Question about Toyota Cars & Trucks

Open Question

On my Toyota Granvia, the check engine light comes on at about 120kms and power drops. When the speed decreases to about 80 kms, the light goes off. What's wrong?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: 97 wrangler oil pressure drops when engine is at idle

check the engine oil level... you could possibly need to replace the oil pump soon... if you do not live in a cold climate i would consider using 30 or 50 weight oil. do NOT use that in a cold climate as the oil is like molasses when it gets cold.
that's only temporary. one other thing to consider is a clogged oil filter... when was the last time it was changed ?

Robert

Posted on Dec 18, 2008

  • 36 Answers

SOURCE: 2003 AUDI Quattro 3.0 check engine light(MIL) stays on

Before you do anything else you are just going to have to read the codes. So buy the maintance book at autozone,locate the little juction box on the fire wall and jump the terminals with a little wire. Then of course sit in the drivers seat turn on the key(do not start) and read the blinks. Then you will know what the problem is.

Posted on May 06, 2009

  • 218 Answers

SOURCE: the check engine light (MIL)on

THE LIGHT IS STORING A CODE IN THE PCM.NEED TO HAVE THE PCM READ BY A SCAN TOOL .ONCE U HAVE THE CODE U WILL FIND OUT WHAT CIRCUIT THE PROBLEM IS IN,.

Posted on May 06, 2009

  • 507 Answers

SOURCE: 2003 Toyota Prius Hybrid, Power Steering problem

I don't know about hybrids, but on most vechiles, you check power steering fluid with engine running.

Posted on Jun 23, 2009

  • 1 Answer

SOURCE: Engine light comes on

I'm having the same problem with my 2002 Camry but i've been driving on this condition for a couple months. What long term damage can this cause? Also, Good year is trying to charge me about 500 dollars to get this problem fixed. Is that a normal price for this repair?

Posted on Feb 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 rodeo diesel,engine light comes on @100-110kms hour,will cruise at that,but wont go any faster unless u put foot hard to the floor,after about 5-10secs light goes away,motor picks up,comes up as


check that the engine light coming on is in fact a warning light telling you that you have reached max road speed allowable . By putting the foot down you are telling the ECM to ignore the setting and to increase the available power to go faster ( as in passing ) run the fault codes to check for sensor problem and talk to a service dealer as to the reason as there may be an upgrade for the CPU software in the ECM.

Nov 11, 2014 | Cars & Trucks

1 Answer

Hi I have my transmission of mercury mystique 1995 ,it shift from gear 1 to 2 easily and from 2 to 3 easily but when the car speed close to 80 kms/hr it start to shout and the engine speed jump to 4000 RPM...


is your transmission a automatic or standard ? Do you have a check engine light on ? If it is a automatic, was the service you had done a drain and fill or a complete flush, and finally what do you mean it start to shout

Nov 01, 2011 | Cars & Trucks

1 Answer

Hi my name is nick... I have a 1991 celica sx 5sfe engine. Problems 1. vibration in a particular speed 80-100 kmh, checked wheel balance and alignment still? 2. some times car becomes sluggish and...


Check 5 things Balance, (including road force that checks the integrity of your rims).
Tires if they are cup, they vibrate the vehicle at high speed.
Wheel bearings for movement. Tied rod ends for looseness,
If you brake and rotors pulsate, those rotors will create vibration at high speed.

Jan 03, 2011 | 2001 Toyota Celica

1 Answer

Driving normal, at 80 kms, car seems to studder a bit, (gas wise) engine light comes on. Stop car, re-start, everything fine, no engine light, at 60 kms, fine, get up to 80 km, engine light comes on and...


First try replacing air filter if not done recently $30, next consider bad fuel put in fuel from major oil company from station with many patrons.Then you need to look at fuel delivery system including fuel filter and furl pump. But first try the 2 things mentioned.

Jan 22, 2010 | Land Rover Freelander Cars & Trucks

1 Answer

1KZ-TE Toyoto 3L TDi in Granvia Engine Warning Light comes on with hard accelleration when hot and maximum speed steadily lowers to 30mph.Code shows for "low fuel-pressure". Filter changed, pipes all clear...


Install fuel pressure guage, clamp off return side and verify the exact pressure it is producing to the injector rail. Checkmanufacturer specs. If it is not sufficient. Replace pump.

Aug 25, 2009 | Toyota Passenger Cars & Trucks

1 Answer

The check engine light (MIL)on 2003 Audi quattro 3.0 stays on when car is running. Goes off sometimes on its own and then comes back on but it doesnt flash. When driving at high speeds( 120 kms or over),...


THE LIGHT IS STORING A CODE IN THE PCM.NEED TO HAVE THE PCM READ BY A SCAN TOOL .ONCE U HAVE THE CODE U WILL FIND OUT WHAT CIRCUIT THE PROBLEM IS IN,.

May 06, 2009 | Audi A4 Cars & Trucks

1 Answer

The car's peformance has been poor, especially on picking from a stationary position (no power).


I would suggest to have the pump timing reset and probably have a diesel specialist to check the pump as well. It is very difficult to give extra help over the net as most of the things have been covered by the mechanic I supposed. But as per your description I think the pump may have not been timed properly or it may need overhauling as well.
Cheers

Apr 23, 2009 | Toyota Land Cruiser Cars & Trucks

2 Answers

My Toyota Granvia timing belt light cannot be switched off. Even


Remove the dash clocks 5x philips srews.
In the back of the clocks there is a screw that needs moving from one hole to another, they are marked t- belt, keep looking their fairly small
Andy

Jan 22, 2009 | 1995 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...