Question about Ford Cars & Trucks

1 Answer

To,be more specific it's 1966 ford F100 pickup gas gauge does not work I want to know how to wire it properly

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

You going to have a service manual with wiring diagrams and layout
also assemble and reassemble procedures for the gas guide for the trk.
now if you get the part at the local auto parts store some have the disassemble and reassemble procedures available when you buy the new part. YOU MITE HAVE TO CALL AROUND TO SEE IF ANY OF THE PART STORE HAS THIS OPTION IN THE PROGRAM OR STORE OPTIONS.
www.ask.com/disassembly_procedures_1966_ford_F100_pickup_fuel_gauge/
www.manualsonline.com/1966_ford_f100_pickup_fuel_guage_installation/removal/
www.freeproductmanual.com/1966 ford f100 pickup fuel gauge installation and removal instructions

Posted on Apr 21, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I hook up the starter relay on a 1966 Ford f100 pick up


Hook up one cable from battery to one large post and the starter to other post, then there is a small wire that comes from your ignition that is hot only in crank position that hooks up to the small post.

Apr 12, 2017 | Ford Cars & Trucks

1 Answer

1970 Ford F100 Gas Gauge Not Working


It may be the sending unit in the tank that needs replacing. Here's how you can check: Turn the key on and disconnect the sender unit at the gas tank. Ground the sender unit's wire with a jumper wire from the truck's harness to ground. Watch the gauge. If the gauge on the dash is good, grounding the sender wire will cause the gauge needle to react and should move to full. This would indicate a new sending unit is required. If the gauge doesn't move when the sender unit is grounded, the gauge is bad and needs replacing. Pull the instrument cluster out to replace the gas gauge. Likely any old ford gas gauge might work-back then, there were not so many production changes.

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

Fuel Gauge Not working on 1970 Ford F100


check to make sure you have power going to sending unit on the tank,if yes,make sure you have a good ground.check all connections.As long as the float has not broke off the sending unit inside the tank, you should be able to fix it easily

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

When I start my 1966 mustang the gas gauge goes to just under 1/4 full. The gas gauge never moves from there. I just bought the car and do know there is an electric fuel pump. anyone have any ideas on what...


The float inside the fuel tank that measures how much fuel is in the tank needs to be replaced. The unit will register 8 OHMS if its any good off the wire leading from it when its at the full position

May 16, 2010 | 1966 Ford Mustang

1 Answer

1966 ford f100 will not start repalced points plugs wires coil voltage regulatornot getting any fire


Have you checked the starter solenoid? Replace this and see if you're getting fire then. They are usually suspect and the first link in the chain between your battery and the distributor.

Dec 11, 2009 | 1966 Ford Mustang

2 Answers

1966 Ford Mustang Gas Guage not working


Hi, sounds like you have checked everything properly and you have a bad tank sender, current when checked with test lamp should pulsate.I suggest replace fuel tank sender.

Dec 01, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...