Question about Chevrolet Tahoe

1 Answer

How to change a coil pack on a Chevy Tahoe - Tahoe Chevrolet Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

To Remove......
1. Remove the spark plug wire from the ignition coil.
2. Disconnect the ignition coil electrical connector.
3. Remove ignition coil bolts.
4. Remove ignition coil.

To Install.....
1. Install ignition coil.
2. Install ignition coil bolts.
3. Tighten ignition coil bolts to 8 Nm the same as 71 inch pounds.
4. Connect ignition coil electrical connector.
5. And finally, install spark plug wire to ignition coil.

Posted on Apr 22, 2015

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: Missing. I get a

That code is a random misfire code. You want to check the fuel regulator first to see if it is leaking. This is a common problem with this engine and will cause all the symtoms you have and maybe more at times.On the driver side of the engine in the intake area about half way you will see a little round metal thing on the fuel rail with a vacume line going to it.Pull the vacume line off and see if there is gas there. There should be NO wetness there at all. If there is you will need to replace that and that will solve your problem. If not let me know and we will go from there. Hope this helps.....Thanks...Dan

Posted on Jul 21, 2008

  • 254 Answers

SOURCE: Just changed spark plugs and coil on my 2000 chevy

retrace your steps, you might have left something unpugged.make sure you have a strong crank

Posted on Sep 20, 2010

skychief2001
  • 21873 Answers

SOURCE: po302 code comes on my 2002 chevy tahoe

The code means the computer has detected a drop in RPM for cylinder number 2. If you know compression is good, it has to be spark or fuel.
Have you checked for power and signal for the injector with a low voltage test light ? Do you know for a fact the coil is firing on that cylinder ?

Posted on Jul 16, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many coil pack does a Chevy Tahoe have 1996


If you have a distributor there is no coil pack. The picture is coil and module.
26218643-pccvtnzbnt0gcyntawmunvgv-1-0.jpg

Jun 14, 2016 | Cars & Trucks

1 Answer

How many coil pack does a Chevy Tahoe have


If you have a distributor, there is no coil pack. You do have an ignition coil.

Jun 14, 2016 | Cars & Trucks

1 Answer

Po302 code comes on my 2002 chevy tahoe


The code means the computer has detected a drop in RPM for cylinder number 2. If you know compression is good, it has to be spark or fuel.
Have you checked for power and signal for the injector with a low voltage test light ? Do you know for a fact the coil is firing on that cylinder ?

Jul 16, 2013 | Cars & Trucks

1 Answer

Just changed spark plugs and coil on my 2000 chevy tahoe and it won't stark


retrace your steps, you might have left something unpugged.make sure you have a strong crank

Sep 20, 2010 | 2000 Chevrolet Tahoe

1 Answer

99 tahoe 350. misfire #3. new cpi unit, plugs,


coil packs? or dist engine? check coil packs for cracks and leakage on distributor egines check for side to side play in the dist shaft if any play then change it!

Jan 17, 2010 | 1999 Chevrolet Tahoe

1 Answer

I have a Chevy 2006 Tahoe. The truck is missing and sometimes struggle to go when i press the gas. Most of the time the problem is noticable when the car is stopped, it begins to kind of jump or shake.


Sounds like a cylinder is missing spark. These have "coil packs" for each cylinder, which is a coil and plug wire all in one. They do go bad, and any garage should be able to check them easily.

Sep 02, 2009 | 2006 Chevrolet Tahoe

1 Answer

One of the coil packs is not working on a 3800 V 6


have you tried changing the coil pack? they are simply a coil of wires inside. they easily go bad. just to be sure switch one of the coil packs to make sure its not a problem with the wiring, if the problem switches cylinders replace the coil pack

Aug 28, 2009 | 2000 Chevrolet Camaro

1 Answer

I have a 1999 Chevy Tahoe and yesterday while on freeway it just shut off so I sat for about 2 hours and then it started whent for about 10 minutes and it shut off again. Sat for about 30 minutes and it...


Probably your coil pack. That's usually how they act. They'll give you one extra chance to get home, and that's it. If it's not that then it's probably the fuel pump or filter, but the fact that it started again leads me to believe it's your coil pack.

May 13, 2009 | 1999 Chevrolet Tahoe

2 Answers

Missing. I get a code p0300 on the DTC. I changed out the air mass flow with and tried it on another vehicle. Changed out the coil packs one by one on a 2004 chevy tahoe 5.3 liter. changed out the plug...


That code is a random misfire code. You want to check the fuel regulator first to see if it is leaking. This is a common problem with this engine and will cause all the symtoms you have and maybe more at times.On the driver side of the engine in the intake area about half way you will see a little round metal thing on the fuel rail with a vacume line going to it.Pull the vacume line off and see if there is gas there. There should be NO wetness there at all. If there is you will need to replace that and that will solve your problem. If not let me know and we will go from there. Hope this helps.....Thanks...Dan

Jul 21, 2008 | Chevrolet Tahoe Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...