Question about Cars & Trucks
The best way is to call a knowledgeable mechanic from the closest repair shop.
Posted on Apr 24, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if the fuel pump is running check the fuse for the injectors if the fuse is good check the air filter to be sure it is not too restrictive if that is good check to see if the fuel filter is put on so that the arrow on the filter is towards the engine.you also might look at the spark plugs to see that they arent fouled out and they arc properly. check the coils to see if all of them get a spark. if the fuel pump is not running check fuse or that the pump is connected properly. if the pump isnt running the engine will just run off of the fuel already in the line until it is gone causing it to stall out
Posted on Jul 30, 2009
Because the fuse is missing and hard to find I would look to see if someone by-passed the fuse and that be the problem. It should be fused.
Posted on Aug 03, 2009
The spark is to weak change the crank sensor.If that does not solve the problem then its the coil pack that needs to be replaced
Posted on Dec 27, 2009
SOURCE: lost power to engine
Check make sure all plugs are firing. Sounds like what my 93 Rodeo was doing-Idled okay but very rough when in gear. Turns out only 5 out of 6 plugs were firing due to a defective ignition module- 100 bucks later it works fine.
Hope this helps.
Posted on Mar 20, 2010
Tips for a great answer:
Oct 19, 2016 | 2005 Ford Falcon 4.0
Dec 03, 2012 | Cars & Trucks
Nov 07, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Oct 10, 2009 | 1995 Ford Mustang
Aug 29, 2009 | 1988 Chevrolet C1500
Apr 20, 2009 | 1990 Ford Ranger SuperCab
Mar 25, 2009 | 1996 Chevrolet Cavalier
Mar 22, 2009 | 1992 Chevrolet K1500
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: