Question about 2007 Ford Five Hundred
Cannot get a reading on the code reader
Check the fuses you might have a blown fuse that powers up the data link.
Posted on Apr 22, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
right rear just in front of wheel. push clips back and remove old filter. apply new filter insuring flow is correct direction by arrow on filter press the clips back in place and you are ready. check to see if it is leaking.
Posted on Mar 16, 2009
if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck
Posted on Jun 09, 2009
First off,is the ac compressor turning?If so are the large line,near where you put freon in,cold?If the low side lines(large lines)are cold and sweating,and the evaporator box is dripping water on the ground,then the ac is most likely fine.There is a temp door in the ac blower box,that moves for hot,or cold when you select these comfort levels.This door is most likely controlled by a actuator motor.This motor is most likely bad.If it is control by vacuum,look for a broken vacuum hose,or one that has come loose under hood.
Posted on Aug 26, 2009
You need to have the transmission serviced. The wrench indicates that the fluid in your transmission is out of spec or you have an out of spec pressure condition.
Posted on Oct 12, 2009
SOURCE: codes p2106
I think you'll find it's a problem with your throttle you might need to talk to you local ford dealer but don't get talked into getting bit's replaced! I've been tld that you can put a recommended cleaner into your fuel tank and this can sometimes cure the problem - worth a go................
Posted on Jun 26, 2010
Tips for a great answer:
Jul 18, 2017 | Ford Cars & Trucks
Nov 26, 2015 | 2005 Ford Five Hundred
Mar 27, 2013 | 2006 Ford Five Hundred
Nov 25, 2012 | 2005 Ford Five Hundred
May 18, 2012 | 2006 Ford Five Hundred
Oct 21, 2011 | 2005 Ford Five Hundred
Sep 13, 2011 | 2007 Ford Five Hundred Limited Sedan
Sep 06, 2011 | 2006 Ford Five Hundred
Mar 16, 2010 | 2007 Ford Five Hundred Limited Sedan
Feb 23, 2010 | 2005 Ford Five Hundred
Dec 11, 2017 | Rover Cars & Trucks
89 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: