Question about Mazda BT50

1 Answer

Why doesn't low beam turn on?

High beam, fog and blinkers are OK, checked all fuses ok, bulb ok but only low. I can't find any power on low beam socket and I checked my switch- works fine. When I test, how do I fix? I installed new h4 hid kit with all accessories that came with it. That's when I have this power issue and I get same problem when change to regular bulbs

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,324 Answers

Likely bad low beam relay.

Posted on Oct 18, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fixing dipped headlight issue on my 2004 audi


Check bulbs and fuse. If they are fine then check the switah. If OK it is wiring.

Dec 01, 2015 | 2004 Audi A4 Avant

1 Answer

Toyota Solara 2002: My high beams and fog lights do not work. Low beams, blinkers work fine.


Hi,just food for thought,when you switched the lights on did you check if there is aney power to the lights with ignition on,I thought that then atleast you would know that its not before the lights if there is power there.all the best,hope you get it sorted out.

Apr 27, 2015 | 2002 Toyota Camry Solara

1 Answer

Main beam lights not working


It's possible the "main" lights elements have burnt out.
I believe it's a single bulb per side with both high and low beam elements inside.
Try replacing a bulb and see what that does.

Mar 15, 2014 | 2007 Ford Fiesta 1.4

2 Answers

Fog lights wont work


Ryan, Does the fog light indicator on dash light up when you pull out the fog lamp switch? Also, Are you aware the fog lights won't work when high beam is on?

Mar 05, 2014 | 1999 Dodge Stratus

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

I have a 96 Cavalier and my passenger side low beam does not turn on (high beams OK) & my horn doesn't work either. I've replaced the bulb with no luck. Any suggestions?


The light socket itself could be bad. If you turn on the lights and put a meter on it you can verify there is power at the socket. If not you still have to trouble shoot some more. No power at socket could be wiring that went bad or melted but you will have to remove the socket and test the wires themselves. No power at the wire bare ends you have to go back to the fuse distribution and check that. Low voltage sucks for this very reason. good luck.

Nov 12, 2012 | 1996 Chevrolet Cavalier

1 Answer

I wired my fog lights for the power into the fuse box, but they stay on all the time when I turn on the car. I have them wired into my low beams, but I only want them to come on when I turn on my low...


OK, you need to connect a relay to one of the 'power' wires under the hood that leads to the bulb of the low beams. Then, the fog lights will go on only when they are turned on or off.

Otherwise, you could have a relay that is controlled by a switch that independently operates the relay and thus the fog lights.

Both methods are legal in, Pennsylvania, anyway.

Sometimes hooking up the relay to the fuse box will only turn the fog lights on if the ignition switch is turned on for switched fuse box contacts. And, sometimes, hooking the relay to the fuse box will keep the fog lights on all of the time, as the fuse box may be energized at all times at certain contacts.

Good luck on installing your fog lights, correctly.

Jan 08, 2011 | 1986 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...