Question about 2006 Toyota Solara

1 Answer

I have a 2006 Toyota solara. low and high beam and turn signal work fine on left side, on right side the high beam doesn't work I already changed headlamp relay and bulb, any idea what can be wrong?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Toyota Expert
  • 243 Answers

Check ground(s) usually coming out of the harness trace back from headlight plug (on problem side ) until you find a ground coming out of harness and bolted to sheet metal in engine bay make sure there are no loose,corroded, broken ,or burnt wires

Posted on Apr 21, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Pontiac Vibe and my low beams stopped working. High beams, turn signals and fog lights work fine. We changed the bulbs, the fuse, and replaced the headlamp switch on the steering colum. Any...


When you say fuses does that include relays, they're the black boxes located in the fuse panel. I would check the manual and see if there is a relay for the low beams, and/or for the right-left side

Oct 12, 2013 | Cars & Trucks

1 Answer

2006 dodge ram 2500


check the tipm module for high beam driver may be bad

Oct 11, 2013 | 2006 Dodge Ram 2500

1 Answer

94 Toyota pickup 22re High beams don't work but


sounds like your switch is bad . multifunction switches are cheap at a scrap yard

Sep 26, 2013 | Cars & Trucks

2 Answers

Dodge ram 3500 turn signal - headlight problem


WAY TO GO !!! another "great idea" from vehicle manufactures

Jun 07, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

I have a 2002 Buick Rendevzeous. Sometimes the driver side low beam works, sometimes it doesn't. When it doesn't, the turn signal won't blink. It just stays dimmly lit. Right now, the low beam...


You have a bad electrical connection. Check the wiring harness and both sides of it's connectors for corrosion and or breakage. The connector terminals will become worn and corroded and the wiring sheaths a prone to weathering and become brittle. Replace or clean as needed.

Sep 04, 2011 | 2002 Buick Rendezvous

1 Answer

My light problem is i have low beam on right side no low on left side i turn highs on and right side goes out and high on left turns on then when back to lows beams and i pull turn signal to flash high...


If you have separate bulbs for the low and high beams(4 light system), if you pull the turn signal and hold it, all 4 lights will stay on until you release the turn signal. You need to replace the bright bulb on the right side and the low bulb on the left side. If your headlights only have one bulb on each side, then you will have to replace both of them to get everything to work.

Jan 04, 2011 | 2000 Ford Mustang

1 Answer

2007 toyota solara high beam doesn't work, fuses, bulbs and low beam are fine. Could it be a defective switch or sensor?


Hi, the likely problem is the combination switch/wand. The part costs $83 at autozone, but you may want to shop around. Instructions are pasted below the diagram. Please let me know if you have questions, and thanks for using FixYa.

jturcotte_627.gif


Removal & Installation

  1. Remove 3 screws and steering column cover
  2. Disconnect the connector.
  3. Release the claw and pull out the turn signal switch assembly.

    jturcotte_628.gif

Fig. Removal and installation of the turn signal switch



To install:

  1. Install the switch assembly.
  2. Connect the electrical connection.
  3. Replace the three screws in the steering column cover.

Dec 27, 2010 | 2001 Toyota Camry Solara

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

2004 GMC Yukon Denali XL - left side Headlamp issue


plug may not be completely installed? wire the low and high to each other.

Jan 25, 2009 | 2004 GMC Sierra Denali

Not finding what you are looking for?
2006 Toyota Solara Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...