Question about 2006 Chrysler Sebring

1 Answer

Hello i want to grease the bushes on my 2006 Sebring to stop it from squeaking but I do no no where to look to find bushes . Wanted something to show how to do it and need to see what I am looking for

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Chrysler Expert
  • 252 Answers

Are you sure its the bushings making the noise? first off you dont grease the bushings. a lot of the squeaking i have seen comes from the ball joints. that generally means they need to be replaced. you need to make a real inspection of the front suspension. none of the parts that come on these cars have grease fittings. usually the upper strut bushings are the first to go. like i said, you need to make an inspection. you may have parts that are failing. this can be dangerous if one fails. there are bushings, 2 each, on both the upper and lower control arms. the lowers are where the arm attaches to the frame. the uppers are attached to the upper strut mount. generally you would replace the complete control arm assemblys

Posted on Apr 24, 2015

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

samtoler
  • 666 Answers

SOURCE: i have major squeaking under my truck while

Id say lack of grease in the balljoints is your issue. if the balljoints do not have grease sert? Get a needle kit at local parts store for about 10 bucks and buy a grease gun with some synthetic grease, Stick needle into the most outer edge and pump it full, You can use it in tour tie rods as well. This should resolve your issues

Posted on Jun 13, 2010

Terry Corrow
  • 10875 Answers

SOURCE: How to grease bushes 2006 Sebring when rain they do not squeak

get your car oil undercoated

Posted on Apr 23, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 hyandai sonata, does it have greese fittings


Often mysterious squeaks are from dry torsion bars bushings. There are two of them mounted to the engine "sub frame." My wife's Ford Focus has this issue as well. It squeaks when driving ove rthe curb onto the driveway. The solution is to unbolt the two hold-down clamps that secure the torsion bar to the subframe then apply soime silicone grease inside the rubber bushing so that the rubber will no longer "grab" when the torsion bar moves.

Mar 03, 2015 | 2006 Hyundai Sonata

1 Answer

2001 Buick LeSabre Ltd. 128,000 miles. All new front struts and rear air shocks and stabilizer links. Even before that I get a creak (sounds like rubber) from both front sides when I go 15 mph over sp


Sounds like it could possibly be the upper or lower control arm bushings squeaking. There may possibly be a grease fitting on the control arm bushings, if so, have them greased. In fact get a complete grease job from a qualified mechanic. If the squeak stops then you know what is wrong. Then make sure you keep your care properly greased. Usually every time you change your oil or at least twice yearly.

Oct 29, 2014 | 2001 Buick LeSabre Limited

3 Answers

Squeaking noise in front end of 2006 Dodge Dakota - both sides


Could be ball joints or lower control arm bushings.
You can try soaking the bushings with wd40 and see if the squeak goes away temporarily.

Jul 06, 2012 | 2006 Dodge Dakota

2 Answers

My 2006 Chrysler Sebring touring suspension recently started squeaking after my winter tires were installed.what could be the cause of this?


the tire might be rubbing on the strut assembly but i betting its just cold grease when it gets cold the grease gets thick and the rubber bushings in the suspension get stiff making squeaking noises i would take it to a oil changing place and have them grease the chassis that should help.

Dec 24, 2010 | Chrysler Sebring Cars & Trucks

2 Answers

Have a 05 sebring sedan. front end squeaks in the suspension when it gets warm. have replaced everything in the the last year. what else could it be.


Usually squeaks are rubber bushings that need liquid soap lubrication. The anti-roll bar bushings and end links are common sources. So is the lower arm bushings that work with the strut assembly. Suggest getting under the car while someone pushes down on the front end to get it squeaking. Good luck!

Aug 15, 2010 | 2000 Chrysler Sebring

1 Answer

I have major squeaking under my truck while driving, could it be that my sway bar bushings need to be greased to stop the squeaking


Id say lack of grease in the balljoints is your issue. if the balljoints do not have grease sert? Get a needle kit at local parts store for about 10 bucks and buy a grease gun with some synthetic grease, Stick needle into the most outer edge and pump it full, You can use it in tour tie rods as well. This should resolve your issues

Jun 13, 2010 | 2001 Dodge Dakota

1 Answer

2001 chrysler sebring ball joint (boot) repair


I do not believe that the balljoint is causing the squeak. Take your car to an independent mechanic that you trust. dealerships are notorius for mis-diagnosing (it begins with the intake person describing the problem wrong).

More than likely, the squeak is coming from a worn rubber bushing or mount. Check the exhast pipe hangers for worn rubber. Also check the anti-sway bar bushings and the motor mounts. You should be able to replace these with ordinary tools (assuming you have safe access to the botom of the car - i.e. jack stands). Also check the control arm bushings (these would require an expert, or a pro to replace).

If the balljoint boot is cracked, you can prolong the ball joint life by keeping it well greased. If grease is oozing out the crack, then the balljoint is protected. Replacing the balljoint boot requires separating the wheel spindle from the control arm and can be very dangerous because of the strut spring. This should be left to the expert, or professional mechanic. Also, if the ball joint is squeaking, it needs to be replaced.

If you still want to tackle this yourself, buy a Chilton or similar book (under $10) specifically for your car. They have good instructions and diagrams.

May 25, 2009 | 2001 Chrysler Sebring

4 Answers

LOUD CREAKING NOISE COMING FROM FRONT END


grease ball joints that should fix it

Mar 21, 2009 | 2002 Chrysler Sebring

4 Answers

2000 Chrysler Sebring Conv. replaced struts-front end squeaks on brake and turn


the reason why ur car squeaks is the ball joint i have a chrysler and same thing happened n my friend knows a lil bit bout cars had the same prob with hiss car and then the tire came of came to find out it was the ball joint causing the squeaks its not bearings or ur brakes car places told me same thing didnt fix it it is 100 percent ur ball joint and when u ask for the part ask for a lower control arm with a ball joint and install it by whoever

Nov 06, 2008 | 2000 Chrysler Sebring

Not finding what you are looking for?
2006 Chrysler Sebring Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...