Question about Seat Cars & Trucks
You can't need to replace
Posted on Apr 30, 2015
You cannot fix these belts you have to change it go on youtube look on there for your answer
Posted on Apr 21, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I'll begin by saying I'm surprised there isn't a 3rd belt on a bench seat, but I think you are entering dangerous territory. There is an immense amount of engineering, testing, and development involved in seat belt systems. They are anchored very securely at points that are reinforced and designed to withstand a human body being thrown against the belt, transferring the energy to the anchors of the belts. So, besides being beyond the scope of being possible to install by your average mechanic, I shudder to think of the legal angle. If u were to be involved in an accident, and someone was injured or worse in that seat wearing the added belt, the lawsuit possibilities are scary. Having said all this, check with your local dealer, maybe the Durango is set up somehow for an extra belt, but I've never heard it before.
Posted on Oct 13, 2008
They Are easy to replace, They mount to the floor with one large bolt. The nut below is welded so if you can obtain a large enough socket ... You may als get one from a junk yard.
Posted on Dec 31, 2008
replace it, if nothing is jambed in it then replace it its not a repairable part, dont open to try to repair, it one little part is out of alignment it may not lock in a crash, # 1 saftey first, hope this is helpful, good luck.
Posted on Dec 13, 2009
Tips for a great answer:
Please check if your seat belt has "Retractors" or "Automatic Retractor".
Follow these steps to determine if you have a retractor system that will hold car seat securely or your seat belt won't retract as should be:
A. Pull belt all the way out.
b. Allow belt to retract about 6 inches (15 cm).
c. Pull out on belt again.
If belt is locked and you cannot pull the belt out any further, you have an Automatic Locking;
If you pull the belt again all the way out and won't return to normal operation, then the mechanism is damaged, but try first the "retractor" lock to be sure. By Federal Law, nobody will sale a seat belt in a junk yard, try the dealer or order thru the dealer the whole seat belt or the mechanism. I hope that is just a matter of the automatic retractor; you can see this information in your car's manual. Try and we will see.
Jul 02, 2014 | 2005 Chevrolet Uplander
Sep 03, 2012 | 2002 Chevrolet Tahoe
Jan 16, 2012 | Cars & Trucks
Dec 08, 2010 | 1998 Chevrolet Tahoe
May 20, 2010 | 2005 Jeep Grand Cherokee
Dec 13, 2009 | 2001 Chevrolet Tahoe
Jul 08, 2009 | 2001 Chevrolet Tahoe
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: