Question about 2000 Mazda B-Series
Posted by Anonymous on
The longer side of the thermostat goes towards the engine block.
Posted on Apr 20, 2015
Hello, If your engine does not overheat after you have driven it for ten minutes, you installed it correctly.
Posted on Apr 20, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: replacing the heater core in
From Haynes Repair Manual #36071, Ford Ranger Pickups 1993 - 2005 and Mazda Pickups 1994-2005 B2300, B2500, B3000, B4000: (1)Disarm the airbag system; (2)allow the cooling system to completely cool down; (3)using a thick cloth for protection, turn the radiator filler cap to the first stop; (4)step back and let the pressure release; (5)once the pressure has been released, completely drain the cooling system; (6) working within the engine compartment, loosen the ****,ps on the heater hoses at the engine compartment side of the firewall, twist the hoses and carefully sepseparate them from the heater core tubes; (7)plug or cap the heater core tubes to prevent coolant from spilling into the passenger compartment when the heater core is removed; (8)place a plastic sheet on the floor of the vehicle to prevent stains if the coolant spills; (9)remove the instrument panel; (10)remove the PCM heat sink and ground strap; (11)remove the heater plenum chamber; (12)separate the heater core from the heater plenum chamber; (13)installation is the reverse of the removal with the following additions; (a)fill the cooling system; (b)run the engine, check for leaks and test the heater
Posted on Aug 21, 2008
SOURCE: fuse box for 1998 mazda b3000
There are really 2 boxes
Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
Power distribution box
The power distribution box is
located in the engine compartment
near the battery. The power
distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
Posted on Jun 01, 2009
Jack up the car as normal remove the wheel put another jack under the wishbone jack it up until you relieve the tension on the balljoint. If the nut on the end of the balljoint is looking up remove the balljoint screws and nut if the nut is looking down then you may have to remove the front drive in order get the balljoint out.
Posted on Aug 05, 2009
Tips for a great answer:
Mar 17, 2018 | Mazda Cars & Trucks
Nov 15, 2016 | Mazda Cars & Trucks
Jun 04, 2015 | Mazda Cars & Trucks
Mar 22, 2014 | 2000 Lincoln LS
Jul 14, 2011 | Mazda B3000 Cars & Trucks
Mar 02, 2011 | Mazda B3000 Cars & Trucks
Oct 23, 2010 | 2007 Mazda B3000
Oct 02, 2009 | 2000 Mazda Pickup Troy Lee Cab Plus 4
Aug 21, 2008 | Mazda B3000 Cars & Trucks
Jan 23, 2014 | 2000 Mazda B-Series
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: