Question about 2009 Chevrolet Impala
CANDACE, WHAT ARE YOU ASKING? HOW DOES IT WORK,OR YOURS DOESN'T WORK,, BETTER TAKE IT TO YOUR CHEVROLET DEALER ASK FOR SERVICE MANAGER SHOW HIM WHAT IT IS OR ISN'T DOING! HE WILL GUIDE YOU!
Posted on Jan 22, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: passenger side mirror
If you need to replace the entire mirror - it's a little involved. First you need to take the upper extension panel off from behind the mirror (black triangle) - just pull it of starting at the top. It will snap back on later. Next - remove the different screws holding the door panel in place (not the ones behind the mirror yet!) One is under the handle (pull it out and pull out the filler panel - small plastic thing that has a hole to pry it out). Then take off the rear red light - also pops off - and remove that screw. Finally - pick up the rubber filler where your fingers pull the door shut and remove these torx bolts.
Now is the tricky part. Snapp off the entire interior panel. It will pop off - but very difficult. It will sound like it is breaking! Start at the outer bottom corner - and use a door panel remover tool - check Amazon or E-bay - to keep from breaking things. Pull it out from all around the bottom and sides and then lift it up over the door lock. It good to have a friend help here. The panel will still be held on by a cable - that is your door release - leave it alone and let the panel hang by it (or better, put a box under it to rest on).
Now...remove the three bolts holding the mirror on - have a friend help hold the mirror while you do this or it will scratch your new car! Since the inner panel is off - you can also disonnect the mirror plus and remove it. It sounds silly - but the only reason to remove the door panel is to unplug it!
Get you new mirror and reverse the steps.
If you are just replacing the glass (non-heated) - get a replacement from the dealer. Adjust the mirror all the way to the inside and reach behind and pop it off. CAREFUL - put tape over the entire glass as it will likely break even more! Remove your connectors if heated - and replace (and reconnect) with your new glass. It just pops back on!
Replacing glass is easy - just be careful of cheap imitations on e-abay). And never use cheap flat glass on the passenger side! The DOT has special requirements for mirror glass - buy it from gmpartsdirect.com or your local dealer.
Posted on Jan 08, 2009
Check all fuses and relays. As far as the gas gauge, you may need a new fuel pump, fuel pump relay, or the float on the fuel pump is loose or came off from ear and tear.The mirrors: check the fuses; also, check, or have the button panel in the door checked to ensure the connection are secure. May need a new switch for the mirrors. I am not familiar with this vehicle; but this is what I suggest doing to solve the issues.
Posted on Mar 31, 2009
you should only have to remove the plastic cover at the front of the window directly behind the mirror. It should only be held in place by a few little plastic clips which are part of the cover.
Once the cover is of you should be able to see the bolts that hold the mirror to the door, if you have electric mirrors there should be a little connector plug around there that you unplug to remove the mirror
Hope this helps
Posted on May 25, 2009
Tips for a great answer:
Feb 08, 2015 | Cars & Trucks
Aug 26, 2014 | 2004 Honda CR-V
Sep 04, 2013 | Cars & Trucks
Jun 02, 2012 | 2002 Cadillac Deville
Nov 16, 2011 | Cars & Trucks
Jan 13, 2011 | Ford F-350 Cars & Trucks
Dec 12, 2009 | 2005 Chevrolet Impala
Jul 01, 2009 | 2001 Ford Taurus
Mar 31, 2009 | 2001 Nissan Quest
Jan 21, 2009 | 2005 Ford Taurus
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: