Question about Toyota Cars & Trucks
Go to auto zone.com become a member its free then you can look up the manual to any car your welcome
Posted on May 12, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look directly behind the headlight box if there is a rubber sleave covering the plug take it off. Unplug the wires from the bulb, there may be a saftey clip you will have to pry up to get it off.after you get the plug off the bulb holder should twist counterclockwise then it will pull right off.When you change the bulb just remember to wipe your body oil off the bulb before attaching it back into the headlight box. Then plug it back in and your in business. The high beam has three wires and the low beam has two wires. The bulb will have to be the right one.
God Bless You Greg
Posted on Nov 25, 2008
This procedure is wayyyy to long to list on here. Your better off going to your local auto parts store and buying a repair manual for your car. It will have both detailed procedures for fixing both of your items. You can also goto the library and get the factory service manual for free. Good luck to you and thanks for using fixya!
Posted on Jan 08, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Rear Bumper: Service and Repair
Removal and Installation
1. Remove the LH and RH rear combination lamps.
2. Remove both the rear wheels and tires.
3. Remove the LH and RH splash shields.
4. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
5. Remove the rear energy absorbing foam.
6. Remove the rear bumper reinforcement.
7. Remove the rear bumper supports.
Installation is in the reverse order of removal.
Posted on Nov 12, 2009
Tips for a great answer:
Jan 27, 2016 | Toyota Cars & Trucks
Jan 21, 2016 | Cars & Trucks
Feb 13, 2014 | 2006 Toyota Previa 2.4
Jan 03, 2014 | Toyota Cars & Trucks
May 07, 2011 | Toyota Highlander Cars & Trucks
Feb 15, 2011 | 2007 Ford Econoline
Jun 24, 2009 | 2007 Toyota Camry
71 people viewed this question
Usually answered in minutes!