Question about 2005 Toyota Tundra

3 Answers

Why did my turn signals Quit and my flasher still work

V.i.n.5TBDT48125S483484

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,428 Answers

They bolth work off seperate relays /sending units .
As long as the bulbs work for the brake lights and running lights front with the head lights on .
I would say you need to replace the flasher unit witch is actully a relay but they may not call it that .Its about 10 bucks and plugs in pulls out no tools required .
Look in the oweners manual for locatoin or auto parts store tell them what you need then look at the computer screen .
You didn't mention what kind of vehicle you owen but its likely in the fuse box or a relay center under the dash board and should be easly exessible they burn out from time to time.

Posted on Apr 24, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,326 Answers

Bad switch

Posted on Apr 24, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 12,524 Answers

One electronic relay , Switch most likely ! check voltage from the switch to flasher !

Posted on Apr 30, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen


When the turn signals quit working pull up , down , front to back an back to front on the turn signal switch handle . Do they work when doing this ? Pontiac had bad switch . The power for the turn signals goes through the flasher / hazard module . Could be the switch or the module.
The HAZARD LPS fuse in the left hand instrument panel (LH IP) junction block supplies battery positive voltage to the flasher module, which is part of the hazard switch assembly. The TURN LPS fuse in the LH IP junction block supplies ignition positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.

Mar 12, 2016 | 2001 Pontiac Grand Am GT

1 Answer

Both of my turn signals quit working at the same time... all the fuses are fine and the flashers still work....


There might be a flasher for "Hazard lights" and one for turn signals. Probably same part, swap them and see if turn signals start working, and hazards quit working.

Feb 19, 2016 | 1996 Lincoln Town Car

2 Answers

Turn signals will not work correctly. Click a few times, & then quit working, lots of out of rhythm "clicking", & then stop working. Emergency flashers work with no problem


The turn signals and the emergency lights work on two separate flashers, it sounds like the signal flasher is weak and should be replaced.

Jun 04, 2011 | 2004 Lincoln Aviator

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

1 Answer

My signals and flasher quit working 2002, Jeep Grand Cherokee


in your vehicles owner manual, look up fuses, and flasher units or flasher relay. Fuses are normally located under the dash, but when both turn signals quit working it is usually the relay. The relay is located under the hood yours owners manual should show you the location.

Oct 27, 2009 | 2002 Jeep Grand Cherokee

1 Answer

My turn signals quit working on my 1979 c70


some of these trucks used a flasher for turn and a flasher for 4-way hazard so you may find 2 flashers in the dash, also dirt is a big problem around grain dust and whether in the column turn indicator stick or the ******** column ones a good cleaning will do wonders at times,granted the original in columns are hard to access to clean

Oct 22, 2009 | 1983 Chevrolet C3500

1 Answer

MY TURN SIGNAL QUIT WORKING IS THERE A FLASHER


My service manual states that the '02 T+C has a combination turn signal/hazard flasher/daytime running lights module which is located on the junction block, adjacent to and left of the steering column. To access it, you must remove the steering column lower cover and knee pad panel. There is also a fuse for turn signal/hazard flasher. If none of them work, check the fuse 1st.

Jul 18, 2009 | 2003 Chrysler Town & Country

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

1 Answer

Turn signal quit


your right flasher switch is damage that's why it cant locked when you toggled it. try to clean it and check if the lock is still there.

Apr 18, 2009 | 1992 Chevrolet Lumina

Not finding what you are looking for?
2005 Toyota Tundra Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...