Question about 2001 Fiat Punto

Open Question

Why when I press the brakes or I signal right or left, the yellow circle light for the lights comes on ?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A warning light on my mini one diesel 2011. a yellow circle with capital (A) in centre


I think you mean the yellow circle with the triangle and the exclaimstion point? ... That would be a service light. If it says ABS in the center (orange warning light ln the right, not left) then your brake system needs inspected or serviced.

Aug 14, 2016 | Mini Cars & Trucks

1 Answer

Left hand turn signal works right one does not , four ways do not brake lights do not . Believe it could be either the turn signal switch or the four way switch


It could be the turn signal switch. the white wire comes from the brake switch into the turn signal switch. Make sure that is hot with brakes applied. the wires coming out of the turn signal switch to the left is Yellow, and Dark Green for the right. Same for the turn signals.

Sep 12, 2011 | 1995 Chevrolet Silverado 2500

1 Answer

The three wires to the tow lights have been cut, and i cant find where in the harness they are cut can i bypass it all and just rerun new wires?


Yes. But do you have seperate yellow turn signal lights in the rear or do the turn signals work independant of the brake lights? If yes then you need to wire in a taillight converter. It takes your seperate left & right turn signals combines them with your brake lights on 2 wires instead of 3 leaving you with your normal 4 wires in total instead of 5. 1 Left turn & brake light. 1 Right turn & brake. 1 Taillight. 1 Ground. = 4 wires in total. If you dont have seperate rear turn signals just find left turn wire in taillight assembly, Right turn wire & Taillight & a good ground & you are done. On trailer plug yellow is left, green is right ,brown is tailight & white is ground.

Jun 06, 2010 | 2004 Dodge Dakota

1 Answer

REAR BRAKE LIGHTS DO NOT COME ONLY TAP LIGHT IS


Check for power at the turn signal switch. White wire comes from brake switch switch into the turn signal switch. The brake light switch is working because the high mount brake light is working..right? Do the turn signals work ok? if so, then the wiring is OK. The brake signal wires that come out of the turn signal switch are dark green(right) and yellow (left).

Oct 27, 2009 | 2001 GMC Safari

1 Answer

I need to know what colors are for the brake lights, left and right turn signals, running lights, brakes and flashers so I can hook up a plug for a utility trailer


brown= running lights
green=right turn
yellow=left turn
the brake lights run of of the turn signal
white is the ground

Sep 26, 2009 | 1993 Chevrolet K2500

1 Answer

None of the lights or anything work on the trailer. they did on the trip home except for the brake light on left side. i dont know which fuses to check and where to find them or what else it could be.all...


Hi MW,

First, here are the pinouts for the 4-way.

White = Ground
Yellow = Left turn/Brake
Green = Right turn Brake
Brown = Tail and clearance lights

Ground should be 10ga.
Others 14 ga

To troubleshoot this, you'll need a test light or multimeter and a helper to press the brakes, etc.

From the plug on the vehicle, clip the ground to the white wire.
Probe Yellow - s/b out
Press brakes - s/b on
Left signal - s/b blinking

Probe Green - s/b out
Press brakes - s/b on
Right signal - s/b blinking

Probe Brown - s/b out
Switch on headlights - s/b on

If all these pass, the trouble is on the trailer. Keep working down to the tail lights themselves. Concentrate on the green and brown wires.

Hope this helps
Mike

Aug 14, 2009 | 2005 Nissan Pathfinder

1 Answer

Cant read dashborad light


sounds like your brake lining light. It means your brakes have worn below specification. The light to me kinda looks like a yellow circle with two dashes on one side and two on the other and they follow the curvature of the circle. On an x3 you can get a pretty good view of the brake pads looking through the wheel.

May 03, 2009 | 2000 BMW 3 Series

1 Answer

Can't figure out why no power is getting to the right side brake light and turn signal. The other lights work on the tailight. I checked the fuses. brake light switch, and checked the wires for damge.


your wiring may have gotten pinched by crossmember or something else.i would check for power out of the fuse block.there are four wires on the right side coming out of your fuse box with a seperate flat vertical plug,the colors are brown,dark green,yellow and light green.brown is tailight,light green for your backup lights and green and yellow for left and right stoplight/turn signals.use a test light at the plug.

Mar 28, 2009 | 1985 GMC K1500

3 Answers

Trailer wiring for 06 GMC Canyon 4x4


exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....

Aug 13, 2008 | 2006 GMC Canyon

2 Answers

Signal and brake lights


Igot the same problem on left side.The problem was the convertor for the trailler plug.

Jul 16, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2001 Fiat Punto Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...