if its been sitting and its a 97 the fuel pump just might have went, you can also try hitting the gas tank from the outside in the middle to see if that works too. have a water hose or fire extinguisher around when your working on fuel system and leave one of your battery cable a little loose..

jm

Jul 04, 2017 | 1997 Mercury Mountaineer

1 Answer

No speed when gas pedal is to floor tranny light came on


With the oil light coming on and the brake pedal being hard to press I would say that the engine stopped hence no vacuum -no power assist from the booster.- hard brake pedal. The lock uo feeling may come from the engine seizing up while you were still in gear

Feb 02, 2013 | 2003 Jeep Liberty

2 Answers

2005 Chrysler PT Cruiser was running and after putting a couple of Gallons of Gas in the tank and continurd driving, all of a sudden the vehicle seemed to loose execleration power and would not start or...


I HAD SIMILAR PROBLEM MY 2005 PT SUDDENLY JUST SEEMED TO CHOKE DOWN AND PUSHING ON GAS PEDAL MADE IT WORSE SO I LET UP ON PEDAL AND THEN SLOWLYMPH ACCELERATER BUT I WOULD ONLY GO ABOUT 50 MPH AND THE ENGINE LIGHT CAME ON I CHECKED OIL IT WAS FINE I THEN PUT A CAN OF SEA FOAM IN GAS TANK AND DROVE SLOWLY A WAYS THEN SPEEDED UP IT RAN FINE SEEMED TO BE DIRTY INJECTORS OR FUEL PUMP. I WNT ON HOME THE ENGINE LIGHT STAYED ON THE NEXT MORNING THE ENGINE LIGHT WAS OFF AND IT HAS RUN FINE EVER SINCE

Oct 19, 2012 | 2005 Chrysler PT Cruiser

1 Answer

Engine light came on


Make sure your gas cap is tight, at least 5 clicks, sometimes a gas cap that doesn't seal tight will trigger the Check Engine Light. If the light stays on you will need to pull the Trouble Code from the ECM (Computer) using a OBD II scanner.

Jun 16, 2010 | 1999 Toyota Camry

2 Answers

Engine suddenly lost power on highway, would not start afterwards


check your oil dip stick if the oil is milky its your head gasket
defenetly sounds like that to me

Dec 28, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...