Question about 2000 Chevrolet Blazer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take the air inlet hose off where it enters the throttle body and take a look at the throttle plates. It is likely that they’re dirty and have a build-up of carbon deposits. That is the most common cause for stalling that we see in the shop for your vehicle. Sometimes all it takes is a good cleaning to cure the stalling problem. There is an idle speed setting on your Jeep, but to check and/or perform this service step requires the use of a computer scan tool for your vehicle. If the cleaning doesn’t help ask a repair facility to check and reset, if needed, the minimum idle speed on your Jeep.
Posted on Nov 27, 2008
SOURCE: 2002 Chevy Blazer stalls
check airflo sensor or potentometer,throttle pos sensor; if revs are to low when turning the wheel the power steering pump will draw power from engine, causing your other problems
Posted on Jan 07, 2009
The Idle Air Control (IAC) valve is clogged. This part feeds air to the engine at start-up and idle when the throttle bodies are closed. I removed the throttle body assembly from my 2001 RX300 and separated it from the IAC. After a good cleaning with throttle body cleaner the IAC was good as new. I later decided to replace it during routine maintenance. You can pick up a brand new IAC on eBay (genuine Lexus/Toyota part). The dealer will want upwards of $400.00 for a 45 minute job (all you need are basis hand tools).
Posted on Mar 23, 2009
Withoutknowing if the check engine light is on it could be a variety of things including but not limited to the o2 sensor, throttle positioning sensor, and the MAF and MAP sensors. Best diagnosed by using an OBDII scanner to scan for codes. If no codes are present I would then check for the pressure coming from the fuel pump to make sure it is still functioning.
Posted on May 21, 2009
Tips for a great answer:
Jan 05, 2016 | Cars & Trucks
Feb 16, 2015 | 2002 Toyota Sienna
Dec 05, 2013 | 1999 Ford Explorer
Oct 06, 2013 | Buick Cars & Trucks
Jan 26, 2013 | 1993 Chevrolet S-10 Blazer
May 13, 2010 | 2001 Chevrolet Blazer
Mar 11, 2009 | 1986 Chevrolet S-10 Blazer
Dec 31, 2008 | 1991 Chevrolet S-10 Blazer
56 people viewed this question
Usually answered in minutes!