Question about 2010 Nissan Armada

2 Answers

Why are four instrument warning lights on at the same time (ABS, Stability Control, 4WD and another)?

All four came on while on a long distance trip. No signs of problem with the vehicle starting or running.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 1,326 Answers

All the systems r connected you have a problem with one of them most likely the abs I have seen wheel speed sensor go bad. Go get it scanned try autozone or similar

Posted on Apr 28, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

If possible, have someone scan it for you. It could be a bad ABS sensor, your other systems might use information from those sensors to operate. Just a suggestion for something to check out...

Posted on Apr 25, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 mercury mountaineer wrench light lit. what is that mean?


Wrench Warning Indicator (Base Instrument Cluster)
The instrument cluster receives the powertrain status from the PCM over the HS-CAN. When a powertrain system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the wrench warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the 4WD control module sends a message to the instrument cluster over the CAN to illuminate the wrench warning indicator. On 4.6L engines, if the transmission control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the wrench warning indicator.

It means a trip to the dealer or some other qualified repair shop .

May 21, 2017 | Mercury Cars & Trucks

1 Answer

My traction & stability control warning keeps coming on, not all the time but occaisionally


You have a problem with the abs an there is a code stored in the EBCM - electronic brake control module . It could be any number of thing's from a wheel speed sensor to a wiring problem or the control module or the modulation pump . As long as the light is on the ABS is deactivated . I would take it a qualified ASE certified repair shop that knows ABS systems

Apr 28, 2015 | Cars & Trucks

1 Answer

Dsc light is on now all the time


DSC means "Dynamic stability control" it is caused by some kind of failure in the ABS/Stability control system, it all one system. You will need to seek a dealer or well equipped outside repair shop with proper tools and training to find out the exact cause of the warning light being on, they will use a special tool to scan the system for the fault code that is stored in the computer control module whenever this warning light is turned on.

Sep 21, 2011 | Jaguar S-Type Cars & Trucks

1 Answer

I have a 2002 VW New Beetle. The ABS light has come on and there is a chiming beep and the ABS light flickers. What could be the problem?


ABS - Anti-lock Brake System.
If the ABS lights on the dashboard permanently the ABS system is faulty. You must access the ABS Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ABS ECU, in other words reset the ABS system and turn off the warning lamp on dashboard.
ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.

For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.
tdisline_703.jpg


ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.
The ESP system means the Electronic Stability Program. ESP system includes the ABS system.


Jun 30, 2011 | 2000 Volkswagen Beetle

1 Answer

I have a 2004 Jeep Cherokee Laredo. An indicator (with a symbol of what looks like a radiator) below the low fuel indicator (bottom left had side of the dashboard) lights up and remains on. I have checked...


2005 Instrument cluster layout
2005_cluster_01s.jpg
1. Speedometer
2. Brake warning light
3. Turn signal indicator light
4. High beam indicator light
5. Malfunction Indicator Light (MIL)
6. Airbag warning light
7. Anti-Lock brake warning light
8. Tachometer
9. Security alarm indicator light
10. Oil pressure warning light
11. Electronic Stability Program (ESP)/
Traction Control System (TCS) indicator light
12. Tire Pressure Monitor warning light (base)

13. Temperature gauge
14. Electronic Vehicle Information Display
15. Tow/Haul indicator light
16. 4WD Low mode indicator light
17. Seat belt reminder light
18. Cruise control indicator light
19. Odometer/Trip Odometer
20. Transmission gear indicator
21. Fuel gauge
22. Electronic Throttle warning light (5.7 Hemi)
23. Front fog light indicator light
24. Voltage warning light

Jun 05, 2011 | 2004 Jeep Grand Cherokee

1 Answer

2006 outback with the stability control light and engine light on with the cruse light blinking - had it back to subaru twice and no joy!


The cruise control is automatically disabled whenever there is a problem that triggers the CEL. The flashing CC indicates that it is disabled. I'm not sure about the Stability Control light being on, but would think that if there was traction problem causing the Stability Control system to kick in, it would also turn off the CC -- the SC uses braking and engine throttle to stabilize the car so the CC has to be out of the loop.

If the CEL is still on, I'd have the codes read to see what triggered it. Usually, if a problem is not detected again for three consecutive driving cycles, the CEL will go out (although the code is stored for a longer time and can still be read).
Read the codes yourself. 2005+ models display all the engine/transmission/abs/vdc codes on the dash.

Just perform this sequence within 10 seconds:

1. Turn key to ON position (just before START)
2. Turn headlights ON
3. Press Trip button 4 times
4. Turn headlights OFF
5. Press Trip button 4 times
6. Turn headlights ON
7. Press Trip button 4 times
8. Turn headlights OFF (optional)

Codes will display in the trip meter. You might have to press the Trip button to cycle between engine, transmission, and braking computers.

The abs/vdc codes, at least, should be saved forever unless a dealer clears them.

Jan 14, 2011 | 2006 Subaru Outback

1 Answer

Problem with my cruise control and ABS light on 03 Explorer


Anti-Lock Control —Vehicles Built After 03/2002 The 3-channel anti-lock brake system consists of the following components:
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • Anti-lock brake control module (ECU)
  • rear wheel speed sensor
  • rear wheel speed sensor rings
  • yellow anti-lock brake warning indicator
The 4-channel anti-lock brake system with traction control and stability assist system consists of the following components:
  • active brake booster with integral solenoid
  • brake booster release switch
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • stability assist module (ECU)
  • stability assist event indicator
  • lateral accelerometer
  • longitudinal accelerometer (4x4)
  • rear wheel speed sensors
  • rear wheel speed sensor rings
  • steering wheel position sensor
  • yaw rate sensor
  • yellow anti-lock brake warning indicator
  • brake pressure transducer
  • traction control switch
---------------------------------------------------------------------
I suspect the abs issue is causing the speed control not to work if it happened at the same time the cruise control stopped working. When the yellow ABS light comes on, it means the ABS is dactivated. You may have a faulty accelerometer which senses acceleration and yaw (side to side lean). I have not seen a bad one but you said it is sensitive to acceleration.
I would unplug it and see what happens. The connector should have a small tab to depress so you can pull the connector out.
Here is where it is:

Accelerometer Removal and Installation
  1. NOTE: The accelerometer is located under the center, rear passenger seat carpet. (I think you have to remove seat for access).
    Cut the carpeting along the perforations.
  1. Disconnect the electrical connector.
  1. Remove the nuts and remove the accelerometer.
cd31596.gif
Have dealer hook up tester and pull fault codes if you can't find an easy solution.
Some background info
  • A malfunction in the anti-lock brake system will cause the anti-lock brake control module to shut off or inhibit the system. However, normal power-assisted braking remains.
  • Malfunctions are indicated by the yellow ABS warning indicator in the instrument cluster.
  • The anti-lock brake system is self-monitoring. When the ignition switch is turned to the RUN position, the anti-lock brake control module will carry out a preliminary self-check on the anti-lock electrical system indicated by a three-second illumination of the yellow ABS warning indicator in the instrument cluster.
  • During vehicle operation, including normal and anti-lock braking, the anti-lock brake control module monitors all electrical anti-lock functions and some hydraulic operations.
  • Each time the vehicle is driven, as soon as vehicle speed reaches approximately 20 km/h (12mph), the anti-lock brake control module turns on the pump motor for approximately one-half second. At this time, a mechanical noise may be heard. This is a normal function of the self-check by the anti-lock brake control module.
  • Pedal pulsation coupled with noise while braking on loose gravel, bumps, wet or snowy roads is normal and indicates correct functioning of the anti-lock brake system.
  • Warning Lamp Indicator
    The anti-lock brake system (ABS) uses the yellow ABS warning indicator to alert the driver of a malfunctions in the ABS.
    The yellow ABS warning indicator will come on to warn the driver that the ABS has been turned off due to a symptom that exists in the ABS. Normal power assist braking remains but wheels can lock during a panic stop while the yellow ABS warning indicator is illuminated.

    -----------------------------------------
    Please report back, I am curious if that is what it is. Good luck

    Mar 03, 2009 | 2003 Ford Explorer

    1 Answer

    I have a 2001 hyundai elantra and the warning lights on the dashboard. I know what the oil light looks like and the airbags. What are the other two lights.


    Your best bet is to go HERE and signup for a free account then Downloading your Manual - service sheets, diagrams, parts lists etc.
    Hyundai is one of the best with providing their customers with free information about the vehicles!!

    I have D/L the manual, and the warning lamps on the instrument cluster are...
    Left to right...(starting under temp. Gauge)

    WITHOUT TRIP COMPUTER
    11. Traction Control Indicator Light (If installed)

    12. ABS Warning Light (If installed)

    13. Seat Belt Warning Light

    14. Oil Pressure Warning Light

    15. Charging System Warning Light

    16. Parking Brake/Brake Fluid Level Warning
    Light

    17. Malfunction Indicator Light (MIL)

    18. SRS (Airbag) Warning Light

    19. Trip Odometer/Odometer

    20. Trip Odometer Reset Knob

    21. Low Fuel Warning Light

    WITH TRIP COMPUTER

    7. Front Fog Indicator Light (If installed)

    8. Door Ajar Warning Light

    9. Trunk Lid Open Warning Light

    10. Parking Brake/Brake Fluid Level Warning
    Light

    11. Malfunction Indicator Light (MIL)

    12. Charging System Warning Light

    13. Oil Pressure Warning Light

    14. SRS (Airbag) Warning Light

    15. Cruise Indicator Light (If installed)

    16. Seat Belt Warning Light

    17. ABS Warning Light (If installed)

    18. Traction Control Indicator Light (If installed)

    19. Automatic Transaxle Position Indicator Light
    (Auto T/A only)

    22. Low Fuel Warning Light


    Thanks for using FixYa - a FixYa rating is appreciated!!

    Feb 21, 2009 | 2001 Hyundai Elantra

    Not finding what you are looking for?
    2010 Nissan Armada Logo

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    713 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...