Question about Opel Cars & Trucks

Open Question

Opel astra 16v 1.8 1998 torque settings on big ends and main bearings

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michael_grey
  • 365 Answers

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?
1bac25a.jpg

Posted on Jun 20, 2009

  • 167 Answers

SOURCE: WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN

Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Posted on Jul 10, 2009

  • 115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

SOURCE: hyundai elantra 1.6GLS J2 torque settings

dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Posted on Sep 23, 2009

  • 91 Answers

SOURCE: need torque settings for big end and main bearing

big end - stage one 18-22 Nm. stage 2 40-50 degrees
main bearings stage 1 20 Nm stage 2 90 degrees

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the torque settings for the Opel corsa1.4i crank mains and big ends


Please note: You must use new bolts as these are torque to yield bolts, in other words they are a type of linear spring.
Connecting rods/big-end bearing cap bolts (use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees
Main bearing cap bolts (use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Nov 22, 2016 | Opel Corsa Cars & Trucks

1 Answer

TORQUE SETTINGS ON OPEL C16SE MAIN AND BIG END BEARING TORQUE SPECIFICATIONS


Which engine size and type? Keep in mind we do not have Op[el in the USA.

Aug 22, 2016 | 2001 Opel Astra

1 Answer

Please could you help me out with the big ends, mains and flywheel torque settings for a 1995 opel astra 160ie


Main bearings stage 1 50nm stage 2 45 deg to 60 deg no flywheel info except clutch to flywheel 15nm hope it helps
coloneus

Aug 06, 2016 | Opel Cars & Trucks

1 Answer

Hi can you give me the torque setting for the opel 180ie 16v dohc main bearings please?


Suggest you buy a proper workshop manual. If you are doing main bearing replacements then you owe it to yourself, your wallet and your car to obtain a decent manual.

Jul 20, 2016 | Opel Cars & Trucks

1 Answer

Crankshaft torque settings and sequence


Suggest you buy a proper workshop manual. If you are doing main bearing replacements then you owe it to yourself, your wallet and your car to obtain a decent manual

Jul 19, 2016 | 2006 Opel Corsa 1.4

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

Hi can you help me with torque settings for main and big end bearings for 1.4 opel corsa


Connecting rod cap bolts (you must use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees

Main bearing cap bolts ( you must use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Jun 21, 2016 | Opel Cars & Trucks

1 Answer

How much to torque the big-ends. main-bearings and head bolts


go google and type in -- torque specifications for opel engine 1.6 L 1989-- and there will pages with the specs

Oct 22, 2015 | Opel Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Brad Brown

Level 3 Expert

15441 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...