Question about 2005 Toyota Tundra Limited

1 Answer

What part dose it take to fix the problem with my turn signals front a back do not ?

Nothing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 4,977 Answers

Try turning on the hazards, if they work then it is probably the signal flasher gone bad. these are 2 different flashers they look the same. you didn`t say what car/year you have so I can`t tell you were it would be located. if the hazards don`t work check fuse if this is good then it could be the turn signal switch that is bad.

Posted on Apr 24, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Nissan D21 , left turn signal dose not work , changed bulb and relay , still dose nor work. What next?


Next is probably the turn signal switch. If you have a voltmeter, however, you could be more likely to find the problem, using it to test for voltage at places in the circuit. So I guess you might also need a wiring diagram along with the voltmeter...

If you have neither a voltmeter or a wiring diagram, use logic to think the right turn works so the fuse is good, and if the right turn works, power is going to the switch, and out correctly for the right side, but seems nothing for the left, ( DID YOU CHECK NOT EVEN A BULB DIMLY LIT ON THE LEFT SIDE, FRONT OR BACK? AND ALSO THE LEFT TURN DASH INDICATOR IS NOT LIT?) If nothing lights up for left side, the power is probably lost right in the 25 year old turn switch. That's where you would check for power out (on the proper wires) with a voltmeter- no power means switch is bad. But if the power comes out of the turn switch for left side, then you have to look further along in the wiring , probably not far from the switch connector if the dash indicator bulb is also not lit....It probably is your turn switch.

Nov 25, 2016 | Nissan Cars & Trucks

1 Answer

My 1999 Ford F250's left rear turn signal won't work. New bulb, socket and wiring harness still doesn't fix it. I get a fast flashing of the left front turn signal and nothing in the back. The park


Does the bulb work for the brake switch ?
My guess would be a break in the wire between the switch and the socket, or a problem inside the turn signal switch.

Sep 06, 2014 | 1999 Ford F250 Regular Cab

1 Answer

Left rear turn light dose not blink when clicked


remove rear left lens and install new turn signal bulb.

Feb 02, 2013 | 1998 Ford Explorer

1 Answer

Turn signals dose not work in a2000 montecarlo


turn the hazards on and off see if ur hazards most cars theyre the same as the turn signals and most gm cars the turn signals are routed through hazard switch.. if still nothing located the flasher should in one of the fuseboxz at the end of the dash

Sep 21, 2011 | 2000 Chevrolet Monte Carlo

1 Answer

My right hand turn signal dose not flash


that is a classic symptom of a bad flasher.

Jul 20, 2010 | 1989 Pontiac Bonneville

1 Answer

1993 Dodge Dakota tail lights dead


dose it have a trailer package? If so check the plugs that go to the trailer plug that was the problem for my truck to goog luck.

Dec 20, 2008 | 1995 Dodge Dakota

2 Answers

Turn signals dont work 97 Geo Metro


There is probably something shorting the front turn signal wires; the car is supposed to turn the signal light circut on and leave it on if it detects a burned out light bulb. The flashers, however, are supposed to work normally no matter what happens.
Hope this helps!

Nov 10, 2008 | 1997 Geo Metro

1 Answer

TURN SIGNAL


sounds like a possible short in the wiring or a possible grounding problem.

Aug 30, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
2005 Toyota Tundra Limited Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...