Question about Chevrolet Astro

1 Answer

Im putting in a electric external fuel pump in a 85 astro van where do i plug the hot wire in at the fuse box

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 10,875 Answers

You are asking for problems and a fire

Posted on Apr 24, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my ECM-I fuse keeps blowing?


Did you check the crank sensor wire, it may be hitting the hot exhaust. does the wire going to fuel pump have a problem and is shorting out. ECM 1 ..... then there are 5 components that this fuse feeds
1-crank sensor
2- all injectors
3- ECM
4- electronic ignition control module
5- ignition coil - check for a bad wire in these areas. Hope this helps.

May 21, 2014 | 1997 Chevrolet Astro

1 Answer

I hit a bump and my 1998 astro van quit running and the gas gauge went way past full and now the fuel pump doesnt run


the ground fell off of the fuel pump or the plug came loose. its between the tank and frame. pull the wires down until u see the connector. unplug clean and plug in. I would check the fuse and relay first. usually there is another relay that is the same as the fuel pump in fuse box. switch them and see if it works

Mar 16, 2013 | 2000 Chevrolet Malibu

1 Answer

Is there anything else that controls the fuel on a 1999 chevy astro van


You removed the relay and put back in, and it can start? It could be a relay going bad or a wiring terminal connection where the relay plugs in. I would try a new relay and see if problem goes away. Clean the terminals with an electronic cleaner spray, where the relay plugs in.

Jan 06, 2013 | 1993 Chevrolet Astro

3 Answers

1989 astro van turns over will not start seems not getting fuil gas tank full


#1 NEED TO VERIFY SPARK AT SPARK PLUGS # 2 CK FUEL PRESSURE AT SCHRADER VALVE ON FUEL RAIL ,,PRESSURE DEPENDS ON TYPE ENGINE ....IF NO SPARK AT SPARK PLUGS CHECK SPARK FROM COIL WIRE , IF NO SPARK AT COIL ,CHECK VOLTAGE TO IGNITION COIL SHOULD BE 12 VOLTS, IF NO VOLTAGE AT COIL ( KEY ON ) CHECK FUSES THEN IGHITION SWITCH. IF NO FUEL PRESSURE AND FUEL PUMP RUNS REPLACE PUMP .. CK VOLTAGE TO FUEL PUMP WHILE CRANKING . CK USING PUMP GROUND WIRE AT THE PUMP CONNECTOR THIS WILL PROVE GROUND ALSO. USE TEST LIGHT TO VERIFY

Aug 07, 2010 | 1989 Chevrolet Astro Cargo

1 Answer

1994 astro ext will not start


fuel pump relay is under the hood in the fuse/relay box. information is in your owners manual.
when was the last time you replaced the fuel filter, maybe its plugged?

Nov 02, 2009 | 1994 Chevrolet Astro

2 Answers

1994 chevy astro van awd


underneth the intake manold is were your fuel injector poppet nozzles are, more than likely the fuel line hose that goes thru the back of the intake is split and leaking fuel underneth the intake manifold if you check the fuel pressure you will find that the fuel pressure will drop down to 0 psi as soon as the fuel pump shuts off and it should hold pressure

Oct 22, 2008 | 1994 Chevrolet Astro

1 Answer

Cranks but no start


There is no fuel reset button on this van.

To test the circuit before removing the tank, you will need a voltmeter or cheap test light. Disconnect the connector at the fuel tank. On the harness side, locate the gray wire (fuel pump wire). Connect the test light to a good ground. Have a helper crank the engine over. While engine is cranking, the gray wire should have power. If it does, and the pump is not turning on, then the pump must be bad and need replacing. If there is no power on the gray wire with engine cranking, the circuit is the problem, not the pump. Go back and find the fuel pump fuse in the junction block (the fuse relay block where the fuel pump relay is). Check the fuse, also check if there is power going to the fuse. This fuse should be hot at all times. The circuit goes from battery to pump fuse to fuel pump relay to gas tank and the fuel pump.

Aug 02, 2017 | 1995 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...