Question about 2005 Honda Accord

2 Answers

My brake warning light stay on in my cluster on my 05 Honda Accord

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 294 Answers

First thing to try is the parking brake. Hold the button and then suddenly releases the brake in a hard manner. If that doesn't do it, check your brake fluid.

Posted on Apr 20, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Honda Master
  • 354 Answers

Hello,

The brake warning light could be that the parking brake is not fully released or the fluid in the master cylinder is low. Check both but if the master is low, you should have your brakes check because that's where the fluid went.

Good luck,
Vinnie

Posted on Apr 20, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 350 Answers

SOURCE: 1998 honda accord ex key light

hi you have a immobilizer problem its reading the key but not knocking it off its either the key reader or the ecu yates210456

Posted on Oct 08, 2008

  • 18 Answers

SOURCE: 1998 HONDA ACCORD FLASHING WARNING LIGHTS

sounds like bad wiring to me

Posted on Oct 26, 2008

  • 5 Answers

SOURCE: 1991 Honda Accord brake light probelm.

Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.

Posted on Apr 29, 2009

  • 1168 Answers

SOURCE: how do i replace honda accord 05 interior air or inside cabin fil

Hello twodoxies.

Open the glove box. Remove the damper from the glove box then let the glove box hang down.
Remove the dust and pollen filter assembly from the evaporator case.
Remove the filter from the housing, and replace the filter.
Here is a picture to help you.

84744b2.gif

There you are. Thank you for using FixYa .

KL

Posted on Apr 30, 2010

  • 4044 Answers

SOURCE: brake lamp light on a 2002 Honda Accord SE

I assume you mean the one on the dash. This is an indicator that there is a problem in your braking system. Make sure it's not low on Brake fluid and have the brake system checked or check it yourself. If your going to check it yourself I recommend the Haynes repair manual on your vehicle as a reference.

Posted on Jul 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, my brake lamp stays on after turning ignition on in honda accord 1988 carb despite all brake lamps are working fine no burnt one, I appreciate your help


Majdi, if you mean the brake warning light in the dash is on after starting your car, the light is telling you there is a fault/problem with the braking system. You should not continue to drive if the brake warning light is on, as your brakes could fail. You will have to have a good shop check your brakes and diagnose problem and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Brake lamp warning light Honda Tech
Parking Brake Warning Light
What Causes the Brake Warning Light to Come on
http://honda-tech.com/honda-accord-1990-2002-2/%22brake-lamp%22-light-went-meaning-problem-1723211

Jun 19, 2016 | Honda Cars & Trucks

1 Answer

2003 Honda Accord brake light in dash stays on


Check to make sure your parking brake isn't slightly lifted up otherwise your brake fluid is low

Jul 12, 2014 | 2003 Honda Accord 2.4 LX

1 Answer

How to turn off vim 4 warning light on acura mdx


posted under 05 pilot but is not a honda, its the Acura but no year.
no year posted. so????
vim 4,
you lost the operators guide?
what is a vim , i google it and get NADA.
where is this light, dash, or what , cluster, cluster warnings?
where?
just a clue.////????

i searched the Acura 05 FSM, no instance of VIM, in the book.
sorry. but do post a clue.

video information module, MPG4 error? wild guess?

Jan 29, 2014 | 2005 Honda Pilot

1 Answer

I have 2 Brake lights in the instrument Panel one is for the hand brake what is the other one for?


In the dash, there are 2 warning lights associated with the brake system The first and most important is the Red " BRAKE " light in the dash.One light has 2 functions. It informs you that the parking brake is engaged and more importantly it informs you that the hydraulic brake system reservoir fluid is at a low level.
The system uses a wire schematic that you can see in picture #2. From the #12 fuse, the circuit goes to the warning light in the instrument cluster. From there it travels via cables to both circuits in the brake fluid reservoir and then to ground G102 which is located behind the instrument cluster . The black buttons at the top of the reservoir are test buttons for the floats in the reservoir.

Mar 24, 2012 | 1986 Honda Accord

1 Answer

I have the same problem with my 1991 honda accord. The brake light on the driver side works but the passenger side and the back window brake light doesn't. It's not a fuse problem. I've check them all. It...


I assume you have replaced the lamps/globes with new ones, if not this is the first thing to try.
If your car is fitted with a "faulty light" sensor, ( i.e. if a warning light on the dashboard comes on when you apply the brake and a brake light bulb is not working), this may be the problem. Follow the wiring for the rear lights from the light clusters inside the trunk and you may find the wiring harness plugged into an encapsulated unit in the rear somewhere. Test if power is coming out of this unit when brakes are applied. Or, remove the covers on the brake light clusters from inside the car and check the wiring to the rear window brake light. Very often this is connected to the same ground as the drivers side light. However, the parking and tail and reversing lights usually work off the same ground, so this seems unlikely.

Feb 27, 2011 | 1991 Honda Accord

2 Answers

91 honda accord brake lights stay on replaced


are you sure you the adjustment to it is correct the button in the end of the switch has to be fully depressed to deactivate the circuit

Jan 19, 2010 | 1991 Honda Accord

1 Answer

My 1994 honda accord break lights wont turn off when car has stop


brake in a car is verry important for your saffety and others. that why they install many devices or systems to control them and make shure they work propely 1; brake light switch on the pedal floor(to indicate to the folowing car that you are stoping) 2;brake sensor fluid level (on the brake master cylinder under the hood)
to monitor the level of the fluid in the reservoir 3; brake pressure sensor (on the brake dispencer under hood) will warn you in case of brake pressure faillure .note, it may be more sensors, depending on the make of the vehicle but this is the tree comon causes for brake ligth to stay "on"

Dec 25, 2008 | 1994 Honda Accord

2 Answers

Relay


My 91 accord had the same problem. There is an electric lock out solenoid under the shift console cover. Remove a couple screws on shifter cover and you will see it. I just bent the tab that contacts the shifter instead of replacing it. Done deal.

Aug 09, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2005 Honda Accord Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...