Question about 1999 Mercury Villager

1 Answer

1999 mercury villager front drivers side brake caliber locks up replaced caliper and rotor already

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 5,467 Answers

Could be collapsed rubber brake hose on drivers front brake. Inside of hose has collapsed like a flap gate and brake fluid can not return to master.

Posted on May 07, 2015

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: 1999 mercury villager brakes front drag and lock

It may be just a matter of cleaning and lubricating calipers and pins, but check that piston retracts while your doing that.

Posted on Jan 22, 2010

  • 114 Answers

SOURCE: I have a 2002 dodge

you have to bleed both front brakes & it should be fine

Posted on Oct 18, 2010

mastericpr08
  • 571 Answers

SOURCE: left front caliper sticks on 93 villager after

Maybe when you put back the calper screw it wrong.

Posted on Oct 21, 2010

  • 632 Answers

SOURCE: What is causing left front caliper to continually fail. Is it related to anti lock brake system?

The hose could be collapsed internally holding residual pressure and keping the pads applied. Also make sure that the caliper is sliding free side to side.

Posted on Jun 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 villager right front and left rear brake seizes after driving a couple of miles wont release until line is loosed


Did you by chance add power steering fluid to the brake reservoir instead of brake fluid?

Mar 01, 2015 | 1995 Mercury Villager

1 Answer

93 Mercury Villager brakes locking up


sounds like your brake caliber's are not realseing out all the way causeing your brakes to drag against your rotor's

Dec 27, 2012 | 1993 Mercury Villager

1 Answer

Brakes


usually when this happens its caused by the caliber being push beyond its normale operating range or contaminated brake fluid. you should change the brake caliper and flush the brake lines with brake cleaner then bleed the system with new brake fluid

Jun 04, 2012 | 1997 Mercury Villager

1 Answer

I have a driver side brake locked up on a 1997 mercury villager where is the porportioning valve located


I would replace both front rubber flex brake hoses

The driver side is most likely collapsed inside,if the
caliper is not rusted inside & the piston frozen

You may as well do the calipers as well

Not the proportioning valve if one side works

You can not have any rust on the caliper & pad sliding surfaces
& they have to have lube, such as anti-seize

You do not assemble brakes dry,ever & they have to come apart
at least once a year to start the rust removal process over & lube

Sep 19, 2011 | Mercury Villager Cars & Trucks

1 Answer

How do you get the capierer pin off to put front brake pads on my Mercury Sable LS?


Section 06-03: Brakes, Front Disc 1999 Taurus, Sable Workshop Manual REMOVAL AND INSTALLATION Brake Shoe and Lining Removal
  1. Remove brake master cylinder filler cap (2162). Check fluid level in brake master cylinder reservoir (2K478) . Remove brake fluid until brake master cylinder reservoir is half full. Discard removed fluid.
  1. Raise vehicle on hoist.
  1. Remove wheel and tire assembly from front disc brake rotor mounting face. Use care to avoid damage or interference with disc brake caliper (2B120) , front disc brake rotor shield (2K004) or front wheel knuckle (3K185) .
  1. Remove rear brake pin retainers (2N386).
  1. NOTE: It is not necessary to disconnect hydraulic connections.

    Lift disc brake caliper from front disc brake caliper anchor plate (2B292) and front disc brake rotor (1125) . Do not pry directly against metal caliper piston or damage will occur.
  1. NOTE: To prevent damage, do not allow disc brake caliper to hang by the front brake hose (2078) .

    Position disc brake caliper out of the way.
  1. Remove inner outer brake shoe and lining (2001) assembly from front disc brake caliper anchor plate .
  1. Inspect both rotor braking surfaces. Minor scoring or buildup of lining material does not require machining or replacement of front disc brake rotor.
-----------------------------------------------------------------
remove the 2 pins, #10 in pic. Usually has a dust cover over pin accessopening. Usually torx haed or hex head bolts (pins).


snorkelbobby_7.gif

Nov 12, 2010 | 1999 Mercury Sable

2 Answers

Left front caliper sticks on 93 villager after replacing caliper, rotor and brake hose


If the caliper is sticking it should have a warranty. Either installed incorrectly or it was bad out of the box. Remove and replace.

Oct 21, 2010 | 1993 Mercury Villager

3 Answers

Changing front disc brakes on 95 ford f250


Thats how I have done it on 2006 250. No C clamp.

Aug 03, 2010 | 1995 Ford F250

1 Answer

Front calibers keep locking up on my 96 dodge dakota 5.2


I would replace the rubber brake hoses at the calipers. They get damaged internally when the calipers are left hanging while replacing pads. I've seen too many garages and shops do it not knowing what is going on inside the hose.

May 06, 2009 | 1995 Dodge Dakota

Not finding what you are looking for?
1999 Mercury Villager Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...