Question about 2003 Chrysler Town and Country
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
im sure you have already checked the fuses. but sometimes one leg of the fuse could be defective. put another one in and see what happens. check owner manual to see what else runs off the same fuse. if all other applances work then its in the unit..this might have a seperate fuse built into the unit...good luck
Posted on Oct 21, 2009
There really is no way to change just the cover. Open the hatch. There are two quarter sized round plastic clips that have to be gently pulled out. Then you can remove the tail light.
Posted on Feb 21, 2010
If the coolant level (antifreeze) level is low there may not be enough fluid in the system for the temperature sensor to register a proper reading ( think of it as holding an oral thermometer just outside of your mouth).
Insufficient fluid passing through the heater core (small fan that blows through a small heated radiator) may not be enough to produce heat.
However: At increased speeds the engine may be heating what little fluid there is to a point to supply heat to the heater core, and register on the temperature sensor.
Posted on Mar 03, 2010
Tips for a great answer:
Apr 21, 2015 | 2003 Chrysler Town and Country
Mar 03, 2013 | 2002 Chrysler Town & Country
Oct 10, 2011 | 2001 Chrysler Town & Country
Jun 20, 2011 | 2003 Chrysler Town & Country
Nov 01, 2010 | 2003 Chrysler Town & Country
Oct 12, 2010 | 2003 Chrysler Town & Country
Mar 13, 2010 | 2003 Chrysler Town & Country
Oct 26, 2009 | 2003 Chrysler Town & Country
Feb 22, 2009 | 2003 Chrysler Town & Country
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: