Question about Peugeot 207

Open Question

How do i remove the rear brake drums of a peugoet 207 1.4 hdi 20008

How do i remove the brake drums of a peouget 207 1.4 hdi 2008

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: remove rear brake drums

0f2c8a8.gif
1. After removing the wheel, remove the brake drum. 2. Remove the shoe hold down spring, the automatic adjuster spring and adjuster lever.
7b7d17f.gif
3. Spread the shoes and remove the shoe adjuster. 4. Remove the shoe to shoe spring and shoe hold down spring.
a1a62c3.gif

Posted on Jun 03, 2008

280zlvr
  • 126 Answers

SOURCE: REAR BRAKES

i think your aware of how to change the brakes if im right and your problem is the rusted drum doesnt want to come off the only way to get the old drum off is to remove adjuster plug from behind drum dustshield and adjust the shoes so that there not even close to the braking area of the drum then try and wiggle the drum off of the assembly if it is not coming off then you need to use the old nylon hammer on the drum and i mean you must hit the drum from side to side trying by hand to wiggle the drum off its a tight fit and you need to strike the drum on the face not on the fins not wanting to damage with persistance and care and patience you will eventually be able to remove the drum to service brakes take care and good luck with it

Posted on Jul 01, 2008

  • 599 Answers

SOURCE: Seized rear brake drum on a 1997 Dodge Ram 1500

loosen emergency brake both sides..open wheel cylinder and let fluid run as you pry gently side to side in between drum adn shoe through backing plate /drum area to collapse the shoes some..... use wd40 or quality rust buster at center of drum /axle area to loosen grip of rust fused metal at hub to drum ..tap tap with hammmer around circumference of drum to dislodge adn loosen shoes from drum and drum from axle..good luck.. be patient work slowly

Posted on Nov 11, 2008

  • 73 Answers

SOURCE: remove the rear brake drum on 2004 Dodge Caraven

No just make sure your emergency cable is off and take a large hammer an hit it around the edge or corner lightly and spin at the same time also try pulling with your other hand as you spin this is a technique all mechanics use its very unlikely that you will have to loosen up the shoes with a brake spoon.REMEMBER THE OUTER ROUNDED EDGE ONLY WHERE ITS THE THICKIST.

Posted on Mar 23, 2009

foskorider
  • 79 Answers

SOURCE: Need to remove then repair rear drum brakes

jack up one side at a time without the ebrake on as that will engage only the rear brakes remove lugs and have a good hammer handy and tap on the drum until it will pull off

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My citroen c crosser asc light came on all of a sudden some problem coming from front brakes steam coming out from somewhere came to a sharp stop got out brakes where glowing red?


there is a problem in the brake system in that the brakes are dragging and staying on. could be a master cylinder fault, adjustment if drum brakes, seized callipers. Take it to an accredited brake shop and have it fixed.

Feb 09, 2015 | 2008 Citroen C-Crosser HDi

Tip

Peugeot 207 rear wheel brake cyclinder replacement


When replacing a Peugeot 207 rear wheel brake cylinder, the Workshop Manual recommends that once the drum has been removed, the brake pipe disconnected from the cyclinder, and the cylinder retaining bolt removed, the upper brake shoe return spring should be removed to allow the cyclinder to be withdrawn from its mounting position.

It is not neccessary to remove the upper brake shoe return spring (tricky to do and even more difficult to put back) - just raise the handbrake (emergency brake) lever a few clicks until the ends of the brake shoes are clear of the cylinder. The cylinder can then be manoeuvred over the upper return spring.

on Apr 13, 2014 | Cars & Trucks

1 Answer

How to change 2008 Dodge avenger brake Drums


When you take off the rear wheels, the brake drums can be removed.

Dec 03, 2014 | 2008 Dodge Avenger

1 Answer

How do I change the rear brake drums on a 2008 Dodge Avenger?


They can be stuck on pretty tight.. Remove wheel, retract brake shoes using brake spoon..access hole is in the back plate of the brake. (also make sure your emergency brake is all the way released) you may have to use a rubber maillot to get them loose. Do not go crazy with a metal hammer, you can crack the drum. little by little it will dislodge

Dec 03, 2014 | 2008 Dodge Avenger

1 Answer

How to remove the rear drum on a jeep Compass


Only rust holding it on-- from neglect

You have to take brakes apart once or
twice a year, to remove all rust & use
anti-seize, on lots of places

Once you hit a brake drum, you distort it &
it will have to be machined

If there is a hole in the drum hub area- screw in a bolt

Still have to use a rust solvent & tap it

Never tap the outside

Aug 18, 2014 | 2008 Jeep Compass

1 Answer

Smart Four Two Rear Brake adjustment


remove the rear wheels. remove the rear brake drums. you will see a gear. move the brake shoe by the gear outwards. adjust the gear but not to far. very difficult to adjust it back.

Nov 30, 2009 | 2008 Smart fortwo

1 Answer

I have a pug 406 2l hdi i have had a problem with the breaks


That sounds like a bad brake rotor or drum. If the brake rotor or drum is thick in one spot and normal on the rest that will cause the pedal to pulsate every time the the rotor or drum reaches that part of its rotation. The solution to this problem is to remove the front and rear rotors or drums and take them to a machine shop so they can be smoothed out, bear in mind you may need to replace them if the thick spot is too great.

Oct 22, 2009 | 2005 Peugeot 405

1 Answer

I have a peugoet 206 1400cc hdi its really


Replace spark plugs, air and fuel filter. That is ordinary mainteinance.
Ensure that you have spark on 4 cylinders.
Go to a garage and have car ECU (computer) scanned to retrieve error codes. That will tell you where problem can be.
Have vacuum system and fuel pump tested. This is done using a gauge tool.
Have compression tested.
Check O2 sensor, if the problem is particularly bad when engine is cold , also check AIT and MAF sensor.

Sep 21, 2009 | Peugeot Liberte Cars & Trucks

1 Answer

05 Equinox not able to remove right rear brake drum


Hiya...
Most rear brake-shoe design take some time to adjust than disc brakes...
If you have a special brake adjustment tool that your local automotive store sells, get this tool and pull out the rubber grommet plug, insert the brake adjustment tool until you 'feel' or hear the sound of 'skipping' on the brake self-adjuster spool inside as you wiggle /adjust the tool inside....(push it inside to get a firm feel that you can 'spin' it)
Try to push the tool downward or upward to check if that'll spin the brake self-adjuster part smaller to allow the brake shoes to 'shrink' which should allow you easy removal of the rear brake drum as you wiggle it out.

Be sure not to breathe in toxic brake dust upon successful brake drum removal.

Mar 28, 2009 | 2008 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...