Question about 1984 Chevrolet Corvette

2 Answers

How to check oil level - 1984 Chevrolet Corvette

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 121 Answers

Oil level on tranmission start your engine and let it run and check the o?l on gauge

Posted on Apr 24, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,316 Answers

Not sure what the question is, but check oil with engine off. Remove, wipe, re-insert and check.

Posted on Apr 23, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil level on mark when engine is cold, way high when running


Are you pulling the dip stick out with the engine running to check the oil level? You are only suppose the check the level when the engine is off. Oil level is high and in accurate while engine is running due to the oil pump pumping oil around the engine. :p

Apr 07, 2014 | 1992 Honda Accord

1 Answer

Why does the check oil level light still come on


Does it come on when your driving. Or is it all the time check fuses and church oil level

Jun 26, 2013 | 1993 Jeep Grand Cherokee

1 Answer

Buick riviera 1995 check oil level comes on


the oil level sensor in the oil pan is probably going bad.

Feb 03, 2012 | 1995 Buick Riviera

1 Answer

Just bought a 2006 Crossfire. The area where the (Trip Milage) is, a beep then the Oil Logo with the word HI comes on once a day at least. The Manual says the Oil has too much and the oil pan needs to be...


Yes its mentioned correct in manual.The HI indication comes on when there is about 1 quart too much oil. Get the excess oil drained.----------- CHECKING ENGINE OIL LEVEL:-------- A sensor in the oil pan allows oil level to be checked
without opening the hood. It provides an accurate measurement of oil level, whereas the low engine oil level indicator warns that oil level is definitely too low. With the vehicle parked on a level surface, the engine is warmed up and shut off for approximately five minutes.When the ignition switch is turned to the ON/RUN position, an ISO oil level icon appears in the trip odometer window and a "clock" icon in the cumulative odometer display. Pressing the knob to the left of the speedometer twice within one second displays one of the following messages:
• OK
• -1.0 Q (-1.0L)
• -1.5 Q (-1.5L)
• -2.0 Q (-2.0L)
• HI
The indicated amount of oil must be added to the engine
if the message -2.0 Q (-2.0L) blinks and a signal sounds.
The HI message indicates that the excess oil must be
removed from the pan to avoid possible engine or
catalytic converter damage. If the ISO oil level icon and
"clock" icon remain on when attempting to check oil
level and no message follows, or if the low engine oil
level warning lamp comes on, a malfunction in the
engine oil level system is indicated. A conveniently
located dipstick allows manual checking of the oil level.
If no leaks are noted, continue to drive to the nearest
service station where the engine oil should be topped to
the "full" mark on the dipstick with an approved oil.--------------------

Apr 09, 2011 | Chrysler Crossfire Cars & Trucks

1 Answer

I want to check the engine oil level for previa 2.4 petrol 1995



OIL LEVEL CHECK Every time you stop for fuel, check the engine oil as follows:
  1. Park the vehicle on level ground.
  2. When checking the oil level it is best for the engine to be at operating temperature, although checking the oil immediately after a stopping will lead to a false reading. Wait a few minutes after turning off the engine to allow the oil to drain back into the crankcase.
  3. Open the hood and inspect the level of the engine oil tank. The fluid level on the tank should read between FULL or F and LOW or L.
  4. If the level is below the LOW or L line, remove the cap and add enough engine oil to reach the FULL or F line. Fig. 1: Fill the engine oil tank located under the hood first 90911p07.jpg
  5. Install the oil cap and hand tighten.
  6. After filling the oil tank, remove the engine access hole cover on the drivers side. Fig. 2: Make sure the oil tank is to the F mark 90911p15.jpg Fig. 3: The oil dipstick is located under the driver's side engine access hole cover 90911p83.jpg Fig. 4: Place your finger through the hole and pull straight up to remove 90911p84.jpg
  7. Remove the engine oil dipstick and wipe it clean.
  8. Reinsert the dipstick, push it in as far as it will go, the pull it out and look at the level on the end.
  9. If necessary, insert more oil through the oil filler cap next to the dipstick, this will completely top off the system. Fig. 5: The oil dipstick has two markings for level check 90911p85.jpg Fig. 6: To fill the crankcase, remove the engine oil filler cap 90911p86.jpg prev.gif next.gif

Nov 06, 2010 | Toyota Previa Cars & Trucks

1 Answer

Where is the transmission dipstick in my manual 1.3 liter 1993 suzuki swift located and where do i fill it up?


LEVEL CHECK With Oil Level Gauge Fig. 1: Manual transaxle oil level check - with level gauge 84241046.gif
  1. Drive the vehicle to bring the transmission up to operating temperature.
  2. With the engine stopped, remove the oil level gauge front the side case of the transaxle.
  3. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
  4. Wipe off oil level gauge with clean cloth.
  5. Fit the oil level gauge to the transaxle side case so that the threads rest on top of the case.
  6. Remove the gauge and check oil level. The level should be between FULL and LOW level line.
  7. If the level is below LOW mark, add oil until the proper level is reached.
With Oil Level/Filler Plug
  1. Drive the vehicle to bring the transmission up to operating temperature.
  2. Raise and support the vehicle safely.
  3. Remove the transaxle oil level/filler plug.
  4. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
  5. Transaxle oil level should be even with the bottom of the plug hole. If oil level is low, adjust oil level accordingly.
  6. Install transaxle oil level/filler plug and tighten to 40 ft. lbs. (54 Nm).
  7. Lower the vehicle.

Oct 17, 2010 | 1993 Suzuki Swift

2 Answers

Oil light on


first make sure oil level is up, then check or just replace oil preasure switch, if light still comes on, have your oil preasure tested, could be low oil preasure or electrical problem start there. good luck.

Oct 29, 2009 | 1998 Dodge Intrepid

1 Answer

Transmission fluid level check


The owner of the car should be able to check the oil fluid and coolant levels .get a clean peace of cloth.tools for removing trans axle /differential filing plugs. so that when the oil or fluid and coolant levels are checked they must be on desired levels.Locate the oil metering rod or dipstick and measure the lubricating oil level. Remove the transmission filler plug and check oil level. Remove differential oil filler plug and check oil level .Check fluid level .check coolant level.Observe all safety rules .Use the correct preventive maintenance procedures. If the owner can't do it then it is suggested that he should go to a car mechanic and the mechanic will do the job.

Oct 01, 2009 | 1999 Daewoo Lanos

1 Answer

Need to know how to check oil in transmition in a 95 ford aspire


Check the engine oil level every time you fill the gas tank. The car should be on level ground when checking the oil.
  1. Turn the car off and wait several minutes.
  2. Locate the engine oil dipstick and withdraw it from the tube.
  3. Wipe the dipstick with a clean rag and reinsert it in the dipstick tube.
  4. Remove the dipstick again, hold the dipstick horizontally and observe the level of the oil.

5794dd4.gif
Fig. 1: Grasp the engine oil dipstick and withdraw it from the tube

22d3954.gif
Fig. 2: Observe the oil level on the dipstick and add oil if it is low

  1. The oil level should be at the FULL mark on the dipstick.
  2. If the level is at or near the LOW mark, replace the dipstick and add fresh oil to bring the level up to the FULL mark. Do not overfill.
  3. Recheck the oil level and close the hood.

Good luck, and remember rated this help!!!





Aug 18, 2009 | 1995 Ford Aspire

3 Answers

Oil level indicator fluctuates but has oil


it a common defect in the cluster it self another common problem is temp gage also 2 bars up 2 bars ..

May 27, 2009 | 1994 Lincoln Continental

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...