Question about 2005 Chrysler Pacifica

2 Answers

RR window went down, won't go back up. LR window won't go down. Quit a same time. Front windows work fine.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 691 Answers

The motors & inner door rail supports are serviceable parts. If you don't want to try it yourself(it's not an easy fix) auto window glass shops will usually rebuild a door window for $125 to $175 each. Based on the age of you car I'd say a weak motor is a good guess if you don't have a blown fuse, relay or obvious switch damage. I had a rear window stop working for the past year, I went over a speed bump & it started working by it self yesterday.

Posted on Apr 22, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 1,326 Answers

Ether the lr motor or switch is bad. Most likely the motor. Could you send me a picture of the switch on the front and back doors so can help you more?

Posted on Apr 22, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals do not work, have replaced module, still do not work


Find a wiring diagram an get a DVOM - digital volt ohm meter an do some electrical testing . Videos on you tube on basic automotive electrical testing , how to read a wiring diagram . Then go http://bbbind.com/free_tsb.html free wiring diagrams . What component controls windows an door locks , I know what does , what to see what you think does . The speedometer not working is probably the step motor inside the instrument cluster . New instrument cluster ! Replace the turn signal switch.
The vehicle is equipped with power door locks. Each lock actuator is powered and controlled by the door module mounted in the individual door. The driver door module (DDM) is the master control for the door lock system but the rear integration module (RIM) contains the program that determines when the lock functions are permitted.
The vehicle is equipped with power windows controlled by the door modules. The DDM receives a window switch request, over the SBI serial data, from either the passenger door module wired to the window switch pressed or from the driver door switch assembly. The DDM checks the Class 2 serial data to see if the status information is correct (i.e. ignition switch position) to permit window operation.
If the status information to permit window operation is correct, the DDM sends the command to the door module controlling the window to move the window as requested.
Windows Power and Ground
The windows are powered by discreet power and ground circuits. These circuits are in the same dedicated connector as the window motor drive circuits.
These systems are very complex and are able to set DTC'S in the controlling module .Your best bet is to take your vehicle to a qualified repair shop .
DTC B3142 LF Unlock Switch Circuit Low DTC B3147 Passenger Unlock Switch Circuit Low DTC B3152 LF Lock Switch Circuit Low DTC B3157 Passenger Lock Switch Circuit Low DTC B3172 RF Window Up Switch Circuit Low DTC B3177 RF Window Down Switch Circuit Low DTC B3182 LR Window Up Switch Circuit Low DTC B3187 LR Window Down Switch Circuit Low DTC B3192 RR Window Up Switch Circuit Low DTC B3197 RR Window Down Switch Circuit Low DTC B3377 LF Window Up Switch Circuit Low DTC B3382 LF Window Down Switch Circuit Low DTC B3387 RF Window Up Switch Circuit Low DTC B3392 RF Window Down Switch Circuit Low DTC B3397 LR Window Up Switch Circuit Low DTC B3452 LR Window Down Switch Circuit Low DTC B3457 RR Window Up Switch Circuit Low DTC B3462 RR Window Down Switch Circuit Low DTC B3467 LF Window Express Down Circuit Low DTC B3472 RF Window Express Down Circuit Low DTC B3527 Window Lockout Switch Circuit Low
DTC'S are intended to point the qualified technician in the correct diagnostic path. You may have a communication or network problem . Are you familiar with class two serial data bus communication network . The simple bus provides a means for information exchange among the vehicle door modules. Door module information on inputs and commanded outputs are converted to serial bus interface data for exchange among the door modules. The DDM can also take information from modules connected to the class 2 serial data circuit and relay the command to the simple bus interface. The vehicle power mode message (ignition switch position) from the DIM is an example. The DDM periodically addresses each module on the simple bus interface. When a module does not respond to the DDM, the DTC for that module is set. You can't just replace these modules , some need to be programmed . Dealer only ! First check codes , power an grounds etc....

Jun 29, 2016 | 2000 Buick LeSabre Custom

1 Answer

Where are the relays for the rear windows located?


There is a relay bank under the hood. According to TexasHonda
In the 03-06 models, a single relay provides pax, RR, LR window motor power. Relay is located in the pax Multiplex Control Unit in the pax side foot well. If you have power to the pax side window, relay is probably working.

Apr 25, 2015 | 2007 Acura MDX

1 Answer

I got a 2000 Pontiac trans am and every time I turn the car on the driver side window will roll down and it won't roll back up. But the passenger side window works fine. And when the stereo works the...


How about when the radio is on & the key is off or
in your hand,if you open either front door does the radio go off
& do you lose the delayed window feature assuming you have that
If so you problem is a delayed accy relay
Next would be the front door switches
I will give you credit for what you tried
but fail to see why you would switch motor
from door to door,they work powered directly or they don't
I would think your battery would have gone dead by now
if the relay failed to time out or go to sleep

Jul 27, 2013 | Cars & Trucks

1 Answer

Rear power windows don't work on 2002 envoy


may the switch from the front went out

if you can roll the back windows down the back doors then i would check the window motors

Sep 08, 2012 | 2002 GMC Envoy

1 Answer

My ac quit working (won't even blow), windows won't go up or down and radio wont work only will eject


Hi Kolya, Check around for a loose or broken cable especially around the battery connections. Regards John

Apr 23, 2012 | 1995 Chevrolet Suburban

1 Answer

The rf rr and lr windows all quit working at the same time motors operate when you suply power and ground right at the window motors


There is a switch on the driver's side next to the P/W controls that locks out all the windows you mentioned and prevents them from being operated. Check to see if that switch has been activated. If it has not been activated then there is something wrong with that switch.

Nov 27, 2009 | 2001 Pontiac Bonneville

1 Answer

My window glass stuck down ,can not bring it up to close the car window


most likely your window regulator is broken. if so i would remove the door panel and loosen it form the regulator side it up and prop it with a piece of wood. M.B. fuses their windows in an (x) ps=attern i.e. lf and rr-rf and lr. see if the opposite window works.

May 31, 2009 | 2001 Mercedes-Benz E-Class

1 Answer

1999 isuzu rodeo


the master switch is bad sad to say....they suffer greatly from manufacture defects....you can try to exchange it or find a new one
i went through 3 new ones to get a good one....i know it is expensive but the dealer may be your best bet, you can try it in the parking lot and the parts guy can watch you install it....then they have no choice but to honor the new part warranty if the new one is defective also....thanks

Jan 06, 2009 | 1999 Isuzu Rodeo

1 Answer

Rear passenger window will let down but not up


you could use a simple piece of wire to cross the pins on the back of the connector on the switch. a 14-16 gauge piece of wire is fine.  it sounds like the switch has gone faulty. 
i think on your vehicle the window switch colors should be
LF=Dark Blue, RF=Light Blue, LR=Dark Green, RR=Light Green this is for window up. just jump these to a positive feed located next to it.

Nov 28, 2008 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...