Question about Cars & Trucks

2 Answers

Needing plumbing blueprints for this trailer - Cars & Trucks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Good luck on that one. You would have to get with the manufacturer on this. Just run new ones. But keep in mind drain points. ( for winter time) Any thing U shaped will hold water and can burst when frozen. Put a drain valve in these spots . Or when winter comes on. Blow the system out with air pressure. Do it several times.

Posted on Apr 24, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,631 Answers

What make and model is "This trailer"? Reformulate your question. You can also do a google ssearch looking up the company which prodiced your trailer and find in website something like "Contatc" or "Client Service"

Posted on Apr 24, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having a problem with my 2012 Skyline 26SS travel trailer. Hot water coming out of both hot and cold facet. Hot water runs out fast in either valve.


sounds like previous owner did not do the plumbing correctly, 'no kidding' he says.
troubleshoot each line at the hot water tank and cold water tank. and look again for a bypass valve. ours is under the kitchen sink on the back of the hot water tank

Aug 01, 2017 | Cars & Trucks

1 Answer

Need to know the location of the shurflo water pump in my 2007 starwood lx 5th wheel trailer


hard question
cant find an internal design layout on that RV

will have wiring and plumbing pipes connected to it
check under removable seats on the sink side
side inspection panel if there is one

older pumps needed to be primed and sometimes lower than the water tank
or close where the water tanks are

6c12e577-f07f-4b52-ad8d-ecde48856935.jpg26291769-5imts0xhoi5pnrasl0adr515-2-2.jpg

Sep 26, 2016 | Cars & Trucks

1 Answer

Wherecan I get a copy of factory stripe blueprints


Have you tried national parts depot, or year one, or origional parts groupe, thats the best i can do for you unless you were from around my area, i know a guy that that does that kind of work.

Jul 07, 2009 | 1970 Oldsmobile 442

1 Answer

Brake controller not communicating w/ 7 pin connector


what type controller did you install? Is this a camper or trailer? Is the controller hydraulic plumbed into master cylyder? Important to know how to adjust rheostat for sensitivity. If set at minimum the system is basically on the edge of not sending any signal to towed unit. The intructions should explain how to make this adjustment. If set too sensitive trailer brakes will lock up before the tow vehcle starts to brake. Controller should be set so trailer starts braking just befor the tow vehcle. If not the trailer will tax the tow vehicle brakes by pushing. Its set right when you feel the combination stretching out. trailer first then tow vehcle. Good luck and remember, if truck brakes first and too hard you risk a jacknife. All light voltages should be system voltage. Brake voltage is variable depending on setting on controller. Understand your breakaway brakes and how they work. breakaway breaks require an auxillary battery. Again, good luck and you know where to find me if I can be of anymore help.

Apr 13, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

I need a blueprint of my 1990 dodge dynasty


autozone.com will have all the diagrams for this car , but not actual blueprints . hope it helps .

Nov 26, 2008 | 1990 Dodge Dynasty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...