Question about Cars & Trucks

1 Answer

If all my tail lights and blinkers work and one brake light could it be the multifunction switch

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 10,875 Answers

No,its a bulb or bad ground for that bulb

Posted on Apr 23, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: 2001 dodge neon tail lights inop

looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.

Posted on Dec 31, 2008

  • 1 Answer

SOURCE: 2001 ford explorer sport trac

Just found the answer on another site. Sure enough went out removed the 3 philips head screws in the steering column opened it up and walla a wire connection had pulled itself free. When my son uses my truck he always uses the tilt steering, when I get in I have to readjust it. because of this the wire connection pulled itself out. I simply pushed it back in an blinker and brake light are now working. My husband is now trying to figure a way to secure the wire connection so it doesn't pull itself out again. Hope this helps others, either by saving the cost of a dealership or machanic or from getting rear ended.

Posted on Mar 21, 2009

honda guru
  • 5 Answers

SOURCE: No dashboard lights or tail lights but I got Blinkers and brakes

most like u have a blown fuse most of the time in cars they connect the tail light and instrament lights to 1 fuse

Posted on Sep 18, 2009

  • 112 Answers

SOURCE: NO LEFT SIDE TAIL ,STOP OR BLINKER REAR LEFTLIGHT

did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work

Posted on Dec 19, 2009

zappanut
  • 959 Answers

SOURCE: dashboard lights and rear exterior running lights

the fuse is labled 'brake'

I would replace the fuse... and then have someone stand to the rear of the vehicle and watch the lights come on as I applied the brake... if the fuse blows again... note which tail light did NOT come on durring this test and replace the bulb.. it is grounding to itself and causing the short.

Posted on Sep 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Brake lights. Working tail and blinker lights.


if there is a tow option on that truck check the wiring on the socket for the trailer.and where thy tie in to the rear lites sometimes ther is a short.hope this helps.lucas

Feb 19, 2014 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

Toyota tail lights not work


It could be a bad switch. if the blinkers dont work then it could be a bad multifunction switch or flasher relay. If the brake lights dont work it could be a bad break switch (located under the dash above the brake pedal). If its just the running lights could possible be the wrong kind of bulb. If nothing works at all it may be due to bad light sockets.

Apr 22, 2013 | Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

1996 chevrolet 1500 brake light and blinkers dont work


a bad turn signal switch the brake lights go threw the turn signal switch

Aug 26, 2012 | 1996 Chevrolet C1500

2 Answers

I have a 94 Chevy C1500 and the right side brake light and blinker are not working. The tail light and reverse light work though, and the right front blinker works but it blinks twice as fast as it...


It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels the brake circuit so the turn signal can work with the brake pedal depressed.

However, a more likely cause would be a break in the YELLOW/BROWN wire at the rear of the truck. It is common for the connector to get corroded at the left rear frame area where the bed harness connects to the vehicle harness. If you have trailer connections spliced into the wiring harness, these connections are also prime candidates for corrosion. I would look there first. Inspect these harnesses thoroughly all the way up and into the tail light assembly.

If the wires under the back of the truck look good, then I would check for power coming out of the turn signal switch. The wire at the turn signal switch is plain YELLOW (with no brown tracer). It is Pin (M) on the turn signal switch connector. The front signal is a LIGHT BLUE wire at the turn signal switch Pin (H). If you probe these with a test lamp, they should both work the same except the yellow wire will be hot with the brake pedal depressed and the switch NOT in the left turn position. If there is no power at the switch connector, replace the switch.

May 13, 2011 | 1994 Chevrolet K1500

1 Answer

94 gmc pick up pops brake fuse right away changed brake light switch and blinkers and tail lights still work y no 4ways or brake lights??


Check your brake light switch located under the dash on the top of your brake pedal,also it could be a broken tail or brake lite bulb.

Jan 22, 2011 | 1995 GMC Yukon

1 Answer

The brake lights wont work. The brake light over


the break light wire on the lumina runs through the blinker switch or multifunction switch on the colum.. check there as well as at the tail light sockets. on the late 90s gm cars the sockets had a tendancy to rot away... use a test light at the brake light wire in the trunk and have a friend apply the break. if there is power then may have to get new tail lights. or replacement bulbs.

Mar 13, 2010 | 1997 Chevrolet Lumina

1 Answer

Brake light/ blinker


Its one of your Relay switches.

Jul 04, 2008 | 2005 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...