Question about 2004 Dodge Ram 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: error codes p0700 and p2706
Both codes (obviously) point to transmission
DTC P0700 - Transaxle Control System Fault Conditions
The P0700 code is for information only and the next step is to check for transaxle codes in the Transaxle Control Module (TCM). So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.
DTC P2706 - Shift Solenoid "F"
First check your wiring before you get inside and open the tranny up. Could be loose wiring, if not do the operation and make sure you do a heat test with the solenoid before you replace it.
Posted on Aug 02, 2010
Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.
Posted on Jan 08, 2009
replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.
Posted on Mar 08, 2009
P 0700 is basically a "generic" code signifying that the Transmission Control Module has detected a fault somewhere within the transmission's electrical system (typically a shift solenoid malfunction). If you see P 0700, take your car to some place that can plug a scan tool into it and retrieve the other codes which are causing your car to display the P 0700 code.
Posted on Sep 13, 2010
Tips for a great answer:
Nov 26, 2016 | 2004 Dodge Ram
Aug 05, 2016 | 2004 Dodge Ram 1500
Jul 29, 2013 | 2005 Dodge Durango SLT
Nov 01, 2011 | 2004 Dodge Durango
Oct 29, 2010 | Dodge Ram 1500 Cars & Trucks
Aug 02, 2010 | Dodge Durango Cars & Trucks
Jul 02, 2010 | 2005 Dodge Durango
183 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: