Question about Cars & Trucks

1 Answer

Wher can I get this part that fits over the manifold and connects to the air intake.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 352 Answers

You have to tell us make, model, and year to get precise help here.

Almost any auto part can be obtained from Rock Auto. RockAuto Parts Catalog

Posted on Apr 20, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is intake,mafsensor,iac valve,andthe idle stabilizer valve located


Assuming it is a 4-cyl, the intake is the large tube connecting the air cleaner housing to the intake manifold, which is the metal body behind and above the top of the engine. See here, p2, p40. p168
http://www.turboninjas.com/camry/eg1.pdf

The Mass Air Flow sensor if fitted (not all Camrys had one that early) is fitted in the air intake just after the air cleaner and before the throttle body.
If you mean the Manifold Air Pressure sensor (different) that sits on the firewall flange behind the intake manifold. Follow the hose from the air intake chamber, p46
The Idle Air Control Valve is on the throttle body, see p168 and p208.

I don't know of an Idle Stabilizer Valve by that name on this engine, I think it is an alternative name for the IAC valve.

Oct 27, 2012 | 1991 Toyota Camry

1 Answer

Hi, got a 1999 pontiac grand prix se, and installing an aftermarket intake, there is a pvc fitting on the intake, yet on the oem intake there wasnt a pvc hose/fitting, where to connect the pvc hose from...


Aftermarket manifolds have fittings for several engine years. If the new manifold has a fitting port that is unneeded, use a pipe plug of the correct size with a wrap of Teflon plumbing tape on it and block it off.
Do not over tighten the plug or you can damage the manifold. "just tight" is tight enough.

Jun 01, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

Wher is the air charge temp sensor located on a 97 honda accord 4 cyl.


INTAKE AIR TEMPERATURE SENSOR LOCATED ON THE INTAKE MANIFOLD.

Feb 03, 2011 | 1997 Honda Accord

1 Answer

Wher is the nanifold located


There is an intake and exhaust manifold on these cars. Which one do you mean?

The intake is connected to the air duct and the throttle body.
The exhaust is connected to the head, but is generally lower than the intake manifold and may be made of iron.

Jan 24, 2011 | 1995 Oldsmobile Aurora

1 Answer

P1031


.P1031 Intake manifold air control valve position sensor
Possible Causes - Intake manifold air control valve position sensor circuit open circuit
- Intake manifold air control valve position sensor circuit poor electrical connection
- Faulty intake manifold air control valve position sensor
- Intake manifold air control flap too tight or sticking a four thumbs up rateing will be appreciated thank you have a nice day

Dec 28, 2010 | 2005 Volkswagen Golf

1 Answer

How to remove intake manifold on 2005 Buick Lesabre


You didn't post the size of your engine so please pick the appropriate one:

3.8L
  1. Relieve the fuel system pressure.
  2. Drain the cooling system.
    1. Remove or disconnect the following:
    2. Negative battery cable
    • Supercharger
    • Thermostat housing
    • Exhaust Gas Recirculation (EGR) tube at the intake manifold
    • Engine Control Temperature (ECT) sensor
    • Intake manifold
  • To install:

    1. Install or connect the following:
      • Intake manifold with new gaskets. Torque the bolts, working from the center out, to 11 ft. lbs. (15 Nm).
      • ECT sensor connector
      • EGR tube to the intake manifold
      • Thermostat housing
      • Supercharger
      • Negative battery cable
    2. Refill and bleed the cooling system.
    3. Run the engine and check for leaks and proper engine operation.
    4.6L
    4.6L Engine
    1. Remove the brake booster hose from the throttle body.
    2. Remove the fuel pressure regulator vacuum tube from the fuel pressure regulator and the water crossover.
    3. Remove the PCV fresh air feed tube from the camshaft cover and the throttle body.
    4. Remove the PCV dirty air tube from the PCV orifice in the right camshaft cover and from the intake manifold.
    5. Disconnect the fuel injector electrical connectors from the fuel injectors.
    6. Remove the fuel injector wiring harness.
    7. Remove the fuel rail bracket nut from the engine lift bracket.
    8. Remove the fuel rail studs.
    9. Lift and remove the fuel rail with injectors.
    10. Loosen the plenum duct clamp in order to remove the intake manifold.
    11. Remove the intake manifold bolts.
    12. Remove the intake manifold.

    To install:

    1. Install the intake manifold, fitting the plenum duct over the intake manifold duct.
    2. Loosely install the intake manifold bolts.

    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 45; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; c17hydro_21.gif

    Intake manifold torque sequence-4.6L engine


    1. Tighten the intake manifold bolts in sequence. Tighten the intake manifold bolts to 89 inch lbs. (10 Nm).
    2. Tighten the plenum duct clamp to the intake manifold. Tighten the plenum duct clamp to 24 inch lbs. (2.75 Nm).
    3. Inspect the fuel injector O-rings. Ensure the fuel injector O-rings are not missing, misaligned or damaged. Replace the O-rings if necessary.
    4. Lubricate the intake manifold fuel injector bores with light mineral oil (GM P/N 9981704), clean engine oil, or equivalent.
    5. Install the fuel rail with fuel injectors as an assembly.
    6. Install the fuel rail studs. Tighten the fuel rail studs to 80 inch lbs. (9 Nm).
    7. Install the fuel rail bracket nut to the engine lift bracket. Tighten the fuel rail bracket nut to 89 inch lbs. (10 Nm).
    8. Install the fuel injector wiring harness.
    9. Connect the fuel injector electrical connectors to the fuel injectors.
    10. Install the PCV dirty air tube to the PCV orifice in the right camshaft cover and to the intake manifold.
    11. Install the PCV fresh air feed tube to the camshaft cover and the water crossover.
    12. Install the fuel pressure regulator vacuum tube to the fuel pressure regulator and the throttle body.
    13. Install the brake booster hose to the throttle body.

    Nov 13, 2010 | Buick LeSabre Cars & Trucks

    2 Answers

    Where is the #6 electronic fuel injection plug for 1999 plymouth grand voyager 3.3 engine


    3.3L & 3.8L Engines
    Firing order: 1-2-3-4-5-6
    Distributorless Ignition System chry-02-33-786.gif
    The Driver's Side Front spark plug is the #6 cylinder.

    Aug 08, 2010 | 1999 Plymouth Grand Voyager

    2 Answers

    Need to replace the intake manifold


    3.8L Engine (most common) Upper Intake Manifold To Remove:
    1. Drain the cooling system.
    2. Remove or disconnect the following:
      • Negative battery cable.
      • Fuel injector sight shield.
      • Air cleaner intake duct.
      • Right spark plug wires from the ignition control module and reposition.
    3. Relieve the fuel pressure.
    4. Remove or disconnect the following:
      • Fuel rail assembly.
      • Brake booster hose from the vacuum source manifold in the upper intake manifold.
      • Exhaust Gas Recirculation Valve (EGR) wiring harness heat shield nut, bolt and the EGR heat shield.
      • Throttle body support bracket upper bolt.
    5. Disconnect the electrical connectors from the following:
      • EVAP purge solenoid
      • Throttle Position (T/P) sensor
      • Idle Air Control (IAC) valve
      • Manifold Absolute Pressure (MAP) sensor
      • Mass Air Flow (MAF) sensor
      • EVAP purge solenoid vacuum line from the throttle body.
      • Accelerator and the cruise control cables with the bracket from the throttle body.
    6. Remove or disconnect the following:
      • Upper intake manifold bolts and stud.
      • Clean the upper intake manifold bolt threads.
    7. Remove or disconnect the following:
      • Upper intake manifold by lifting the back of the intake and sliding the manifold forward from the throttle body support bracket.
      • Upper-to-lower intake manifold carrier gasket from the upper intake manifold.
    8. If the upper intake manifold is being replaced, remove the following:
      • Throttle body assembly.
      • Manifold Absolute Pressure (MAP) sensor.
      • Positive Crankcase Ventilation (PCV) valve.
      • Vacuum source manifold.
    Upper intake manifold bolt torque sequence (3.8L engine) gm-03-38-530.gif

    To Install:
    1. If the manifold was replaced, install or connect the following:
      • Vacuum source manifold.
      • Positive Crankcase Ventilation (PCV) valve.
      • Manifold Absolute Pressure (MAP) sensor.
      • Throttle body assembly.
      • Upper-to-lower intake manifold carrier gasket to the upper intake manifold.
    2. Carefully place the upper intake manifold onto the lower intake manifold. Ensure that the alignment pins in the upper intake manifold align with the holes in the lower intake manifold. NOTE: Apply thread lock compound, to the bolt threads before assembly.
    3. Install or connect the following:
      • Upper intake manifold. Tighten the upper intake manifold bolts in sequence to 89 in lbs (10 Nm)
      • Accelerator and the cruise control cables with the bracket to the throttle body.
      • EVAP purge solenoid vacuum line to the throttle body.
    4. Connect the electrical connectors to the following:
      • Mass Air Flow (MAF) sensor
      • Manifold Absolute Pressure (MAP) sensor
      • Idle Air Control (IAC) valve
      • Throttle Position (T/P) sensor
      • EVAP purge solenoid
    5. Install or connect the following:
      • Throttle body upper support bracket bolt. Tighten the bolt to 89 in lbs (10 Nm)
      • EGR valve wiring harness heat shield, nut and the bolt. Tighten the nut and the bolt to 89 in lbs (10 Nm)
      • Brake booster hose to the vacuum source manifold.
      • Fuel rail assembly.
      • Right spark plug wires.
      • Air cleaner intake duct.
      • Fuel injector sight shield.
    6. Connect the negative battery cable.
    7. Fill the cooling system.
    8. Inspect for fluid or vacuum leaks.
    Lower Intake Manifold (W/O Supercharger) To Remove:
    1. Remove or disconnect the following:
      • Upper intake manifold.
      • Generator brace.
      • Drive belt tensioner with the mounting bracket and the heater water bypass inlet pipe.
      • Exhaust gas recirculation EGR outlet pipe bolt from the lower intake manifold.
      • Radiator inlet hose from the water outlet housing.
      • ECT sensor electrical connector.
      • Right upper engine mount strut bracket.
      • Generator brace bracket bolts.
      • Generator brace bracket.
      • Lower intake manifold bolts.
      • Lower intake manifold.
      • Lower intake manifold seals.
      • Lower intake manifold gaskets.
    2. If replacing the lower intake manifold, Remove or disconnect:
      • Water outlet housing bolt and stud
      • Water outlet housing
      • Gasket and the thermostat.
      • ECT sensor.
    3. Inspect the flatness of inlet flanges.
    4. Clean the intake manifold mating surfaces.
    5. Clean the intake manifold bolts and bolt holes of adhesive compound.
    To Install:
    1. If removed, install the ECT sensor.
      • Tighten the ECT sensor to 18 ft. lbs. (25 Nm)
    2. If removed, install the thermostat, the gasket, and the water outlet housing.
    3. If removed, install the water outlet housing bolt and the stud.
      • Tighten the bolt and stud to 20 ft. lbs. (27 Nm)
    4. Install or connect the following:
      • Lower intake manifold gaskets. NOTE: Apply sealer GM P/N 12346286 (Canadian P/N 10953472) or equivalent to the ends of the intake manifold seals.
      • Lower intake manifold seals.
      • Lower intake manifold.
      • Lower intake manifold bolts.
      NOTE: Apply thread lock compound GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the two hidden bolts and ensure they are installed.
    5. Tighten the lower intake manifold bolts in sequence to 11 ft. lbs. (15 Nm) gmpc_v6_5.gif

    6. Install or connect the following:
      • Generator brace bracket.
      • Generator brace bracket bolts. Tighten the bolts to 37 ft. lbs. (50 Nm)
      • Right upper engine mount strut bracket.
      • ECT sensor electrical connector.
      • Radiator inlet hose to the water outlet housing.
      • EGR outlet pipe to the lower intake manifold.
      • EGR outlet pipe bolt to the lower intake manifold. Tighten the bolt to 21 ft. lbs. (29 Nm)
      • Drive belt tensioner.
      • Generator brace.
      • Upper intake manifold.
    7. Inspect for leaks.
    Lower Intake Manifold (W/ Supercharger) To Remove:
    1. Disconnect the negative battery cable.
    2. Drain the cooling system.
    3. Remove the supercharger.
    4. Remove the thermostat housing.
    5. Remove the EGR pipe at the intake manifold.
    6. Disconnect the electrical connection at the temperature sensor.
    7. Remove the intake manifold and gaskets.
    NOTE: The coolant bypass tube will release from the intake manifold when the manifold is removed.
    To Install:
    1. Clean the gasket sealing surfaces.
    2. Install the intake manifold gaskets.
    3. Align the coolant bypass tube with the opening in the intake manifold and install the manifold. Tighten the bolts to 11 lb ft (15 Nm).
    4. Install the electrical connector to the temperature sensor.
    5. Install the EGR pipe to the intake manifold.
    6. Install the thermostat housing.
    7. Install the supercharger.
    8. Fill the cooling system.
    9. Connect the negative battery cable.

    Aug 05, 2010 | 1997 Pontiac Grand Prix

    2 Answers

    Wher is the thermostat located on a 2000 olds silhouette?


    Follow the large radiator inlet hose from the radiator, to the thermostat housing. Once the housing is located, simply remove the housing to expose the thermostat. It may be necessary to remove the air cleaner and duct assembly, and the crossover exhaust pipe, as well.

    Nov 10, 2009 | 2001 Oldsmobile Silhouette

    2 Answers

    Intake air temprature sensor


    Air intake temperature sensor is fitted in the hose from the air cleaner box to the intake manifold. You will see a unit with electrical connection .
    Hope this helps

    Jan 23, 2009 | 2004 Land Rover Discovery

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    75 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76673 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...