Question about SsangYong Rexton

1 Answer

How do i strip a alternator

I need to fit new bearings to alternator

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • SsangYong Master
  • 880 Answers

Buy a rebuilt alternator, it will be cheaper in the long run

Posted on Apr 24, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 ford escort se how do I grease wheel bearings


Have you removed the hubs already?

You will need to clean bearings and hubs in Kero, dry and inspect for wear or damage.

Grease bearings with your hands by pushing grease into the large side of the bearing with your palm, grease needs to come out the other side of the bearing...

Repack hub, fit new seals, adjust preload, fit new locking devices(split pins).

Aug 06, 2016 | Ford Cars & Trucks

1 Answer

How do i change a serpentine belt on my 1990 new yorker


Write a diagram of the pulleys and belt direction release the tensioner or alternator adjusting bolt remove old belt and fit new one, check idler pulley bearings for noise and wear.

Nov 15, 2014 | 1990 Chrysler New Yorker

1 Answer

Why is my multi v belt still bouncing around after fitting a new belt and tensioner on my 2005 skoda superb diesel


Check all pulleys and idler pulleys sound like maybe a bearing gone that would make it noisy

Jul 15, 2013 | Cars & Trucks

1 Answer

Alternator stays on 13v for a couple of seconds then jumps to 14v,putting on lights and radio and heater causes no change.


thats correct it suposed to do that thats how it charges the battery if the ignition lights flicker make sure that the wire lomb in the back of alternator is pressed in correctley was it a new audi part or an after market one as i have had many problems with after market parts for my mercedes so if i can afford them i stick with them hope this helps ivan ps there is also a relay that sends current to the battery not sure where that is but it determans when to send voltage to battery to keep it charged

Sep 28, 2012 | 2005 Audi A4

1 Answer

Wirling noice back passenger side when driving


most likely cause is a wheel bearing ,if you remove the dust cover over the bearing and squirt some engine oil into it then refit it will quieten it down but eventually it will need a new bearing ,make sure its fitted the correct way around as the ABs reads off the grey painted magnetic strip which goes inwards

Mar 31, 2011 | 2000 Ford Focus

1 Answer

I have stripped a wheel lug and need to replace the front wheel hub. It stripped the grooves on the lug that fit into the hub.


Have you tried just installing a new wheel stud?

If you replace the hub you will also need to replace the wheel bearing since the bearing will be ruined when the hub is pressed out of it.

You will need to remove the knuckle from the vehicle and bring it to either a machine shop or auto shop to have the bearing and hub pressed in and out.

Nov 28, 2010 | 2004 Toyota Corolla

1 Answer

Left front hub replacement 2WD.


2WD pickups don't have hubs. They have rotors with bearings. Once you have the brake assembly supported, remove nut from spindle. Be sure not to strip the threads on the spindle. Remove the front set of bearings and pull the rotor off. Remove the rear set of bearings. Be sure to pack greases into new bearings prior to installation. Insert new rear bearing into rotor and replace onto spindle. Insert new front bearing and washer and re-install nut. Tighten to recommended torque specs, grease fittings and replace brake assembly.

May 15, 2010 | 2005 Chevrolet Colorado

1 Answer

Does anyone have a diagram for a 1978 caprice alternator belt?


I can't send you a diagram,but it's not too hard to explain. Loosen off the alternator first. Two bolts, one you can see that goes through a bracket on the engine and another that is directly under that bolt on the bottom of the alternator that goes into the engine. Fit your new belt over the fan first, one blade at a time and on the pulley. Run the belt down to the bottom crankchaft pulley and then across to the alternator. Before you tighten the belt make sure that all 3 pulleys are in a straight line when you look from the side. If not move them so they are. Take a long screwdriver and put it in the hole on top of the alternator bracket and pry the alternator over so the belt is snug and a little bit more. Tighten the top bolt first,but be careful because it can strip the threads. Then tighten the bottom bolt.You will probably have to retighten it after a few days because the belt will stretch. If the belt squeals when you start or rev the engine then it needs to be a little tighter. If you strip the top bolt, just take it out and find a smaller one with a nut and washers and use it with the washers on the front to keep the new bolt from pulling through the bracket. Hope this helps.

Jun 18, 2009 | 1978 Chevrolet Caprice

1 Answer

Leak from Drive shaft output seal


Does it leak from off the driveshaft?
If yes , thn check the diameter of the driveshaft where the seal lip touches.

May 22, 2009 | 1993 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top SsangYong Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

terry stevens

Level 3 Expert

991 Answers

Are you a SsangYong Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...