Question about 2007 Nissan Tiida 1.6

1 Answer

P1111 code on Nissan TIIDA 2007 Sedan was Diagnosed loosing power when driving.I was told about changing oil and cleaning the Intake Selonade valve.How do i clean it.

P1111 How do i clean the solenoid intake valve for my car which is loosing power when i am driving and on the silencer there is a heavy sound comes out when idling.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Try changing oil first. Intake Valve Timing Control solenoid is located on passenger side of engine bay, with an electrical connection on one end. It's held in by one 10mm bolt. It is inside the cover that goes over the camshaft pulleys. Don't use any oil additives, they can gum up the solenoid as it uses oil pressure to adjust your valve timing. If you remove solenoid, it can be cleaned with throttle body cleaner.
P1111 code on Nissan TIIDA 2007 Sedan was Diagnose - p1111-code-nissan-tiida-2007-sedan-31tyrtuzydbfleqvu5qtsvw1-2-0.jpg

Posted on Apr 25, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

(1) What is the specific Newtom torque or lb-ft for the sparks plugs NGK LZKAR6AP-11 for Nissan Tiida St C-11 2011. Engine: MR18075675R, Vin:MNBBAC11A0016494.


You miss understand why things need to be torqued .
Torque is not specific to the vehicle its the bolt how hard what is thread pitch how many threads per in or mm how many bolts and what kind compression is required .
Compression always needs to be even say you have a cork gasket on an oil pan with 25 bolts 10 ft lbs on each would give you 250 ft lbs of force but if not done in stages evenly you would be snapping bolts and bending the pan and would leak oil from the start .
Spark plugs have seals 5/8 25 lb ft is fine but its not something you are going to get a torque wrench on .

Jun 15, 2016 | Nissan Tiida Cars & Trucks

1 Answer

Nissan Ad Wagon 2007, cars is service regularly on time, just did a oil change after a week, the oil light indicator start appearing while driving..... once car is in D, 2nd & 1st and stationary n


re check your oil to see that there was enough oil put in, look for any oil leaks under the car while running , and shut off. If no oil leaking , and the level is ok, I'd say your oil pump may be getting weak

Apr 07, 2014 | 2007 Nissan Tiida 1.6

1 Answer

P1111 Nissan -qasqhai


In My Nissan March i had the same issue. P 1111 intake valve timing control valve ,
Replaced the solenoid valve
Replaced the Oil.
Any more ideas still the Check engine light is on
Have Carman Lite Scan tool (Original from korea)

Mar 23, 2014 | 2007 Nissan Qashqai 2.0

1 Answer

Iam getting a delay of a few seconds whenever i shift between neutral and drive or neutral and reverse on my 2007 nissan tiida cvt transmission.


Have the oil changed and the filter checked . I have a Mitsubishi lancer and it is in good nick but If I apply power before the shift happens it chirps the tyres . have the bands and clutch pack adjusted Run fault codes to check for faulty solenoids and servos.

Jan 21, 2014 | 1994 Nissan Altima

1 Answer

Nissan Tiida gearbox problems


hello...
i started hearing a clinching noise in my nissan tiida 2006 transmission...
it was stopping when engine becomes warm.
i changed the oil, but the noise is still there.
as if something's lose in the gearbox...
NEED HELP PLEASE....
thanks

Jan 27, 2013 | 2007 Nissan Tiida 1.6

1 Answer

Trouble code P1111 intake valve timing control circuit malfunction Bank 1.


P1111 is intake air temperature, which has nothing to do with intake variable valve timing. If the code is P1110 then yes you have a intake variable valve timing but before you throw a solenoid in the mix make sure you are properly changing oil on time and do do have low oil level you basically have poor oil maintance for P1110 to take placecansmo_161.gifcansmo_162.gif

Aug 29, 2011 | Nissan Murano Cars & Trucks

Not finding what you are looking for?
2007 Nissan Tiida 1.6 Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...