Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 20, 2015

My running lights and turning signals do not work , but my break light and head lights work in my 2003 dodge stratus. Checked the fuses and light bulbs and were told they were good.

1 Answer

Frank Teunissen

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Apr 20, 2015
Frank Teunissen
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Oct 11, 2013
Answers
2
Questions
1
Helped
158
Points
6

Do you hear the clickin sound that you usualy hear when using turn signal or hazard lights ?

Have you checked the brake light switch that is licated at the end of the braking pedal arm (folow the metal upwards you'll encouter the switch) (use a mulyi meter on the sund mode to check if there is a closed circuit)

5 Related Answers

Ajkill

Anand Kumar

  • 2035 Answers
  • Posted on Jul 16, 2008

SOURCE: Tail lights/front parking lights don't work.

Please use this link:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800c4326



Good luck..

Ad

Anonymous

  • 96 Answers
  • Posted on Jul 31, 2008

SOURCE: Brake lights

Check your emergency flasher switch... if it located on the column it could have been "hit" and is inbetween the on and off location, this will cause the turn signals and break lights to malfunction

Anonymous

  • 463 Answers
  • Posted on Feb 27, 2009

SOURCE: 2004 Dodge Ram 1500, My right top brake light

Replace the relay if you have not already...

Anonymous

  • 4 Answers
  • Posted on Oct 11, 2009

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Anonymous

  • 84 Answers
  • Posted on Feb 03, 2010

SOURCE: dodge stratus 2004 head light bulb replacement

Headlight Bulb Replacement
1. Open the hood and remove the two headlight mounting
screws.
2. Remove the push-in fasteners for the grill area by prying under the
head of the fasteners with a flat bladed tool.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Explorer 2003 break lights and signal lights do not work on the back. Third break light on gate works

Have you checked the stop lamp isolation relay on the engine compartment fuse box? I think that could be damaged. Good luck.

74237f2e-10f9-41ea-bbbd-ba7b9777e3e3.gif
0helpful
1answer
0helpful
1answer

Dodge stratus 2003 turn signal and all lights come on when turn signal is turn on

Check all fuses inside and out in the engine compartment. Chrysler products do strange things sometimes with blown fuses! Also, they use a master light control module, usually under the dash, that runs everything. The only way to check this would be to try a good one in place of yours. It used to be bad ground connections could also cause this. If you look behind the dash for any black wires attached to a screw into metal, try wiggling them to see if the screw is tight or if a wire broke off!! Good luck!
1helpful
1answer

Where is the break light fuse on a 2003 dodge stratus

Check the power distribution box by the battery, or under the hood. The underside of the box cover should show the fuse location and its application. If not there, it would be in the fuse panel in the car. Owner's manual should tell location, if the panel cover doesn't show a diagram.
0helpful
1answer

2003 dodge stratus. I have no blinkers or flashers working at all. I have power at the fuse for blinkers. Every thing else on the turn signal switch works (headlights, wipers ect.) Just no blinkers Where...

I have a 2003 Dodge Stratus 4 door I replace my multi-function switch and I still have no functions of any blinkers at all I'm kind of thinking it might be a fuse I checked all my fuses in my fuse box relays all the fuses are good except for the fuse that might be sitting on top of the blinker I don't know what it's for it green
13helpful
1answer

Brakes Lights dont work on a 2006 Chevy Silverado

I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare
4helpful
1answer

Turn signals and hazards are not working

Look under dash on top of steering column for the hazard relay.
0helpful
1answer

Replacing rear turn signal

open the trunk... on the other side of the light, in the trunk, fold down the fabric, unscrew the light housing and pull it out... you should be able to get to the light from there.  If you can't get it I think autozone will install it for you.
Not finding what you are looking for?

95 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...