Question about 2013 Hyundai Elantra GLS

Open Question

2013 hyundai elantra etacs module location

Im looking for the etacs module location

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1665 Answers

SOURCE: thermostat in a 1997 hyundai elantra

See exploded view

1. Drain the coolant down to thermostat level or below. 2. Remove the coolant outlet fitting and gasket. 3. Remove the thermostat

Posted on Jun 23, 2008

  • 1 Answer

SOURCE: location of oil filter on a 2008 hyundai elantra

It is located under the alternator. If you are looking down at the engine, it is to the far left. If you are under the car it is to the far right before the oil pan.

Posted on Feb 09, 2009

  • 14 Answers

SOURCE: heater quit working 2001 Hyundai Elantra. Checked

If the heater is blowing cold air, it could be your thermostat. They cost $20-50 at an auto parts store. Also, after the car has been ran for awhile does it come up and stay at normal operating temperature? Is your coolant level normal? If the car is high in mileage and the cooling system has never beeen flushed, it may just need flushed.

Posted on Sep 16, 2009

SOURCE: Elantra's thermostat

dear friend:please look were the engine and gearbox joins together there is a housing were the radiator hose fits from the radiator,remove that housing and you will find the thermostat,

Posted on Sep 23, 2009

  • 7353 Answers

SOURCE: '07 Hyundai Elantra Oil Filter Location

Front of the engine, passengers side. If you have to ask, maybe you shouldnt be trying to do your own oil change.

Posted on May 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the fuse for a 2006 hyandi eltrana for back window defrost

images for hyundai elantra fuse box location

Interior Fuse Box Location: 2001-2006 Hyundai Elantra ...
The video above shows how to replace blown fuses in the interior fuse box of your 2005Hyundai Elantra in addition to the fuse panel diagram location. ... Some Hyundais have multiple interior fuse boxes including in the trunk - the video above will show you where the interior fuse box ...

2013 ' Hyundai ' Elantra ' Fuse Panel ' How to by ... - YouTube

Dec 01, 2015 | Cars & Trucks

1 Answer

My 2011 hyundai elantra won't turn over even though the electrical is working


? 3:03
Jul 16, 2012 - Uploaded by rdsinsandiego 2011 Hyundai Sonatas have been reported on the net by a few to have a random problem ... i have 2013 Hyundai sonata and the engine won't start when i use the key and turn on .... Had similar problem with my 2012 Elantra.

2013 Hyundai Elantra won't start - YouTube

? 0:24
Aug 29, 2013 - Uploaded by hellogoodbye1185
It will be fine for a couple of weeks then one day just won't start. ... my 2013 hyundai elantra also would not start but all the lights and radio were working .... Hyundai 2011 "PRESS BRAKE PEDAL TO START ENGINE" problem ...

2012 Hyundai Elantra Starting Issue - YouTube

? 0:57
Oct 10, 2012 - Uploaded by carupz421
So if your Elantra won't start, turn the key to where you can move the shift .... Having exact same problem on my 2011 elantradid you find out ...

Oct 29, 2015 | Hyundai Cars & Trucks

1 Answer

Air bag module location

Hi they are usually under the center console near park brake lever. Or forward from that under the dash look for a small metal box with yellow cables going in to it. Good Luck

Apr 26, 2015 | 2013 Hyundai Elantra

1 Answer

2013 elantra audio reset

To solve out the issue of resetting the audio of you 2013 Hyundai car, here I have attached the video for you which will explains how to reset the stereo head unit of your Hyundai Elantra, have a look

Apr 09, 2014 | 2011 Hyundai Elantra Limited

2 Answers


Dear fellow Elantranians,
I am an original owner of a 2002 Elantra (w/anti-theft module/ETACS), and have wrestled with the same problem for months: remote will unlock, but not lock doors.
The answer to the problem, at least in my case, was a door lock relay (Part #95250-2D000) located behind the center dash, to the right and below the radio and heater/AC controls (removal and replacement reasonably easy). A simple removal of one bolt and a wire connector, and the little devil is exorcised. It's been working without a hitch for more than two weeks, and expect it to continue for eleven years as the original relay did. I purchased this relay from a local salvage yard for $14.00, but a Hyundai dealership (, will sell it to you for $36.00.
Lucky Elantanian

Nov 28, 2012 | 2001 Hyundai Elantra

1 Answer

Tryin to locate the keyless entry reciever and the Set/Off button

The ETACS unit, which controls the alarm, is bolted to the dash chassis and is located immediately behind the climate control cluster. You need to gain access to this unit to code a new remote. Technically, you are not coding the remote; what you are doing is re-programming the ETACS module to remember and accept the secret code transmitted by the remote. The ETACS unit is designed to remember and accept up to two remote codes. If you wish to add a third remote, the dealer must program the third remote to utilize the same code from one of the other two remotes (called code-saving). There is no way to do this yourself.

The Project

1) Remove the dash facia using the "Easy Dashboard Removal" DYI posted
here by member kmr327.

2) Remove the four screws securing the climate control cluster, pull it forward, and remove the wiring harness.

3) Using a flashlight, (and cramming your head), find the sticker that marks the location of the set switch on the ETACS unit. It is on the right side of the ETACS unit, below the antenna input (the antenna can be unplugged -- it utilizes the same type connecter as the AM/FM antenna). Note the positions on the sticker for "Off" and "Set". By default, the switch is in the "Off" position, which is the normal functioning position. Next to the sticker is a small piece of tape covering the recessed slider switch, which you can not actually see. Remove the tape with a razor blade or by picking at it with your fingernail.

4) Once the tape is removed, use a jeweler's screwdriver or other similar small tool to flip the switch into the "Set" position. (Note: if you unplugged the antenna from the ETACS unit, the antenna must be plugged into the ETACS unit at this point and the car's battery must be connected). You are now ready to code the remote. NOTE: When you code the new remote, you must re-code your old one at the same time or the old one will no longer work. To code the remote, press either the lock OR the unlock button of the remote once. Do the same thing for the second remote. Try to do the second remote within two seconds of the first one. Slide the switch back to the "Off" position. Verify that both remotes function. If they do not, set the switch to the "Set" position again and repeat the procedure. If you continually run into problems, try coding only one remote. I have heard on some of the forums that the second remote has to be pressed within a second of the first and that it may take several attempts to be successful. I did not encounter this problem.

5) Reassemble the dash facia.

Hope this information is useful!

Apr 24, 2010 | 2001 Hyundai Elantra

1 Answer

Remote does not work even with new battery now the alarm goes off every time i unlock door and cannot start engine this is a 2003 hyundai i feel problem is with remote what can i do! regards Carole

The problem is electrical (ETACS Module/BCM). Contact your local Hyundai Dealership. Take your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Oct 22, 2009 | 2000 Hyundai Elantra

1 Answer

Hyundai sonata 2002 remote

There is a special (proprietary) programming electronics 'black box' for the keyless entry system on all Hyundai vehicles for programming the remotes. This programming is stored in either the BCM (body control module) or the ETACS module (Electronic Time and Control System).

May 22, 2009 | Hyundai Motor 2002 Sonata

Not finding what you are looking for?
2013 Hyundai Elantra GLS Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides