Question about Cars & Trucks

1 Answer

How do i wire a switch to a two wire tilt motor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 10,875 Answers

Cut one wire and put a switch there

Posted on Apr 24, 2015

Testimonial: "Doesn't work. Two wires coming off the motor. Positive to one and negative to other direct will lift it and if you reverse the polarity it will lower it. Its like it needs some type of ground but there is only two wires and 3 wire positions on a 3 way switch. I can make it work using two switches but not a single switch. Am I missing some type of relays that I need?"

  •  johnny rebel
    johnny rebel Apr 24, 2015

    find a relay,but,i dont think that will work either

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

25hp1992 evenrude will not tilt up


if its the manual latch release to tilt up for transport either the lip, latch or release spring is broken --if electric trim check wiring ,switch,motor,or blown/frozen ram

Sep 04, 2016 | Cars & Trucks

1 Answer

2009 Acadia power seat tilt not working


If all other functions of the seat are working then you're more than likely either looking at a bad switch, wiring to it or the motor is bad, if the tilt uses the same motor as the up and down or back and forth, then it's probably the switch.

Jul 17, 2016 | 2009 GMC Acadia

1 Answer

On the 1995 tahoe the female plugin is three wires two orange and one black when pluged into the power seat plugin that is 4 wires to the seat swich the sear switch turns into a 6 wire to the 3 motors the...


The switch reverses polarity depending on which way you want the seat to move. The dark blue with tan wire and the tan wire are the two wires that control the seat forward and rearward motor. With the switch in the forwar position there should be power on the tan wire and ground on the dark blue with tan wire. With the switch in the rearward position it will be just the opposite. There will be power on the dark blue with tan wire N the tan wire will now be ground. This is the same for the other two motors. The rear tilt wil be the dark blue and dark green wires. The front tilt will be the yellow and light blue wire.

Sep 08, 2013 | Cars & Trucks

1 Answer

1995 Lincoln Continental, passenger seat won't tilt back forward


YOU HAVE A SWITCH OR A TILT ACTUATOR MOTOR PROBLEM. LINCOLNS HAVE 5 OR 6 ELECTRIC MOTORS MOUNTED ON THE UNDERSIDE OF EACH FRONT SEAT WHICH REQUIRES REMOVING THE SEAT TO INSPECT .THEIR ARE ALSO CABLES ATTATCHED TO THESE MOTORS SO LISTEN WHEN YOU HIT THE TILT SWITCH DO YOU HEAR A MOTOR NOISE? IF YOU DO THEN YOU MAY HAVE A BAD CABLE.

Apr 11, 2012 | 1995 Lincoln Continental

1 Answer

The tilting switch on my power seat switch does not work on my 2007 GMC Sierra Classic SLT. All of the other seat adjustments work except for the tilt.


It could be a faulty switch it won't be a blown fuse or wiring issue (its too protected). Most likely it is a faulty tilt motor in the underside of the seat frame. There are 3 seperate motors, and I have replaced all three at different times.

Jan 27, 2011 | 2007 GMC Sierra Classic

1 Answer

Sun roof will not close on 02 f150


Best to start by testing the motor.

Pull down the overhead console ( spring clips, and a screw to the front is how my 2001 was mounted, but it did not have the roof panel opening, could be all spring clips ), remove the power roof panel switch connector, and apply power to the leads to the motor.

The motor is the Blue & Violet wires from the roof opening panel module.

If this tests good, next is to test the switch.

The common wire to the switch is the Brown w/ Orange stripe wire, the Close tilt up is the Tan w/ Red stripe wire and the open / Tilt down is the White w/ Red stripe wire.

Sep 21, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Replacing ignition switch on 1976 Dodge D-300. Got the steering wheel off and taken out the circlip holding in the bearing. I''ve loosened the three screws that hold the turn signal housing, but can''t...


Here is what MOTOR says to do. If you have Tilt and/or Telescopic steering wheel the column needs to come off the dash and the mounting bracket removed so the cover on the wire harness can be removed. It is mounted with screws. On the others the wire cover is held on with clips and need to come off. The shift lever has to be full clockwise on all models except Tilt. On Tilt wheels position the gear shift at the midway point. Unplug the wire harness and remove the screw for the turn signal lever and then the lever. If you have cruise, let it hang. Remove the hazard warning switch and upper bearing retainer mounting screws. Pull the switch from the column carefully, guiding the wires through the column opening. Installation is the reverse.Hope this helps.

Oct 25, 2009 | Chrysler 300 Cars & Trucks

1 Answer

Electric seat will tilt back but cannot tilt back forwad


I DON'T THINK THEY HAVE MANUALLY DO THAT. YOU MAY CHANGE SWITCH TO OTHER WORKING SWITCH. THAN IT DOES NOT WORKING YOU MAY HAVE PROBLEM WITH MOTOR. I HAVE 1990 C4 SAME PROBLEM. BUT I CHANGED MOTOR IT WORK.

Jun 15, 2009 | 1990 Porsche 911 Carrera

2 Answers

Blower motor for heat and ac would only come on when I messed with the tilt wheel. Now it wont work at all.


Try the ignition switch, dodge has them on backorder so there is a problem that just has not got big enough to recall. The switch is only $14.30 unless you have a V10. Mine started off as the turnsignals quit working unless you moved the tilt steering and the the heater would only work in the tilt up position.

Sep 29, 2008 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...